FOSTCDRI-PH-xx-0812ds page 1/2
2010 B&B Electronics. All rights reserved
FOSTCDRI-PH-xx
Heavy Industrial RS-232/422/485 to Fiber Optic Converter
IEEE-61850-3
IEEE 1613
Multi-mode, Single Mode, ST, SC Versions
-40 to 85C Operating Temperature
Rugged IP30 Metal Panel Mount Case
Specifications
50G Shock, 4G Vibration
Serial Technology
RS-232 TD, RD, GND
2kV Triple Isolation RS-422 TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 4-Wire TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 2-Wire Data A(-), Data B(+)
10 to 48 VDC Input Power
Serial Connector 5 Position, Removable Terminal Block
The ILinx FOSTCDRI-PH-xx is our premium Heavy
Data Rate 9.6 to 115.2 Kbps
Isolation 2 KV RMS, 1 minute
Industrial Serial to Fiber Optic Converter. Designed for rugged
Surge Protection 600 W Peak Power Dissipation
Clamping time < 1 pico-second
industrial environments, it has been put through some of the
Industrial Bus MODBUS ASCII / RTU
Bias Built-in, switchable 1.2K XMT/RCV
most exacting compliance tests in the industry. Meeting the
Termination Built-in, switchable 120
Fiber Optic Technology
requirements of IEC 61850-3 and IEEE 1613, it is suitable for
Type / Wavelength Multi-mode or Single Mode 1310 nM
Output Power (MM) -19 (min), -14 (max) dBm
installation in electrical substations. These specifications are
Output Power (SM) -15 (min), -8 (max) dBm
RCV Sensitivity -32 dBm
more stringent than the NEMA TS1/TS2 requirements for
Cable 62.5 / 125 M (MM), 9 / 125M (SM)
Data Rate 9.6 to 115.2 kbps
transportation applications. Powerful isolation protects your
Distance 2 kM (MM), 15 kM (SM)
Fiber Light Modulated
equipment and data from damaging ground loops and surges.
Power
Source External
Additional isolation on the power supply circuits adds a third
Power Connector 2 Position Removable Terminal Block
Input Voltage 10 to 48 VDC (56 VDC Maximum)
degree of protection.
Power Consumption 0.9 W typical (2.6W with termination)
Terminal Blocks
Packaged in a rugged IP30 metal case, it converts serial
Wire Size Accepted 28 to 12 AWG, Copper wire only
Pitch 5.08 mm
signals to multi-mode or single mode fiber optic. Our bit-wise
Insulation Resistance 500 M @ 500 VDC
Maximum Torque 5 Kg / cm
enabled circuitry automatically detects the data rate without
Indicators
Power Red LED
setting a DIP switch.
TD / RD (Each Port) Green LED
Mechanical
In addition to direct point-to-point connectivity, it is capable
Dimensions 5.2 x 3.7 x 1.3 in
132.4 x 92.9 x 33.0 mm
of operating in multi-drop mode. This enables serial devices to
Enclosure IP30 Metal, Panel Mount
Weight 0.46 lbs (208.65 grams)
communicate with up to 31 others in a fiber ring. Supporting
MTBF 127103 Hours
MTBF Calc. Method Parts Count Reliability Prediction
mixed standards, you can replace other converters and add the
Environmental
Operating Temperature -40 to 85C (-40 to 176F)
EMI / RFI protection inherent to fiber optic communications.
Storage Temperature -40 to 85C (-40 to 176F)
Operating Humidity 0 to 95% Non-condensing
Remember, when it comes to reliable communications in
Regulatory
Approvals FCC, CE, IEC 61850-3, IEEE 1613
harsh industrial environments, B&B Electronics ILinx brand
UL C1 D2, File: E245458
Ordering Information
converters and isolators are your number one choice.
FOSTCDRI-PH-MC Serial to Multi-mode SC
FOSTCDRI-PH-MT Serial to Multi-mode ST
FOSTCDRI-PH-SC Serial to Single Mode SC
FOSTCDRI-PH-ST Serial to Single Mode ST
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
FOSTCDRI-PH-xx-0812ds page 2/2
2010 B&B Electronics. All rights reserved
IEC 61850-3 Electro Magnetic Interference Specifications
Test Description Test Level Level
Enclosure Contact 8 kV 4
61000-4-2 ESD
Enclosure Air 15 kV 4
61000-4-3 Radiated RFI Enclosure Ports 10 V/m 3
Signal Ports 4 kV @ 2.5 Khz ---
61000-4-4 Burst (Fast Transient)
DC Power Ports 4 kV 4
Signal Ports 2 kV line to earth, 1 kV line to line 4
61000-4-5 Surge
DC Power Ports 2 kV line to earth, 1 kV line to line 3
Signal Ports 10 V RMS 3
61000-4-6 Induced (Conductive) RFI
DC Power Ports 10 V RMS 3
Signal Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3
61000-4-12 Damped Oscillatory
DC Power Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3
Signal Ports 30 V Continuous, 300 V for 1 s 4
61000-4-16 Mains Frequency Voltage
DC Power Ports 30 V Continuous, 300 V for 1 s 4
61000-4-17 Ripple on DC Power Supply DC Power Ports 10% 3
IEEE 1613 C37.90 Electromagnetic Interference Specifications
Test Description Test Level Level
Enclosure Contact 8 kV ---
C37.90.3 ESD
Enclosure Air 15 kV ---
C37.90.2 Radiated RFI Enclosure Ports 10 v/m ---
Signal Ports 4 kV @ 2.5 kHz ---
C37.90.1 Fast Transient
DC Power Ports 4 kV ---
Environmental Specifications
Test Description Test Level Level
60068-2-1 Cold Temperature Test Ad (-)40 C, 16 Hours ---
60068-2-2 Dry Heat Test Bd (+)85 C, 16 Hours ---
60068-2-30 Humidity (damp heat cycle) Test Dd 90% (non-condensing) (+)55C, 6 Cycles ---
IEC 60068-2-6 Vibration Test Fc 4g Class 2
IEC 60068-2-27 Shock Test Ea 50g Class 2
IEC 60068-2-32 Drop --- 6 faces, 3 edges, 1 corner, total 10 drops at 1 m ---
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS