AMP-210-EUR Beha-Amprobe

AMP-200 Series TRMS Clamp Meters The Modern Evolution of the Professional Clamp Meter Amprobes AMP-210 and AMP-220 600 A TRMS Clamp Meters offer a complete range of measuring functions for todays modern electrical environments. Both models feature True-RMS sensing, low pass filters and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. AMP-200 Series Features True-RMS Low Pass Filter Amp-Tip Functions Non-Contact Voltage Detection (NCV) Audible Continuity and Diode Test Data Hold, Relative Zero Large LCD Backlit Display Safety Rated: CAT III 600 V AMP-210 AMP-220 AC Clamp Meter AC/DC Clamp Meter Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2014 Amprobe For detailed specifications and ordering go to www.Amprobe.com 6003569 BAMP-200 Series Product Details True-RMS for accurate Non-contact voltage Measurements: voltage measurements in detection (NCV) Voltage Resistance noisy environments. Up to 600 V AC/DC Up to 60.00 k Audible continuity and AC current Capacitance Low pass filter diode test Up to 600 A Up to 2500 F for current and voltage Data hold, relative zero, measurements on variable DC Current frequency drives. MAX/MIN/AVG mode Up to 600 A (AMP-220 only) Amp-Tip function Large LCD backlit Frequency for precise low current display 5.00 to 999.9 Hz measurement of small diameter wires down to 0.1 Safety rated Amp to help with electrical CAT III 600 V system troubleshooting. AMP-200 Series Applications AMP-210 AC Clamp Meter AMP-220 AC/DC Clamp Meter Accurate measurement of current, voltage Low pass filter allows measurement of current and frequency on all electrical systems including and voltage on variable frequency drives (motors distorted, non-sinusoidal signals (True-RMS function) with speed controlled by frequency). Without this and variable frequency drives (low-pass filter). feature, the meter would provide erroneous readings when measuring voltage and current. Capacitance measurement for start and run motor capacitors. Resistance and continuity functions to verify quality of electrical connections and to check if motor and transformer coils are working properly. Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2014 Amprobe For detailed specifications and ordering go to www.Amprobe.com 6003569 B