E L B A C R U C P A L L I L A F T EZ-LIGHT Indicators85 to 130 V ac Datasheet AC-operated, multi-color, general-purpose indicators Rugged, cost-effective, and easy-to-install indicators available in K50 or K80 housing style Illumination provides easy-to-see operator guidance and equipment status indication Compact devices are completely self-contained - no controller needed 85 to 130 V ac operation Displays 3 colors Immune to ambient light, EMI, and RFI interference QPMA Contact Banner Engineering for more information. Models 1 2 Model Construction Connection LED Function Inputs 50 mm dome/ 30 mm K50LGRYA120Q mount polycarbonate 3 Color: Green, Red, 5-pin Micro QD 85 to 130 V ac 50 mm dome/Flat or Yellow K80LGRYA120Q DIN-mount polycarbonate Specifications Supply Voltage and Current Connections 85 to 130 V ac at 15 mA max. 5-pin Micro-style integral QD (Q), 150 mm (6 in) pigtail QD (QP), or 2 m (6.5 ft) integral cable, depending on model Supply Protection Circuitry K80L models: terminal-wired models available for use with bulk cable Protected against transient voltages compression fitting optional. Contact Banner Engineering for cable Indicators information. LEDs are independently selected: Green, Red, or Yellow. Operating Conditions Input Response Time 40 C to +50 C ( 40 F to +122 F) Indicator ON/OFF: 1 ms max. 90% at +55 C maximum relative humidity (non-condensing) Environmental Rating Certifications Rated IEC IP67. K50L models fully encapsulated K80L has encapsulated electronics only. K50L QD models meet IP69K, per DIN 40050-9 cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. 1 Integral QD models are listed. For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYA120QP). For 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGRYA120). A model with a QD requires a mating cable (see Cordsets on page 3) 2 Contact Banner Engineering for other colors and color combinations. Original Document 26 January 2015 134548 rev. B 134548 A G C I T P O R E Y L Y T S - O R U E EZ-LIGHT Indicators85 to 130 V ac Dimensions K50L K80L 80.8 mm (3.18 ) 50.0 mm 109.5 mm (1.97 ) 65.0 mm 66.3 mm (4.31 ) (2.56 ) (2.61 ) 38 mm (1.50 )* M30 x 1.5 (mounting nut included) 65.0 mm Max. Torque 4.5 Nm (2.56 ) (40 in-lbf) 20 mm (0.79 ) Internal Threads 11 mm (0.43 ) - 14 NPSM Internal Threads - 14 NPSM 4X 5.5 mm ( 0.22 ) Max. Torque 2.25 Nm Max. Torque 2.25 Nm (20 inlbf) Max. Torque 1.12 Nm (10 inlbf) (20 in-lbf) 26.0 mm with supplied screws (1.02 ) 4X 832 UNC M12 X 1 Max. Torque 1.12 Nm (10 inlbf) Wiring Cabled Models QD Models Key: 1 = Brown 2 = White 3 =Yellow 4 = Black 5 = Blue G = Green R = Red Y = Yellow X = V ac Neutral Z = Input 85 to 130V ac N.C. = Not Used 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 134548 rev. B