Product: 1189A Broadband Coax, Series 6, 18 AWG Solid BCCS, Quad Shield, PVC Jkt, CM Product Description Broadband Coax, Series 6, 18 AWG Solid Bare Copper Covered Steel Conductor, PE Insulation, Foil + 60% Aluminum Braid + Foil + 40% Aluminum Braid Shield, PVC Jacket, CM Technical Specifications Product Overview Suitable Applications: Broadband, Cable Television (CATV), RF drop cable, Over-The-Air (OTA) antennas Construction Details Series Type: 6 Conductor AWG Stranding Nom. Diameter Material 18 Solid 0.040 in BCCS - Bare Copper Covered Steel Insulation Material Nom. Diameter PE - Polyethylene (Foam) 0.180 in Outer Shield Material Layer Outer Shield Type Material Material Trade Name Coverage 1 Tape Tri-Laminate (Alum+Poly+Alum) Duobond II 100% 2 Braid Aluminum 60% 3 Tape Tri-Laminate (Alum+Poly+Alum) Duofoil 60% 4 Braid Aluminum 40% Outer Jacket Material Material Nom. Diameter PVC - Polyvinyl Chloride 0.294 in Electrical Characteristics Return Loss (RL) Frequency MHz Min. Structural Return Loss dB 5 - 1000 MHz 20 dB Attenuation Frequency Max. Attentuation dB/100ft 5 MHz 0.58 dB/100ft 55 MHz 1.60 dB/100ft 211 MHz 3.05 dB/100ft 250 MHz 3.30 dB/100ft 270 MHz 3.37 dB/100ft 300 MHz 3.55 dB/100ft 330 MHz 3.74 dB/100ft350 MHz 3.85 dB/100ft 400 MHz 4.15 dB/100ft 450 MHz 4.40 dB/100ft 500 MHz 4.66 dB/100ft 550 MHz 4.90 dB/100ft 600 MHz 5.10 dB/100ft 750 MHz 5.65 dB/100ft 870 MHz 6.11 dB/100ft 1000 MHz 6.55 dB/100ft Electricals Nom. Conductor DCR Nom. Outer Shield DCR Nom. Capacitance Cond-to-Shield Nom. Impedence 28 Ohm/1000ft 4.8 Ohm/1000ft 16.2 pF/ft 75 Ohm Voltage UL Voltage Rating 300 V (CM) Mechanical Characteristics Temperature Operating -40C to +75C Bend Radius Installation Min. 2.9 in Bulk Cable Weight: 32 lbs/1000ft Max. Pull Tension: 176 lbs Standards and Compliance Environmental Suitability: Indoor (Not Riser or Plenum), Indoor, Sunlight Resistance Sustainability: CA Prop 65 Flammability / Fire Resistance: UL1685 UL Loading NEC / UL Compliance: CM, CATV CEC / C(UL) Compliance: CM European Directive Compliance: EU CE Mark, EU Directive 2015/863/EU, EU Directive 2011/65/EU (ROHS II), EU Directive 2012/19/EU (WEEE) APAC Compliance: China RoHS II (GB/T 26572-2011) Other Standard Compliance(s): ANSI/SCTE 74 Plenum Number: 1189AP History Update and Revision: Revision Number: 0.366 Revision Date: 08-25-2020 2020 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on anASI basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden s standard terms and conditions of sale. Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden s knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.