Heavy Industrial Serial to Fiber Optic Converters Models BB-FOSTCDRI-PH-MT, BB-FOSTCDRI-PH-SC www.advantech.com PRODUCT FEATURES Converts serial data signals to multi- or single-mode fiber 2kV, 3-way isolation (input, output, power circuits) Data rate: 9.6 to 115.2 kbps (bit-wise enable) -40 to +85 C wide operating temperature IP30 metal panel mount case (DIN rail adaptable) FCC, CE, UL C1/D2 (IEC-61850-3, IEEE 1613) 10-48 VDC power source required (not included, sold separately) Note: 2 units required to extend data via fiber connection BB-FOSTCDRI-PH-xx series are premium, heavy-duty serial to fiber optic ORDERING INFORMATION converters. Designed for rugged industrial environments, they meet some of MODEL NUMBER DESCRIPTION the most exacting compliance testing in the industry including IEC 61850-3 and BB-FOSTCDRI-PH-MT Serial to Fiber Converter,Multi-mode, ST IEEE 1613 for electrical substation installations. (These specifications are more BB-FOSTCDRI-PH-SC Serial to Fiber Converter, Single-mode, SC stringent than NEMA TS1/TS2 transportation application requirements.) Powerful Note: Two units are required to extend data via the fiber optic connection. isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. An external 10-48 VDC power source is required (not included, sold separately). ACCESSORIES sold separately Packaged in a rugged IP30 metal case, these units convert serial signals to BB-MDR-20-24 - DIN Rail Mount Power Supply, 24VDC, 1.0 A Output Power multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically BB-TBKT1 - Replacement Terminal Block - 2-position, 5.08mm, 8A, 300V detects the data rate without setting a DIP switch. BB-TBKT2 - Replacement Terminal Block - 5-position, 5.08mm, 8A, 300V In addition to direct point-to-point connectivity, operation in multi-drop mode is possible. This enables serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add the EMI / RFI protection inherent to fiber optic communications. Note: These converters use a proprietary modulated fiber optic signal. Two units are required to extend the data via the fiber optic connection. Any BB-FOSTCDRi-PH-x converter can (only-) connect to another BB-FOSTCDRi-PH-x converter at the other end of the fiber optic cable. All product specifications are subject to change without notice. BB-FOSTCDRI-PH-MT BB-FOSTCDRI-PH-SC 1120ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.comHeavy Industrial Serial to Fiber Optic Converters Models BB-FOSTCDRI-PH-MT, BB-FOSTCDRI-PH-SC SPECIFICATIONS TERMINAL BLOCKS SERIAL TECHNOLOGY Wire Size Accepted 28 to 12 AWG, copper wire only RS-232 TD, RD, GND Pitch 5.08 mm RS-422 TDA(-), TDB(+), RDA(-), RDB(+) Insulation Resistance 500 M 500 VDC RS-485 4-Wire TDA(-), TDB(+), RDA(-), RDB(+) Maximum Torque 5 kg / cm RS-485 2-Wire Data A(-), Data B(+) INDICATORS Serial Connector 5-position, removable terminal block Power Red LED Data Rate 9.6 to 115.2 Kbps TD / RD (each port) Green LED Isolation 2 KV RMS, 1 minute 600 W peak power dissipation MECHANICAL Surge Protection Clamping time < 1 pico-second Dimensions 13.24 x 9.29 x 3.0 cm Industrial Bus Modbus ASCII / RTU Enclosure IP30 metal, panel mount Bias Built-in, switchable 1.2K XMT/RCV Weight 208.65 gm Termination Built-in, switchable 120 MEANTIME BETWEEN FAILURES (MTBF) FIBER OPTIC TECHNOLOGY MTBF 127103 hours Type / Wavelength Multi-mode or Single-mode 1310 nM MTBF Calc. Method MIL 217F Parts Count Reliability Prediction Output Power (-MM) -19 (min.) -14 (max.) dBm ENVIRONMENTAL Output Power (-SM) -15 (min.) -8 (max.) dBm Operating Temperature -40 to +85 C RCV Sensitivity -32 dBm Storage Temperature -40 to +85 C Cable 62.5 / 125 M (multi-mode), 9 / 125M (single-mode) Operating Humidity 0 to 95%, non-condensing Data Rate 9.6 to 115.2 kbps REGULATORY Multi-mode: 2 km FCC, CE, UL C1/D2 (File: E245458), Distance Approvals Single-mode: 15 km IEC 61850-3, IEEE 1613 Fiber Light Modulated 2004/108/EC Electromagnetic Compatibility Directive 2011/65/EU amended by (EU) 2015/863 Reduction of Hazardous POWER CE - Directives Substances Directive (RoHS) Source External, required (not included, sold separately) 2012/19/EU Waste Electrical and Electronic Equipment (WEEE) Power Connector 2-position, removable terminal block EN 55011 + AC Information Technology Equipment Class A RF Input Voltage 10 to 48 VDC (56 VDC maximum) Emissions Power Consumption 0.9 W typical (2.6W with termination) EN 61000-6-2 Generic Immunity Standard for (Heavy) Industrial Environments CE - Standards EN 55032 Class A Electromagnetic compatibility of multimedia equipment Emission requirements EN 55024 Information Technology Equipment Immunity Characteristics Limits and methods of measurement MECHANICAL DRAWING Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.com