Managed Industrial Ethernet Switches 8, 10, 16, 18 port Ethernet Switches Models SE408-T, SEC410-2SFP-T, SE416-T, SEC418-2SFP-T www.advantech-bb.com Features & Benefits 8-port or 16-port 10/100 Mbps 8-port or 16-port 10/100 Mbps + 2-port Gigabit Combo (RJ45 or SFP) Uplink Layer 2 Managed functionality and advanced diagnostic tools Support IGMP snooping to forward and filter multicast traffic intelligently Support RSTP standard redundancy protocol to integrate into standard system Energy Efficient Ethernet (EEE), IEEE 802.3az for low energy consumption IXM function enables the cross management for fast deployment X-Ring Elite function offers self-healing recovery time less than 20 ms SE408-T SEC410-2SFP-T SE416-T SEC418-2SFP-T Redundant Power Inputs (8.4 - 57.6 VDC) Wide operating temperature range -40 to +75C UL508 certified for Industrial Control Panel UL C1D2, ATEX Zone 2 and IECEx certified for Hazardous Environments Essential L2 Managed Features in Automation Introduction IEEE802.3az Energy-Efficient Ethernet (EEE) is a set of enhancements The SE400 series is a managed Ethernet switch with industrial, ruggedized features to the twisted-pair and backplane Ethernet family of computer networking designed to work in harsh, wide temperature environment applications. This switch standards that allows for less power consumption during periods of low data offers all the features expected in a managed switch such as VLAN, IGMP Snooping, activity. Network Redundancy, Link Aggregation, SNMP V1,V2c,V3 and Web Management. IXM Offers auto synchronization function of both firmware and configuration Comprehensive network security features such as 802.1x, DoS prevention, Multiple settings to make middle/large-scale deployment of multiple switches fast and account setting, Storm control, SNMPv3 (Encryption)and Radius are also offered. easy. A built- in Web GUI feature, no need for extra software to be installed on a computer. Embedded into each switch is the industry leading eWorx IXM cross management RSTP/STP IEEE standard self-healing/ring recovery technology. Reduce technology. IXM allows the installer to auto synchronize firmware updates and redundant network cabling and planning costs and ensure high reliability of push configuration settings to either individual or groups of switches. IXM provides your industrial network applications. maintenance and provisioning functionality to both the SE400 and SE500 family Multiple Account Access This feature allows the network manager to switches without the need of extra software or trained personal. IXM speeds up switch create user accounts with differing permissions. User IDs can be created with deployment and ensures network stability. a wide variety of access - from simple device monitoring to full maintenance accessibility, thus ensuring security and offering flexibility for field deployment. The eWorx SE400 series switches feature a powerful suite of diagnostic, monitoring IGMP Snooping v1/v2/v3 The Internet Group Management Protocol is and network performance capabilities: Cable diagnostics, IPv4/IPv6 ping, fiber SFP a feature that allows the managed switch to forward and filter multicast traffic monitoring (DDMI), port utilization, traffic statistics, QoS and rate limiting - all available intelligently, designed for the video streaming and automation control network from the Web GUI. These advanced features offer quick and easy troubleshooting. applications. VLAN - Virtual Local Area Network allows you to segment the different network domains in a switch, also isolate the different network group as security Specifications consideration. COMMUNICATIONS QoS - Quality of Service provides the network packet prioritization in order IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3z, 802.1p, 802.3az, 802.1w, to provide better network service. The main goal of QoS is to improve the Standards 802.1Q, 802.1X, 802.1ad latency of prioritized Ethernet packets required for time-sensitive and real-time 10/100 Base-T(X), Optional 100Base-FX, interactive applications in automation. LAN 1000Base-SX/LX/LHX/XD/ZX/EZX Cable Diagnostics This feature will enable you to verify the length of a Transmission Ethernet: 100m (4-wire Cat.5e, Cat.6 RJ-45 cable suggested for GB port) SFP: cable right from the switch to the other end. This is essential in diagnosing Distance 110km (depends on SFP) faults as a break in the cable can be easily identified on a single wire within the Ethernet: 10/100Mbps Auto-Negotiation Transmission cable, as well as shorts and crossed-pairs. Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation Speed IPv6 A future-proof feature, IPv6 (Internet Protocol version 6) is a set of Gigabit Fiber: Up to 1000Mbps specifications from the Internet Engineering Task Force (IETF) that is an INTERFACE upgrade of existing IP version 4 (IPv4). The basics of IPv6 are similar to those 8 x RJ45 / 16 x RJ45 - SE408-T / SE416-T of IPv4 - devices can use IPv6 as source and destination addresses to pass 8 x RJ45 / 16 x RJ45 + 2 x (RJ45/SFP) combo ports - SEC410-2SFP-T / Connectors SEC418-2SFP-T packets over a network. 