STB Self-Checking Optical Touch Buttons Datasheet Continuous internal self-checking operation Diverse-redundant microcontroller-based photoelectric touch buttons Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation require no physical pressure to operate High excess gain cuts through heavy contamination Immune to ambient light, EMI and RFI interference LED power, output and fault indicators Yellow field cover included U.S. Patent(s) issued or pending Supply DUO-TOUCH SG Model Cable Output Type Voltage Compatibility 4-wire 2 m (6.5 ft) integral STBVP6 cable Complementary 1030V dc STBVP6Q 4-Pin Mini-style QD PNP AT-FM-10K, AT-GM/HM-13A, and STBVP6Q5 4-Pin Euro-style QD AT-GM/HM-11KM Two-Hand Control Modules, and SC22-3 5-wire 2 m (6.5 ft) integral STBVR81 Safety Controller cable Two Individual 2030V ac/dc Complementary STBVR81Q 5-Pin Mini-style QD Relays STBVR81Q6 5-Pin Euro-style QD Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffixW/30 to the cabled model number. For example, STBVP6 W/30. Models with a QD connector require a mating cable. WARNING: Not a Stand-Alone Safety Device. STB Series Touch Buttons are self-checking ergonomic actuating devices, but are not, by themselves, safety devices. To be used in a safety application, two STBs must be interfaced with a type IIIC two-hand-control module, such as the Banner AT-FM-10K, to meet all relevant safety requirements of the appropriate standards (e.g., ISO13851 / EN574). Important - Read This Before Proceeding The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation, operation, and maintenance instructions. Please direct any questions regarding the use or installation of this product to the factory applications department at the telephone numbers or address found at STB Self-Checking Optical Touch Buttons Applicable U.S. Standards ANSI B11 Standards for Machine Tools Safety Contact: Safety Director, AMT The Association for Manufacturing Technology, 7901 Westpark Drive, McLean, VA 22102, Tel.: 703-893-2900 ANSI NFPA 79 Electrical Standard for Industrial Machinery Contact: National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101, Tel.: 800-344-3555 ANSI/RIA R15.06 Safety Requirements for Industrial Robots and Robot Systems Contact: Robotic Industries Association, 900 Victors Way, P.O. Box 3724, Ann Arbor, MI 48106, Tel.: 734-994-6088 Applicable International Standards ISO 12100-1 & -2 (EN 292-1 & -2) Safety of Machinery Basic Concepts, General Principles for Design IEC 60204-1 Electrical Equipment of Machines Part 1: General Requirements ISO 13849-1 (EN 954-1) Safety-Related Parts of Control Systems ISO 13856-1 (EN1760-1), Safety of Machinery Pressure-Sensitive Protective Devices Contact: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5704, Tel.: 800-854- 7179 Overview STB Self-Checking Optical Touch Buttons are touch-activated photoelectric devices designed to replace capacitive touch switches and mechanical push buttons. Their outputs activate while a finger is in the touch area (yoke) of the switch, interrupting the buttons infrared sensing beam. Banner STB Series buttons are ergonomically designed to eliminate the hand, wrist, and arm stresses associated with mechanical push buttons. They require absolutely no physical pressure to operate. LED indicators light when power is on and outputs are activated. All models are immune to EMI, RFI, and ambient light interference. STBs have a black polyetherimide upper housing and yellow PBT base. The 30 mm threaded base on all models provides easy mounting and easy retrofitting into existing applications. Rugged yellow polypropylene (TP) field covers are supplied with all models to prevent inadvertent switch actuation due to objects (such as loose clothing or debris) which might accidentally block the sensing beam. The polypropylene material is capable of absorbing high impact (even at low temperatures) and is highly resistant to abrasion and to damage by most chemicals. WARNING: Point-of-Operation Guarding When properly installed, a two-hand control Switch Yellow device provides protection only for the hands ofTouch Are Polypropylene the machine operator. It may be necessary to (yoke) Field Cover install additional safeguarding, such as safety light screens, additional two-hand controls, and/or hard guards, to protect all individuals from hazardous machinery. Failure to properly guard hazardous Power machinery can result in a dangerous Black Polyetherimide ON/OFF condition which could lead to serious injury LED or death. Output Fault Yellow Fiber LED Reinforced PBT Base Figure 1. STB Touch Button features STB Self-Checking Optical Touch Buttons are very similar to the proven and popular OTB Series buttons. The dual- microcontroller internal design of the new buttons, however, allows the hookup to a Banner DUO-TOUCH SG Two-Hand- Control Safety Module, or other two-hand-control designed to meet Type IIIC requirements per ISO 13851 (EN 574) (requiring 1 normally open and 1 normally closed contact per input channel). These microcontrollers perform a continuous 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 64136 Rev. C