NTPS-24-1.3 B+B SmartWorx

7010TX THEINDUSTRIALNETWORKCOMPANY PRODUCT FEATURES Eight 10/100BaseTX RJ-45 Ports Two SFP Gigabit ports o o -40 C to 70 C Operating temperature Onboard Temperature Sensor ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-49VDC) Con gurable Bi-Color Fault Status LED FULLY MANAGED FEATURES: The N-TRON 7010TX compact, fully managed industrial SNMP v1, v2, v3 and Web Browser Management Ethernet switch is housed in a rugged industrial metal enclosure Con guration backup via Optional SD card (NTCD) and offers a powerful combination of eight 10/100BaseTX copper ports and two SFP gigabit ports. It is ideally suited for Detailed Ring Map and Fault Location Charting use in industrial and utility applications such as factory oor N-Ring Technology with ~30ms Healing control networks, electric power substations, wind turbines, N-View OPC Monitoring wastewater treatment facilities, intelligent traf c control and N-Link Redundant N-Ring Coupling transportation applications, and any other application where high reliability, superior noise immunity, extreme ruggedness, IGMP Auto con guration and extended distance are required. 802.1Q tag VLAN and Port VLAN Remote Monitoring Options - Web browser and N-View 802.1p QoS, Port QoS, and DSCP OPC (OLE for process control) server software provides EtherNet/IP CIP Messaging con guration and monitoring capability. N-View software easily combines with HMI software to monitor network traf c, LLDP (Link Layer Discovery Protocol) alarms, and trends. SNMP is also available for switch link and Port Trunking status monitoring. Status LEDs are con gurable to indicate Port Mirroring power failure and N-RING status. 802.1d, 802.1w, 802.1D RSTP N-Ring Technology - N-Ring technology provides expanded ring capacity, detailed fault diagnostics, and fast 30ms healing DHCP Server, Option 82 relay, Option 61 time. The ring manager validates the integrity of the ring using Local Port IP Addressing health check packets and quickly converts the ring to a linear topology within ~30ms when an error is detected. The health status of a ring comprised of all N-Tron fully managed switches may be monitored. A detailed ring map and fault location chart may be accessed by the ring manager s web browser or the OPC server. N-Link allows the linking of two N-Rings. Up to 250 fully managed N-TRON switches are supported in an N-Ring topology. Industrial Speci cations - High MTBF, extended shock and vibration speci cations, wide operating temperaturerange and redundant power inputs are standard features. Ease of Use - The 10/100BaseTX ports are auto sensing and auto con guring. Each copper port is automatically negotiated for maximum speed and performance by default, but can also be hard coded through the user interface. A high speed processor allows wire speed capability on all 10/100BaseTX ports simultaneously. THEINDUSTRIALNETWORKCOMPANY 7010TX Industrial Ethernet Switch Ordering Information 7010TX Eight 10/100BaseTX Ports, Two Optional Gigabit SFP Ports NTSFP-TX Optional SFP (Mini-GBIC) Transceiver with One 1000BaseT GB Copper Port NTSFP-SX Optional SFP (Mini-GBIC) Transceiver with One 1000BaseSX Multimode GB Fiber Optic Port NTSFP-LX-ZZ Optional SFP (Mini-GBIC) Transceiver with One 1000BaseLX Singlemode GB Fiber Optic Port NTCD128 Optional con guration card for backup / restore NTPS-24-1.3 N-TRON Power Supply - (1.3 Amp 24VDC) CPMA-1 Compact Panel Mount (factory installed option) URMK Universal Rack Mount Kit Where: ZZ = 10, 40, or 70 for GB Singlemode If SFP Transceiver is not speci ed at the time of purchase, slots will remain blank with covers 7010TX Speci cations Switch Properties Number of MAC Addresses: 8000 SFP Gigabit Fiber Transceiver Characteristics Aging Time: Programmable Fiber Length 550m for 50/125 m 10km** 40km** 70km** Latency Typical: 2.6 s TX Power Min -9.5dBm/-4dBm -9.5dBm/-3.5dBm -2dBm/3dBm 0dBm/5dBm Switching Method: Store-and-Forward -23dBm RX Sensitivity Max -17dBm -20dBm -22dBm Case Dimensions Wavelength 850nm 1310nm 1310nm 1550nm Height: 4.3 (11 cm) Assumed Fiber Loss .45dB/km .35dB/km .25dB/km Width: 2.4 (6.1 cm) Laser Type VCSEL FP DFB DFB Depth: 4.6 (11.5 cm) * SX Fiber Optic Cable ** LX Fiber Optic Cable Weight (max): TBD DIN-Rail Mount: 35mm Electrical Connectors Redundant Input Voltage: 10-49 VDC (Regulated) 10/100BaseTX: Eight (8) RJ-45 Copper Ports 1000BaseSX: Up to Two (2) LC Duplex Gigabit Input Current (max): 400mA max. 24VDC Fiber Ports (optional) N-TRON Power Supply: NTPS-24-1.3 (1.3A 24V) Recommended Wiring Clearance Environmental o o Front: 4 (10.2 cm) Operating Temperature: -40 C to 70 C o o Side: 1 (2.6 cm) Storage Temperature: -40 C to 85 C Operating Humidity: 5% to 95% Regulatory Approvals (Non Condensing) FCC Title 47, Part 15, Subpart B - Class A ICES-003 - Class A Operating Altitude: 0 to 10,000 ft. GOST-R Certi ed, RoHS Compliant Shock and Vibration (bulkhead mounted) Designed to comply with: Shock: 200g 10ms IEEE 1613 for Electric Utility Substations Vibration/Seismic: 50g, 5-200Hz, Triaxial NEMA TS1/ TS2 for Traf c control IEC-61850 Reliability MTBF: >2 Million Hours Network Media 10BaseT: >Cat3 Cable 100BaseTX: >Cat5 Cable 1000BaseTX: >Cat5e Cable Contact Information N-TRON Corp. N-TRON Asia N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Unit 1209, Level 12 Alte Steinhauserstr 19 Mobile, AL 36609 USA Chong Hing Finance Center 6330 Cham / Zg Switzerland TEL: (251) 342-2164 288 Nanjing Road West TEL: +41 41 7406636 FAX: (251) 342-6353 200003 Shanghai FAX: +41 41 7406637 Website: www.n-tron.com P.R. China Email: N-TRON info n-tron.com TEL: +86-021-6133-7770 REV 100209 FAX: +86-021-6133-7999 2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.