EZ-LIGHT K90TL Datasheet Large multicolor indicator that alternates between active inputs Bright, uniform indicator light Alternates between colors when multiple inputs are active Models are available with up to five colors in one device Rugged IP67-rated design 12 to 30 V dc operation Model of Colors Colors Input Connection K90TLGRPQ 2 Green, Red 5-pin M12/Euro-style Quick K90TLGYRPQ 3 Green, Red, Yellow Disconnect PNP K90TLBGYRPQ 4 Blue , Green, Yellow, Red 8-pin M12/Euro-style Quick K90TLWBGYRPQ 5 White, Blue, Green, Yellow, Red Disconnect K90TLGRNQ 2 Green, Red 5-pin M12/Euro-style Quick K90TLGYRNQ 3 Green, Red, Yellow Disconnect NPN K90TLBGYRNQ 4 Blue , Green, Yellow, Red 8-pin M12/Euro-style Quick K90TLWBGYRNQ 5 White, Blue, Green, Yellow, Red Disconnect Integral quick disconnect models are listed a mating cordset is required (see Accessories on page 4). To order the 150 mm (5.9 in) PVC pigtail with quick disconnect models, replace Q with QP in the model number, for example, K90TLGRQP. To order the 2 m (6.5 ft) cable modes, omit the suffix Q in the model number, for example, K90TLGR. Original Document 14 December 2016 181766 Rev. D 181766 EZ-LIGHT K90TL Specifications Supply Voltage and Current Connections 12 to 30 V dc Integral 5-pin M12/Euro-style male quick disconnect (QD) Integral 8- pin M12/Euro-style male quick disconnect (QD) 150 mm (6 in) PVC 475 mA maximum at 12 V dc cable with a 5-pin M12/Euro-style male quick disconnect (QD) 150 175 mA maximum at 30 V dc mm (6 in) PVC cable with a 8-pin M12/Euro-style male quick Supply Protection Circuitry disconnect (QD) or 2 m (6.5 ft) unterminated PVC-jacketed cable Protected against reverse polarity and transient voltages depending on the model Input Response Time Indicators 150 ms maximum 2 to 5 colors, depending on the model Light Characteristics Environmental Rating IEC IP67 Enclosure UL Type 4X, 13 Color Typical Wavelength or Typical Intensity Color Temperature Vibration and Mechanical Shock All models meet Mil Std. 202F requirements. Method 201A (vibration: Red 625 nm 65 lumens 10 Hz to 60 Hz max., double amplitude 0.06 inch, maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G 11 ms Yellow 590 nm 35 lumens duration, half sine wave. Green 525 nm 150 lumens Operating Conditions Blue 470 nm 55 lumens 40 C to +50 C ( 40 F to +122 F) Certifications White 60007100 K 200 lumens Construction Base and dome: Polycarbonate Dimensions Models with Quick Disconnect Models with Integral Cable 87 mm 87 mm 3.43 3.43 M30 X 1.5 M30 X 1.5 C 20 mm L 20 mm M12 X 1 0.79 0.79 90 mm 1/2-14 NPT 3.54 C L 90 mm 1/2-14 NPT 3.54 C L C L C L C L Wiring When multiple inputs are on at the same time, the indicator cycles between colors at a rate of 1 Hz. 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 181766 Rev. D