THEINDUSTRIALNETWORKCOMPANY The N-TRON 716FX2 Industrial Ethernet switch combines outstanding performance and ease of use. It is ideally suited for connecting Ethernet enabled industrial and/or security equipment and is a fully managed switch. PRODUCT FEATURES Fourteen 10/100BaseTX RJ-45 Ports Two 100BaseFX Fiber ports, ST or SC style o o -40 C to 70 C Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-30VDC) Con gurable Alarm Contact & Bi-Color Fault Status LED Fully Managed Features: SNMP v1, v2, v3 and Web Browser Management Rapid Spanning Tree Protocol Detailed Ring Map and Fault Location Charting RSTP allows the switch to be con gured in a ring or mesh topology, N-Ring Technology with ~30ms Healing and provides support for redundant path communications with high N-View OPC Monitoring speed (rapid) healing. N-Link Redundant N-Ring Coupling Plug-and-play IGMP Support Remote Monitoring Options 802.1Q tag VLAN and Port VLAN For ease of con guration and monitoring, the 716FX2 offers web 802.1p QoS and Port QoS browser management and N-View OLE for Process Control (OPC) EtherNet/IP CIP Messaging server software. The N-TRON N-View software can be combined with LLDP (Link Layer Discovery Protocol) popular HMI software packages to add network traf c monitoring, Port Trunking trending, and alarming to any application using N-TRON switches. Port Mirroring SNMP is also available for switch link and status monitoring. The alarm 802.1d, 802.1w, 802.1D RSTP contact and status LED can be con gured to respond to power failure on DHCP Server, Option 82 relay, Option 61 power input 1 or input 2, N-Ring Broken, Partial Break High, Partial Management Features Break Low, or if multiple Ring managers are detected. The 716FX2 offers several management functions that can be N-Ring Technology easily con gured using a web browser. N-TRON s 716FX2 Ring Manager using N-TRON s N-Ring IGMP Snooping - Internet Group Management Protocol allows the technology offers expanded ring size capacity, detailed fault 716FX2 switch to forward and lter multicast traf c intelligently. diagnostics, and a standard healing time of ~30ms. The 716FX2 ring VLAN - Virtual Local Area Network allows you to segment the switch manager periodically checks the health of the ring via packets. If the in order to create two or more separate local area network domains. ring manager stops receiving these health check packets, it converts the ring to a linear topology within ~30ms. When all switches in QoS - Quality of Service provides prioritization of the ring are N-TRON fully managed switches, a detailed ring map network traf c in order to provide better network service. QoS and fault location chart will also be provided on the ring managers improves the latency of prioritized Ethernet packets required for web browser and OPC server to identfy the health status of the ring management, real-time, and other interactive applications. ring. N-Link allows the linking of two N-Rings. Up to 250 fully Port Trunking - Trunking (link aggregation) enables multiple managed N-TRON switches can participate in N-Ring topologies. physical ports to be linked together and function as one uplink to Industrial Packaging and Speci cations another N-TRON trunking capable switch con gured in the same The 716FX2 is designed to operate in industrial environments. It manner, thereby increasing the bandwidth between switches. This is housed in a rugged steel DIN-Rail enclosure. It has extended con guration can provide increased bandwidth and redundancy industrial specifications and features to meet or exceed the to applications requiring high levels of fault tolerant operation. operating parameters of the connected equipment. These include Port Mirroring - Allows the traf c on one port to be duplicated extended temperature ratings, extended shock and vibration specs, and sent to a designated mirror port. Port mirroring is used to redundant power inputs, and high MTBF (greater than 2M hours). monitor Ethernet traf c on the designated source port using the Ease of Use assigned mirror port. The 10/100BaseTX ports are auto sensing and auto con guring. DHCP - DHCP Server / Client automates the assignment of IP Each copper port is automatically negotiated for maximum speed addresses. DHCP Option 82 assures that if a device on a and performance by default, but can also be hard coded through the specific port is replaced, the replacement receives the same user interface. A high speed processor allows wire speed capability on all 100BaseTX ports simultaneously. IP address as the original device. THEINDUSTRIALNETWORKCOMPANY 716FX2 Industrial Ethernet Switch Ordering Information 716FX2-XX Fourteen 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports 716FXE2-XX-YY Fourteen 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports 700-PM Panel Mount kit URMK Universal Rack Mount Kit NTPS-24-1.3 N-TRON Power Supply - (1.3 Amp 24VDC) Where: XX = ST or SC E = Singlemode, and Blank Otherwise YY = 15, 40 or 80 for Singlemode, Blank for Multimode 716FX2 Speci cations 100 Mb Fiber Transceiver Characteristics Switch Properties Fiber Length 2km* 15km** 40km** 80km** Number of MAC Addresses: 8000 TX Power Min -19dBm/-14dBm -15dBm/-7dBm -5dBm/0dBm -5dBm/0dBm Aging Time: Programmable RX Sensitivity Max -32dBm -34dBm -34dBm -34dBm Latency Typical: 2.6 s Wavelength 1310nm 1310nm 1310nm 1550nm Switching Method: Store-and-Forward * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Case Dimensions Connectors Height: 2.3 (5.8 cm) 10/100BaseTX: Fourteen (14) RJ-45 Copper Ports Width: 8.3 (21.0 cm) 100BaseFX: Two (2) SC or ST Fiber Duplex Ports Depth: 4,8 (12.1 cm) Weight (max) 3.3 lbs (1.5 kg) DIN-Rail Mount: 35mm Recommended Wiring Clearance Front: 4 (10.16 cm) Electrical Side: 1 (2.54 cm) Redundant Input Voltage: 10-30 VDC (Regulated) Input Current (max): 620mA max. 24VDC N-TRON Power Supply: NTPS-24-1.3 (1.3A 24V) Regulatory Approvals Environmental FCC Title 47, Part 15, Subpart B - Class A ICES-003 - Class A o o Operating Temperature: -40 C to 70 C o o UL Listed (US and Canada) 1604 ANSI/ISA-12.12.01-2007 Storage Temperature: -40 C to 85 C Class I, Div 2, Groups A, B, C, D, and T4A Operating Humidity: 5% to 95% CE: EN61000-6-2:2001: EN61000-4-2, 3, 4, 5, 6 (Non Condensing) Operating Altitude: 0 to 10,000 ft. EN55011:1998+A1:1999+A2:2002-Class A EN50155 for Railway applications Shock and Vibration (bulkhead mounted) GOST-R Certi ed, RoHS Compliant Shock: 200g 10ms Designed to comply with: Vibration/Seismic: 50g, 5-200Hz, Triaxial IEEE 1613 for Electric Utility Substations NEMA TS1/ TS2 for Traf c control Reliability MTBF: >2 Million Hours Contact Information Network Media 10BaseT: >Cat3 Cable N-TRON Corp. N-TRON Europe GmbH 100BaseTX: >Cat5 Cable 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 100BaseFX Multimode: 50-62.5/125 m Mobile, AL 36609 USA 6330 Cham / Zg Switzerland 100BaseFXE Singlemode: 7-10/125 m TEL: (251) 342-2164 TEL: +41 41 7406636 FAX: (251) 342-6353 FAX: +41 41 7406637 Website: www.n-tron.com Email: N-TRON info n-tron.com REV 090806 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.