EIR410-2SFP-T-0812ds page 1/3
2009 B&B Electronics. All rights reserved
Elinx EIR410-2SFP-T
10 Port Gigabit Industrial Ethernet Switch with 2 RJ-45/SFP Combo Ports for Gigabit Ethernet
8 10/100 Base-T Ethernet Ports
2 RJ-45/SFP Combo Ports for Gigabit Ethernet
3000V EFT & 6000V ESD Protection
Dual 12 to 48 VDC Power Inputs
Wide Operating Temperature
The EIR410-2SFP-T is a 10 Port Unmanaged Industrial Gigabit
Ethernet Switch. In addition to 8 standard copper RJ-45 ports, it
has 2 SFP Combo slots to accommodate Gigabit Fiber.
Small Form-factor Pluggable (SFP) Port: The SFP Port
provides flexibility when planning a network. The slot can accept
any SFP fiber module. Modules are available in multiple formats.
If an SFP module is not inserted, the associated combo port can
be used with standard RJ-45 copper.
High-Speed Transmissions: The EIR410-2SFP-T includes a
switch controller that automatically senses transmission speed
(10/100/1000 Mbps). The RJ-45 interface also auto-detects MDI
or MDI-X, eliminating the requirement for a crossover cable. Each
port is buffered and supports store-and-forward protocol.
Dual Power Input: To reduce the risk of power failure, the
EIR410-2SFP-T provides two 12 to 48 VDC power inputs. If the
power fails, the switch will automatically use the secondary power
input. Also, if the power goes out the corresponding P1 or P2
LED will go out and the Fault LED will light. The contacts for the
alarm output will also open.
Flexible Mounting: The switch features an IP30 metal enclosure
that can be DIN or Panel mounted.
Transient Protection: The power input on the EIR410-2SFP-T
Ordering Information
offers protection up to 3,000 V EFT. The Ethernet ports offer up to
Model Number Description
6,000 V ESD protection. These features make the switch reliable
EIR410-2SFP-T Industrial Gigabit Switch (8 CU, 2 SFP)
Accessories
and suitable for use in harsh electrical environments.
SFP-100FX-M-2KM-T SFP 100Base-FX, MM 2KM, LC
Wide Operating Temperature: With an operating temperature of
SFP-100FX-S-30KM-T SFP 100Base-FX, SM 20KM, LC
SFP-1000SX-M-550M-T SFP 1000Base-FX, MM 550M, LC
-40 to 75C (-40 to 167 F), this switch is suitable for use in some
SFP-1000LX-S-10KM-T SFP 1000Base-FX, SM 10 KM, LC
SFP-1000LX-S-20KM-T SFP, 1000Base-FX, SM 20 KM, LC
of the harshest industrial environments that exist.
MDR-60-24 24VDC, 2.5A DIN Mount Power Supply
Easy Troubleshooting: There are two LED indicators for each
port that display the link status and transmission speed. Three
LED indicators for power (P1, P2 and Fault) show power status.
Specifications
These indicators allow you to quickly diagnose and correct
Regulatory
Approvals FCC, CE, UL
problems and ensure your network remains reliable.
UL File Number: E173795
Free Fall IEC60068-2-32
B&B Electronics Elinx Brand Ethernet Switches are your
Shock IEC60068-2-27
Vibration IEC60068-2-6
number one choice for reliable performance in harsh industrial
environments.
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
EIR410-2SFP-T-0812ds page 2/3
2009 B&B Electronics. All rights reserved
Specifications
IEEE Standards
Power
IEEE 802.3 802.3. 10Base-T Ethernet
Input Voltage Dual 12 to 48 VDC Inputs
IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
Reverse Polarity Protection
IEEE 802.3ab 1000Base-T
Power Connection Removable Terminal Block
IEEE 802.3x Flow Control and Back Pressure
Wire Size 12 to 24 AWG
Network Specifications
Power Use 6.76 Watts
Architecture Back-plane (Switching Fabric): 5.6Gbps
Fault Output 1 Relay Output Normally Closed
Throughput (Full-dux): 8.3Mpps@64bytes
EFT Protection 3000 V EFT Protection
Transfer Rate 14,880 pps Ethernet Port
Environmental
148,800 pps Fast Ethernet Port
Op. Temp - 40 to 75C (-40 to 167F)
1,488,000 pps Gigibit Fiber Ethernet
Storage Temp - 40 to 85C (-40 to 185F)
Buffer 1 MB
Op. Humidity 0 to 95%
MAC Table 8K
Mechanical
Miscl Broadcast Storm Filtering
Enclosure IP30 Metal Enclosure
CSMA/CD
Mounting 35mm DIN Rail or Panel Mount Attachments
Interface
Dimensions 2.86x4.19x6.06 in (7.26x10.64x15.39 cm)
RJ-45 Ports 8 x 10/100 Base T, Auto MDI/MDI-X
ESD Protection 6000V ESD Protection
SFP 2 x Mini-GBIC SFP Combo Ports
LED Indicators P1 (Power 1), P2 (Power 2),
Fault (Power Fault), LINK/ACT (SFP Ports)
RJ-45 Ports have 2 LEDs to indicate LINK
and activity
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS