VALU-BEAM 912 Series AC- and DC-powered sensors with solid-state outputs For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com Features Choose models for 10 to 30V dc or 24 to 250V ac operation DC models have bipolar solid-state outputs: one NPN (sinking) and one PNP (sourcing) AC models have an SPST solid-state output rated for up to 3/4 amp with simple 2- wire hookup All models have a rear panel sensitivity adjustment and light/dark operate switch DC models include Banners Alignment Indicating Device (AID) system Choose models with integral 2 m (6.5 ) cable or Mini-style QD (quick-disconnect) connector 9 m (30 ) cables are also available Opposed Mode Emitter (E) and Receiver (R) Models OPPOSED Infrared, 880 nm Models Range Cable* Supply Voltage Output Type SMA91E 2 m (6.5 ) 10-250V ac/dc - SMA91EQD 3-pin Mini QD SM91R 2 m (6.5 ) 60 m (200 ) 10-30V dc Bipolar NPN/PNP SM91RQD 4-pin Mini QD SM2A91R 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-wire SM2A91RQD 3-pin Mini QD SMA91ESR 2 m (6.5 ) 10-250V ac/dc - SMA91ESRQD 3-pin Mini QD SM91RSR 2 m (6.5 ) 3 m (10 ) 10-30V dc Bipolar NPN/PNP SM91RSRQD 4-pin Mini QD SM2A91RSR 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-wire SM2A91RSRQD 3-pin Mini QD * 9 m cables are available by adding suffix W/30 to the model number of any cabled sensor (e.g., SMA91E W/30). A model with a QD connector requires a mating cable see Quick-Disconnect Cables on page 10. WARNING: Not To Be Used for Personnel Protection Never use this product as a sensing device for personnel protection. Doing so could lead to seri- ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener- gized or de-energized sensor output condition. P/N 03467 web 4/11/2012 Rev. F VALU-BEAM 912 Series Retroreflective Mode Models P RETRO POLAR RETRO Visible Red, 650 nm Non-Polarized Polarized Models Range Cable* Supply Voltage Output Type Non-Polarized SM912LV 2 m (6.5 ) 10-30V dc Bipolar NPN/PNP SM912LVQD 4-Pin Mini QD 0.15 to 9 m (6 to 30 ) SM2A912LV 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-Wire SM2A912LVQD 3-Pin Mini QD Polarized SM912LVAG 2 m (6.5 ) 10-30V dc Bipolar NPN/PNP SM912LVAGQD 4-Pin Mini QD 0.3 to 4.5 m (1 to 15 ) SM2A912LVAG 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-Wire SM2A912LVAGQD 3-Pin Mini QD Retroreflective range is specified using one model BRT-3 retroreflector (3 diameter). Actual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the retroreflector used. Use polarized models when shiny objects will be sensed. Diffuse Mode Models DIFFUSE Infrared, 880 nm Models Range Cable* Supply Voltage Output Type SM912D 2 m (6.5 ) 10-30V dc Bipolar NPN/PNP SM912DQD 4-Pin Mini QD 760 mm (30 ) SM2A912D 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-Wire SM2A912DQD 3-Pin Mini QD SM912DSR 2 m (6.5 ) 10-30V dc Bipolar NPN/PNP SM912DSRQD 4-Pin Mini QD 380 mm (15 ) SM2A912DSR 2 m (6.5 ) 24-250V ac SPST SCR Solid-state 2-Wire SM2A912DSRQD 3-Pin Mini QD 2 www.bannerengineering.com - tel: 763-544-3164 P/N 03467 web Rev. F