Serial to Single-mode Fiber Converter FOSTCDRi-ST, FOSTCDRi-SC PRODUCT FEATURES Data rates up to 115.2 kbps 15 km (9 mi) range 10 to 48 VDC power input Wide operating temperature 2000V isolation Modbus ASCII/RTU compatible EMI/RFI protection ORDERING INFORMATION B&B Electronics ILinx fiber converters designed with functionality MODEL required for heavier industrial environments. Model FOSTCDRi-Sx SERIAL CONNECTOR FIBER CONNECTOR MODBUS NUMBER industrial-grade isolated converter changes RS-232, RS-422, or RS-485 to Terminal Blocks, FOSTCDRi-SC Single-mode SC single-mode fiber optics. removable Terminal Blocks, FOSTCDRi-ST Single-mode ST removable Designed for industry, FOSTCDRi-Sx extends serial data ranges up to 15 km (9 mi) and provides the most versatile connection possible between asynchronous full or half-duplex serial equipment. In addition to direct ACCESSORIES point-to-point connectivity, it is capable operating in a multi-drop mode. MDR-20-24 - 24 VDC 1.0 A DIN rail mount power supply, slim-line This allows one serial device to communicate with up to 31 others around TBKT1 - Replacement Terminal Block, 2-position, 5.08mm a fiber optic ring. Since it supports mixed serial standards, it can replace other converters and isolators and add the EMI/RFI immunity inherent to TBKT2 - Replacement Terminal Block, 5-position, 5.08mm fiber optic communications. Fiber optic connectors are SC or ST. B&B Electronics Automatic Send Data Control circuit controls the RS- MECHANICAL DIAGRAM - 422/485 driver chip, eliminating the requirement for special software. FOSTCDRI-SC Easy to install and configure, it has a 12-position DIP switch to set up the RS-422/485 parameters and removable terminal blocks to connect serial signals and power. In RS-232 mode, the FOSTCDRI-SC supports Transmit 2.8 cm 1.1 in Data and Receive Data. Handshaking signals are not passed through. Fiber Optic Benefits Fiber optic cable carries serial data up to 15 kilometers (9 miles), much farther and reliably than conventional copper lines. 12.8 cm Power surges, spikes and groupd loops are created by electrical 5.0 in equipment, by nearby lightning strikes, and from other sources. They are easily picked up by copper data lines and transmitted to connected devices, garbling data communications and damaging equipment. However, fiber optic data transmission uses light in glass fiber cable as a communication medium. Being inherently non-electric, fiber optic cable will not pick up noise and provides the most reliable system possible ideal for spanning areas with severe interference, such as near heavy 9.7 cm electrical equipment, welding or radio transmissions. It does not transmit 3.8 in power spikes or surges and prevents ground loops by not providing a conductive path for the ground. WWW.BB-SMARTWORX.COM ENABLING CONNECTED INTELLIGENCE FOSTCDRi-ST, FOSTCDRi-SC 3615dsSerial/Single-mode Fiber Converter FOSTCDRi-ST, FOSTCDRi-SC SPECIFICATIONS SERIAL TECHNOLOGY INDUSTRIAL BUS Data Rate 9.6 to 115.2 kbps Modbus ASCII/RTU RS-232 MECHANICAL Connector Removable Terminal Block (12 to 28 AWG) LED Indicators FO Receive, FO Transmit, Power Signals TD, RD, GND Dimensions 12.8 x 9.7 x 2.8 cm (5.0 x 3.8 x 1.1 in) RS-422/485 Enclosure 35mm DIN Mount, Plastic, IP30 Connector Removable Terminal Block (12 to 28 AWG) Weight 149.7 g (0.3 lbs) RS-485, 2-wire Data A(-), Data B(+), GND ENVIRONMENTAL RS-422/485, 4-wire TDA(-), TDB(+), RDA(-), RDB(+), GND Operating Temperature -40 to +80 C (-40 to +176 F) ISOLATION Storage Temperature -40 to +85 C (-40 to +185 F) Isolation 2KV RMS, 1 minute Operating Humidity 0 to 95% non-condensing Surge Protection 600 W peak power dissipation MTBF 88423 hours Clamping Time < 1 pico-second MTBF Calculation Method Parts Count Reliability Prediction FIBER OPTIC TECHNOLOGY APPROVALS / CERTIFICATIONS - FOSTCDRI-SC Connector ST UL 508, File Number: E222870 Type / Wavelength Single-mode / 1310 nm FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class B Emissions Output Power (-) 15 to (-) 8 dBm CE EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and Light- Receive Sensitivity Less than or equal to (-) 32 dBm Industrial Environments Cable 9/125 micro-meter EN 61000-4-2: 2009 Electro-Static Discharge (ESD) Data Rate 9.6 to 115.2 kbps EN 61000-4-3: 2006 +A1 +A2 +IS1 Radiated Field Immunity (RFI) EN 61000-4-4: 2012 Electrical Fast Transients-Burst Immunity (EFT) Maximum Distance 15 km (9 mi) EN 61000-4-6: 2009 Conducted Immunity POWER Download complete Declaration of Conformity at www.bb.elec.com Source External Input Voltage 10 to 48 VDC (Class 2) Power Consumption 1.4 Watts Connector Removable terminal block (12 to 28 AWG) FIBER OPTIC CABLES MULTI-MODE DUPLEX FIBER LENGTH MODEL NUMBER CONNECTOR TYPE 1M 2M 3M 5M 10M 15M 20M 30M DFMM-LCLC-XX LC TO LC DFMM-SCLC-XX SC TO LC DFMM-SCSC-XX SC TO SC DFMM-STLC-XX ST TO LC DFMM-STSC-XX ST TO SC DFMM-STST-XX ST TO ST SINGLE-MODE DUPLEX FIBER LENGTH MODEL NUMBER CONNECTOR TYPE 1M 2M 3M 5M 10M 15M 20M 30M DFSM-LCLC-XX LC TO LC DFSM-SCLC-XX SC TO LC DFSM-SCSC-XX SC TO SC DFSM-STLC-XX ST TO LC DFSM-STSC-XX ST TO SC DFSM-STST-XX ST TO ST Note: Model Number change the xx to its fiber length number for the actual Model Number. Example: If you want a 1M Multi-Mode LC to LC Fiber the part number would be DFMM-LCLC-1M. orders bb-smartworx.com International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support bb-smartworx.com European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445