Split-core Current Transducer/Sensor Model JC10F50-V www.advantech-bb.com + All-in one structure in a small size + Connect directly to PLCs + Sense motor stalls and short circuits + Industrial instrumentation + Process control loops + Phased fired-controlled heaters + UL, CSA, CE and RoHS available ORDERING INFORMATION OVERVIEW MODEL NUMBER DESCRIPTION The split-core current transducer, Model JC10F50-V, is designed for JC10F50-V Split-Core Current Transducer/Sensor energy management with a convenient connection to electronic sub- metering. It may also be applied for current measurement in a system of distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Other applications SPECIFICATIONS include security and condition monitoring, load monitoring, protection TECHNOLOGY systems, and predictive maintenance of conveyors, pumps, HVAC Current Range motors and more. 50 A RMS (50/60 Hz) Output Voltage 0~5V DC (average) / 0 ~ rated current, 7.5V DC limiter built-in Maximum 100% (continuous) 150% (1 min.) LOAD TREND MONITOR PER DISTRIBUTION PANEL Allowable Current When a sensor outputing analog instrumentation signals in proportion Accuracy/Linearity 2% FS. Dynamic range 1:100 (50/60 Hz sinewave) to load current, is clamped directly onto the main or branch wiring Output Impedance 6.2K of the distribution panel, direct input into analog port as PLC or data Output Ripple logger becomes available without a converter in the middle. Within 5% of output voltage Voltage Response Time 300 ms Insulation DC500V / 100M or more (between core and output terminals) Resistance Dielectric Strength AC 2000V / 1 min. (between core and output terminals) MECHANICAL Sensing Aperture 10mm (clamp-on type) Latch/Unlatch About 150 times Output Terminals 2 x M3-screw with terminal covers Tightening Torque 0.3 Nm Weight 45g (1.59 oz.) ENVIRONMENTAL Operating -20 ~ +50 C, 85% RH, No condensation, In-house & any Conditions direction installable Storage Conditions -30 ~ +90 C, 85% RH, No condensation All product specifications are subject to change without notice. JC10F50-V 0517ds orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445Split-core Current Transducer/Sensor Model JC10F50-V MECHANICAL OUTPUT VOLTAGE DATA Unit = mm CONNECTING THE LEAD WIRE orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445