35XP Beha-Amprobe

Data Sheet 35XP-A Digital Multimeter A compact, full-featured digital multimeter for plant maintenance, HVAC, electrical and electronic applications. Temperature measurement Capability to 1000 C/1832 F (Type K thermocouple included) 750 V AC/1000 V DChighest voltage rating in this class of meter Capacitance for motor run/start test 0.1 A resolution for flame sensor testing Frequency to 1 MHz Resistance to 40 M W No hassle Data Hold freezes display warranty Magne-Grip holster No waiting. VolTect non-contact voltage No shipping detector charges. Triple safety ratings Our commitment to high-quality products 35XP-A and customer service is demonstrated by our industry exclusive No Hassle warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: 500 MSLP limit) CAT 1000V 600V 300V Amprobe Test Tools www.Amprobe.com35XP-A Digital Multimeter Data Sheet General Specifications Display 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999 Polarity Automatic, positive implied, negative polarity indication Overrange (OL) or (-OL) is displayed Zero Automatic Low Battery Indication The M is displayed when the battery voltage drops below the operating level Auto Power Off Approx. 10 minutes Measurement Rate 2 times per second, nominal Operating Environment 0 C to 50 C at <70 % R.H. Storage Temperature -20 C to 60 C, 0 to 80 % R.H. with battery removed from meter Accuracy Stated accuracy at 23 C 5 C, <75 % relative humidity Temperature Coefficient 0.1 x (specified accuracy) per C (0 C to 18 C, 28 C to 50 C) Altitude 2000 m Power Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 Battery Life 150 hours typical with carbon-zinc, 300 hours typical with alkaline Dimensions (H x W x D) 155 mm x 72 mm x 32 mm Weight Approx. 400 g including battery Warranty One-year Specifications Function Range Accuracy Voltage DC Volts Ranges 400 mV, 4 V, 40 V, 400 V, 1000 V (0.5 % rdg + 1 dgt) AC Volts (45 Hz to 500 Hz) Ranges 400 mV (45 Hz to 100 Hz) (1.5 % rdg + 5 dgts) 4 V, 40 V, 400 V, 750 V (1.5 % rdg + 5 dgts) Resolution 100 V Input Impedance 400 mV: >100 M W 4 V: 10 M W 40 V to 1000 V: 9.1 M W Overload Protection 1000 V DC or 750 V AC RMS Current DC Current Ranges 400 A, 4000 A, 40 mA, 400 mA (1.0 % rdg + 2 dgt) 2 A (2.0 % rdg + 3 dgts) AC Current (45 Hz to 500 Hz) Ranges 400 A, 4000 A, 40 mA, 400 mA (1.5 % rdg + 5 dgts) 2 A (2.5 % rdg + 5 dgts) Resolution 0.1 A Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input Burden Voltage 500 mV max. (2 V max. on 4 mA, 400 mA ranges) Resistance 400 W, 4 k W, 40 k W, 400 k W, 4 M W (1.0 % rdg + 4 dgts) 40 M W (2.0 % rdg + 5 dgts) Resolution 100 m W Open Circuit Voltage -0.45 V DC typical, (-1.2 V DC on 400 W range) Overload Protection 1000 V DC or 750 V AC RMS Amprobe Test Tools www.Amprobe.com