THEINDUSTRIALNETWORKCOMPANY 708FX2 The N-TRON 708FX2 Industrial Ethernet Switch combines outstanding performance and ease of use. It is ideally suited for connecting Ethernet enabled industrial and/or security equipment and is a fully managed switch. PRODUCT FEATURES Six 10/100BaseTX RJ-45 Ports Two 100BaseFX Fiber ports, ST or SC style o o -40 C to 85 C Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-30 VDC) Con gurable Alarm Contact Con gurable Bi-Color Fault Status LED Rapid Spanning Tree Fully Managed Features: This function allows the switch to be con gured in a ring or mesh Full SNMP and Web Browser Management topology, and provides support for redundant path communications Detailed Ring Map and Fault Location Charting with high speed (rapid) healing. N-Ring Technology with ~30ms Healing Remote Monitoring Options N-View OPC Monitoring For ease of configuration and monitoring, the 708FX2 offers Plug-and-play IGMP Support web browser management and N-View OLE for Process Control 802.1Q tag VLAN and Port VLAN (OPC) server software. The N-TRON N-View software can be 802.1p QoS and Port QoS combined with popular HMI software packages to add network traf c EtherNet/IP CIP Messaging monitoring, trending, and alarming to any application LLDP (Link Layer Discovery Protocol) using N-TRON switches. In addition SNMP is Trunking available for switch link and status monitoring. The Alarm Contact and Status LED can be configured to respond to power Mirroring failure on power input 1 or input 2, N-Ring Broken, Partial Break 802.1d, 802.1w, 802.1D RSTP High, Partial Break Low, or if multiple ring managers are detected. DHCP N-Ring Technology Management Features N-TRON s 708FX2 ring manager using N-TRON s N-Ring technology The 708FX2 offers several management functions that can be easily offers expanded ring size capacity, detailed fault diagnostics, and a standard con gured using a web browser. healing time of ~30ms. The 708FX2 ring manager periodically checks the IGMP Snooping - Internet Group Management Protocol is a feature health of the ring via packets. If the ring manager stops receiving these health that allows the 708FX2 switch to forward and lter multicast traf c check packets, it converts the Ring to a linear bus topology within ~30ms. intelligently. When all switches in the ring are N-TRON fully managed switches, a detailed ring map and fault location chart will also be provided on the ring managers VLAN - Virtual Local Area Network allows you to segment the web browser and OPC server to identfy the health status of the ring. N-Link switch in order to create two or more separate local area network allows the linking of two N-Rings. Up to 250 fully managed N-TRON domains. switches can participate in N-Ring topologies. QoS - Quality of Service provides prioritization of network traf c Industrial Packaging and Speci cations in order to provide better network service. The primary goal of QoS is to improve the latency of prioritized Ethernet packets required for The 708FX2 is designed to operate in industrial environments. It ring management, real-time, and other interactive applications. is housed in a rugged steel DIN-Rail enclosure. It has extended industrial specifications and features to meet or exceed the Trunking - Trunking (link aggregation) enables multiple physical operating parameters of the connected equipment. These include ports to be linked together and function as one uplink to another extended temperature ratings, extended shock and vibrations specs, N-TRON trunking capable switch con gured in the same manner, redundant power inputs, and high MTBF (greater than 2M hours). thereby increasing the bandwidth between switches. This con guration can provide increased bandwidth and redundancy to applications Ease of Use requiring high levels of fault tolerant operation. The 10/100BaseTX ports are auto sensing and auto con guring. Port Mirroring - This function allows the traf c on one port to be Each copper port is automatically negotiated for maximum speed duplicated and sent to a designated mirror port. Port mirroring can and performance by default, but can also be hard coded using the be used to monitor Ethernet traf c on the designated source port user interface. A high speed processor allows wire speed capability using the assigned mirror port. on all 100BaseTX ports simultaneously. THEINDUSTRIALNETWORKCOMPANY 708FX2 Industrial Ethernet Switch Ordering Information 708FX2-XX Six 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports 708FXE2-XX-YY Six 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports 700-PM Panel Mount Kit NTPS-24-1.3 N-TRON Power Supply - (1.3 Amp 24VDC) URMK 19 Universal Rack Mount Kit Where: XX = ST or SC, YY = 15, 40 or 80 for Singlemode, Blank for Multimode E = Singlemode, and Blank Otherwise 708FX2 Speci cations Switch Properties Number of MAC Addresses: 8000 100 Mb Fiber Transceiver Characteristics Aging Time: Programmable Fiber Length 2km* 15km** 40km** 80km** Latency Typical: 2.9 s TX Power Min -19dBm -15dBm -5dBm -5dBm Switching Method: Store-and-Forward RX Sensitivity Max -32dBm -29dBm -34dBm -34dBm Wavelength 1310nm 1310nm 1310nm 1550nm Physical * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Height: 2.3 (5.8cm) Connectors Width: 6 (15.3cm) 10/100BaseTX: Six (6) RJ-45 Copper Ports Depth: 3.8 (9.6cm) 100BaseFX: Two (2) SC or ST Weight (max): 1.65 lbs (0.75kg) Fiber Duplex Ports DIN-Rail Mount: 35mm Recommended Wiring Clearance Front: 4 (10.16cm) Electrical Side: 1 (2.54cm) Redundant Input Voltage: 10-30 VDC Regulatory Approvals Input Current (max): 330mA max 24VDC N-TRON Power Supply: NTPS-24-1.3 (1.3 A 24V) FCC/CE (CFR 47, Part 15, Subpart B, Class A) EN 55011 ICES-003- Class A Environmental o o EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4 Operating Temperature: -40 C to 85 C o o Storage Temperature: -40 C to 85 C UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A Operating Humidity: 5% to 95% ANSI/ISA 12.12.01-2007 (Non Condensing) ATEX II 3 G Ex nC (DEMKO 03 ATEX 0316686U) Operating Altitude: 0 to 10,000 ft. ABS Type Approval for Shipboard Applications DNV Type Approval Certi cation EN50155 for Railway Applications Shock and Vibration (bulkhead mounted) GOST-R Certi ed Shock: 200g 10ms RoHS Compliant Vibration/Seismic: 50g, 5-200Hz, Triaxial Designed to comply with: Reliability IEEE 1613 for Electric Utility Substations MTBF: >2 Million Hours NEMA TS1/TS2 for Traf c Control Contact Information Network Media 10BaseT: >Cat3 Cable N-TRON Corp. N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 100BaseTX: >Cat5 Cable Mobile, AL 36609 USA 6330 Cham / Zg Switzerland 100BaseFX TEL: (251) 342-2164 TEL: +41 41 7406636 Multimode: 50-62.5/125m FAX: (251) 342-6353 FAX: +41 41 7406637 100BaseFXE Website: www.n-tron.com Singlemode: 7-10/125m Email: N-TRON info n-tron.com REV 090805 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.