1 x Reset button Ease of Use 10/100BaseTX or 10/100/1000 Mbps ports are auto sensing 6-pin removable screw terminal (power & relay) and auto configuring. Each copper port is automatically negotiated for Ethernet Auto Sensing, 10/100BaseTX, 10/100/1000BaseTX, Duplex and MDIX maximum speed and performance by default, but can also be configured PWR1, PWR2, SYS, Alarm and R.M. individually via the user interface. A powerful inside processor allows wire LED Indicators 10/100 T(X): Link/Activity, Speed Gigabit Copper: Link/Activity, Speed SFP: Link/ speed capability on all. Activity All product specifications are subject to change without notice. SE400 ManagedSwitches-WideTemp 1017 orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445Managed Industrial Ethernet Switches 8, 10, 16, 18 port Ethernet Switches Models SE408-T, SEC410-2SFP-T, SE416-T, SEC418-2SFP-T Hardware Properties Software Properties SWITCH PROPERTIES POWER Max. 5.2W - SE408-T MAC Table Size 8k Max. 5.8W - SEC410-2SFP-T Power Consumption Packet Buffer Size 4.1 Mbits Max. 8W - SE416-T Max. 8.2W - SEC418-2SFP-T 1.6 Gbps - SE408-T 5.6 Gbps - SEC410-2SFP-T Power Input 12 ~ 48 VDC (8.4~57.6 VDC) redundant dual inputs Switching Capacity 3.2 Gbps - SE416-T Fault Output 1 Relay Output 7.2 Gbps - SEC418-2SFP-T Packet Buffer Size 9,216 bytes Reverse Polarity Protection Present Priority Queues 8 Overload Current Present Maximum Number of PHYSICAL 256 Available VLANs Dimensions 43 x 120 x 84 mm - SE408-T VLAN ID Range 1 to 4094 (WxHxD) 74 x 120 x 84 mm - SEC410-2SFP-T, SE416-T, SEC418-2SFP-T IGMP Groups 256 Protection Class IP30 enclosure Net: 0.67 kg. Gross: 0.72 kg - SE408-T SOFTWARE Weight Net: 1 kg. Gross: 1.2 kg - SEC410-2SFP-T, SE416-T, SEC418- Web interface, WebAccess NMS, Multiple user accounts, LLDP, 2SFP-T Management SNMP v1/v2c/v3, Traps, SNTP, Standard MIB, Private MIB Enclosure Metal Shell Mounting DIN-Rail, Wall Mount HTTP/TFTP, IPv4/IPv6, DHCP client, DHCP 82, Flow control, Configuration Ingress/Egress Rate limit, Jumbo frame ENVIRONMENT Operating Temperature -40 to +75C (-40 to +167F) 802.1x, DoS prevention, RADIUS, Multiple account setting, Security Storm control, SNMPv3 (Encryption) Storage Temperature -40 to +85C (-40 to +185F) Operating Humidity 10 to 95% (non-condensing) Redundancy X-Ring Elite, STP/RSTP, LACP (Link Aggregation Control Protocol) Storage Humidity 10 to 95% (non-condensing) Monitoring Port statistics & utilization, LLDP/IGMP/MLD statics, Loop detection 4,176,861 hours - SE408-T 3,183,604 hours - SEC410-2SFP-T Multicast (IGMP Snooping/Querier), Unknown multicast filtering, MTBF 2,788,343 hours - SE416-T Filter 802.1Q, VLAN, Port-based VLAN, GVRP, QoS (IEEE 802.1p) with 8 2,825,281 hours - SEC418-2SFP-T classes and TOS/DiffServ, Flow control CERTIFICATIONS Industrial Protocol Modbus/TCP Hazardous Environments UL Class 1 Division 2 Groups A,B,C,D ATEX Zone 2, IECEx Cable Diagnostic, IPv4/IPv6 Ping Test, Syslog, Port Mirror, DDM Safety UL508 Diagnostics (Digital-Diagnostic-Monitoring), Port Mirroring 1:1 and N:1 EMI FCC Part 15 Subpart B Class A, EN 55011/55022, Class A IXM Cross management platform for fast deployment, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3) Enhanced Configuration backup manager, Import/ Export configuration files, EMS EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3) Provisioning firmware upgrades. EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3) Shock IEC 60068-2-27 Remote reboot/reset device, Dual Image,Multiple account setting Miscellaneous Freefall IEC 60068-2-32 (Admin/User), Watchdog Vibration IEC 60068-2-6 Product Ordering Information RJ45 FIBER COMBO PORT OPERATING 10/100 100/1000 MODEL DESCRIPTION 10/100/1000BASE-T(X) CONNECTOR TEMPERATURE MBPS BASE-SFP OR 100/1000BASE-SFP SE408-T 8-port 10/100Mbps Managed Ethernet Switch -40 ~ 75C 8 - - - SEC410-2SFP-T 8-port 10/100Mbps + 2-port GbE Combo (SFP or Copper) Managed Ethernet Switch -40 ~ 75C 8 - 2 LC (SFP) SE416-T 16-port 10/100Mbps Managed Ethernet Switch -40 ~ 75C 16 - - - SEC418-2SFP-T 16-port 10/100Mbps + 2-port GbE Combo (SFP or Copper) Managed Ethernet Switch -40 ~ 75C 16 - 2 LC (SFP) Accessories - Optional (sold separately) Accessories - WebAccess/NMS, Networking Management Software (sold separately) OPERATING MODEL DESCRIPTION TEMPERATURE MODEL DESCRIPTION MDR-20-24 DIN Rail Power Supply, 24VDC, 20W, 1.0A -20~70 C Trial Version 6 Months Free Trial -- ask your local sales representative MDR-40-24 DIN Rail Power Supply, 24VDC, 40W, 1.7A -20~70 C NMS-U050-ULE Supports maximum 50 nodes SDR-120-24 DIN Rail Power Supply, 24VDC, 120W, 5A -20~70 C NMS-U300-ULE Supports maximum 300 nodes SDR-240-24 DIN Rail Power Supply, 24VDC, 240W, 10A -20~70 C NMS-U01K-ULE Supports maximum 1,000 nodes NMS-U04K-ULE Supports maximum 4,000 nodes Package Checklist Ethernet Switch, Protective Caps for unused ports, Quick Start Guide, DIN-Rail mount Warranty bracket (installed), wall mount bracket. Limited lifetime warranty for B+B SmartWorx designed and/or manufactured products. orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445