Cellular Routers 3G UMTS/HSPA+ UR5i v2 Series PRODUCT FEATURES Designed for M2M applications WiFi, M-BUS and Modbus TCP / Modbus RTU Modular design to fit application requirements Single or dual SIM cards for redundant backhaul Up to 5.7 Mbps upload to 14.4 Mbps download LINUX platform & advanced networking functions Advanced security features ORDERING INFORMATION 3G UMTS/HSPA routers, UR5i v2 series, are used to wirelessly Note: Check with your local distributor for availability and options. Contact connect various equipment and devices via Ethernet 10/100 to the Advantech B+B SmartWorx distributors. Internet or intranet. High data transfer speed of up to 14.4 Mbit/s (download) and upload speed up to 5.76 Mbit/s, make it an ideal wireless solution for traffic and security camera systems, individual BB - UR2 X61XXXX computers, LAN networks, automatic teller machines (ATM) and other Accessories self-service terminals, etc. 0 No Accessories (DIN holder included) 1 (set) Accessories with EU power supply Key features 2 (set) Accessories with UK power supply This exceptionally fast 3G UR5i v2 wireless router is equipped with 3 (set) Accessories with Australia power supply one Ethernet 10/100, one USB Host port, one binary Input/Output (I/O) 4 (set) Accessories with US power supply port and one SIM card. To save and backup communication data, a version with 2 x SIM cards is available. A wide range of user-defined Enclosure 1 Plastic enclosure interface options further expands optional Port1 and Port2. (EX: 2 Metal enclosure Ethernet port 10/100, serial interface ports RS232/RS485/RS422/M- Bus/WiFi or (I/O - CNT). Port2 may be equipped with serial interfaces PORT2 RS232/RS485/RS422/M-Bus or (I/O - CNT). Routers are available in (Full version only) either plastic or metal casings. FULL version of the router is equipped 0 No expansion port with GPS. 1 ETH 2 RS232 3 RS485 Configuration is done via protected password web interface. The 4 RS422 3G UMTS/HSPA+ router supports VPN tunnel creation using IPsec, 5 M-BUS OpenVPN and L2TP to ensure safe communication. Web interface 6 CNT (4 BI, 2, 1BO) - I/O port provides statistics about router activities, signal strength, detailed log, 7 WiFi etc. Cellular router supports functions: DHCP, NAT, NAT-T, DynDNS, 8 WMBUS (Wireless M-BUS) NTP, VRRP, control by SMS and many other functions. PORT1 Other diagnostic functions ensuring continuous communication 0 No expansion port include automatic inspection of PPP connection offering an automatic 1 ETH restart feature in case of connection losses, and hardware watchdog 2 RS232 3 RS485 which monitors the status of the router. With the help of a start up 4 RS422 script window you may insert Linux scripts for various actions and, for 5 M-BUS some applications the option to create several different configurations 6 CNT (4 BI, 2, 1BO) - I/O port for one 3G wireless router, profiles (maximum of 4), and the option to 9 Switch switch between them (for example via SMS, binary input status, etc.). Cellular wireless routers can automatically upgrade configuration and Router version firmware from server. This allows mass reconfiguration of multiple B Basic routers at one time. F Full Please note: Isnt possible to have in the router all combinations of the ports. SELECTED APPLICATIONS Please check your chosen variant with your local distributor. Transportation and security IT and communication Self-service terminals Energy and power industry Metrology, alarm and warning systems All product specifications are subject to change without notice. www.advantech-bb.com / Enabling an Intelligent Planet DS UR5iv2 21032017Cellular Routers 3G UMTS/HSPA+ UR5i v2 Series SPECIFICATIONS GPS is not available when the router is equipped with the LTE module 450 MHz FIXED INTERFACES - BASIC VERSION GPS SPECIFICATIONS * Antenna 50 Ohms active 1 Ethernet 10/100 Mbits, independent or bridged 1 SIM SIM Card Protocols NMEA 0183 v3.0 1 I/O Binary input/output Frequency 1575.42MHz Tracking: -161dBm 1 USB USB 2.0 Host, Type A Sensitivity Acquisition (Assisted): -158dBm OPTIONAL INTERFACES Acquisition (Standalone): -145dBm Ethernet (10/100Mbps), RS232, RS422/485, M-BUS Hot start: 1 s 1 PORT 1 I/O Input/Output, Ethernet Switch (with PORT 2) Acquisition time Warm start: 29 s Cold start: 32 s ANTENNA CONNECTORS Horizontal: < 2m (50 %) < 5m (90 %) 2x SMA 50 Ohm Accuracy Altitude: < 4m (50 %) < 8m (90 %) Velocity: < 0.2 m/s FIXED INTERFACES - FULL VERSION 1 Ethernet 10/100 Mbits, independent or bridged CPU & MEMORY 2 SIM SIM Card CPU 32b ARM microprocessor, 0.25 DMIPS per MHz 1 I/O Binary input/output Flash memory 16 MB DDR SDRAM 1 USB USB 2.0 Host, Type A RAM 64 MB OPTIONAL INTERFACES M-RAM 128 kB Ethernet (10/100Mbps), RS232, RS422/485, M-BUS 1 PORT 1 I/O Input/Output, Ethernet Switch (with PORT 2) I/O PORT (CNT) RS232, RS422/485, M-BUS, WMBUS, WiFi 1 PORT 2 Ethernet Switch (with PORT 1) Binary input Reed contact with trigger level 1.3 up to 1.4 V Binary output 100 mA/ max. 30 V 1 Optional 2nd SIM card holder (F router versions) ANTENNA CONNECTORS PARAMETERS - HSPA+ module 3 SMA 50 Ohm Bit rate 14,4 Mbps (DL) / 5,76 Mbps (UL) HSPA+ 3GPP rel. 6/7 standard POWER Data compress 3GPP Source 9 - 36 VDC Bit rate 384 kbps (DL) / 384 kbps (UL) UMTS Idle - 2.6 W 3GPP rel. 4 standard Consumption GPRS - to 3.5 W (GPRS transmission) EDGE bit rate 237 kbps (DL) / 237 kbps (UL) UMTS - to 5.5 W (LTE transmission) GPRS bit rate 85,6 kbps (DL) / 85,6 kbps (UL) GPRS/EDGE MECHANICAL Multislot class 12, CS 1 to 4, 3GPP rel. 99/4 standard Dimension Plastic Version 51 x 87 x 116mm GSM/GPRS/EDGE: Quad band, 850/900/1800/1900 MHz Dimension Metallic Version 42 x 87 x 113mm Support channels UMTS/HSDPA/HSUPA/HSPA+: Five band, Protection IP30 800/850/900/1900/2100 MHz Weight Plastic Version 150g Weight Metallic Version 280g ENVIRONMENTAL Operating Temperature -40 to +75C Storage Temperature -40 to +85C Operating - 0 to 95% relative humidity non condensing Humidity Storage - 0 to 95% relative humidity non condensing WIFI *optional (F router versions) Antenna connector R-SMA 50 Ohms Supported WiFi band 2.4 GHz Standards 802.11b, 802.11g, 802.11n STANDARDS/REGULATION 2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ETSI EN 301 511 V12.5.1, ETSI EN 300 440 V2.1.1, ETSI EN 11b, 11 Mbps: typ. -85 dBm Telecom and Emission 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.1, ETSI EN 300 11g, 54 Mbps: typ. -70 dBm RX Sensitivity 328 V2.1.1, ETSI EN 300 220-2 V3.1.1 (HT20) 11n, MSC7: typ. -66 dBm (HT40) 11n, MSC7: typ. -62 dBm ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-3 V2.1.1, Draft EMC ETSI EN 301 489-52 V1.1.0, ETSI EN 301 489-17 V3.1.1 11b, 11 Mbps: min. 18, typ. 19, max. 20 dBm 11g, 54 Mbps: min. 14.5, typ. 16, max. 17.5 dBm EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 TX Output Power Safety 802.11n (HT20): min. 13.5, typ. 15, max. 16.5 dBm + AC:2011, EN 62311:2008 802.11n (HT40): min. 13.5, typ. 15, max. 16.5 dBm E-Mark EMC for devices E-Mark homologation number: 10R 04 7054 Type of device Access point, station in transportation orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445