Product Datasheet Belden 1667E P/N - 46101 Rev.3A Page 1 of 2 TWIN CAT 5 enhanced UTP PVC Date 01-05-2001 Application Horizontal and building backbone cable. Support current Category 5 and Category 5 enhanced applications, such as: 10 Base-T, 100 Base-T, 1000 Base-T (Gigabit Ethernet), FDDI, ATM Standards General standards: ISO/IEC 11801, EN 50173, TIA/EIA 568-A-5 enhanced nd nd Future standards like: ISO/IEC 11801 2 edition, EN 50173 2 edition und prEN 50288-3-1 Construction & Dimensions Construction: Unshielded 2x4 twisted pairs Conductor: solid bare copper Conductor diameter: AWG 24 (0,51 mm) Conductor insulation material: Polyethylene (PE) Colour code Diameter over insulation: 0.90 mm 0.05 mm Pair 1 White-Blue/Blue Jacket material: PVC (Flame retardant) Pair 2 White-Orange/Orange Outer diameter: 5.0 mm 0.3 mm x 10.5 mm Pair 3 White-Green/Green Pair 4 White-Brown/Brown Electrical characteristics (at 20 C) Attenuation Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Max.) 4.0 4.0 6.3 8.0 9.0 11.4 16.5 21.3 dB/100m Typical 1.9 3.9 6.2 7.9 8.9 11.2 16.0 19.8 dB/100m NEXT (Near end crosstalk) Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Min.) 60.0 56.3 50.3 47.3 45.8 42.9 38.4 35.3 dB Typical 73 64585554514744 dB Power sum NEXT Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Min.) 57.0 53.3 47.3 44.3 42.8 39.9 35.4 32.3 dB/100m Typical 71 62565352494542 dB/100m Power sum ELFEXT Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Min.) 60.8 48.7 40.8 36.7 34.7 30.9 24.8 20.8 dB/100m Typical 71 59514643393328 dB/100m ACR Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Min.) 56 52 44 39 37 31 22 14 dB/100m Typical 71 61524845403124 dB/100m Power sum ACR Frequency 1 4 10 16 20 31.25 62.5 100 MHz 1) Spec. (Min.) 53 49 41 36 34 28 19 11 dB/100m Typical 69 59504643382922 dB/100m 1) : Specification values according to cable requirements of ISO/IEC 11801 category 5 enhanced Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. All printing errors are subject to correction. Technical apecifications are subject to change without notice.Product Datasheet Belden 1667E P/N - 46101 Rev.3A Page 2 of 2 TWIN CAT 5 enhanced UTP PVC Date 01-05-2001 Electrical characteristics (at 20 C) Nominal mutual capacitance at 1 kHz 50 nF/km Maximum conductor DCR 93.5 Ohm/km NVP - Nominal Velocity of Propagation 0.70 c SKEW Propagation delay difference (100 MHz) typical 15 ns/100m Impedance 1 - 100 MHz 100 15 Ohm General and environmental characteristics Temperature range - operation -20C - +60C Temperature range - installation +0C - +50C Minimum bending radius - operation 20 mm Minimum bending radius - installation 40 mm Maximum pulling tension 80 N Flame retardancy IEC 332-1 Energy of flame 600 kJ/m Weight (approx.) 56 kg/km Maximum operating voltage 48 V rms 1.4 A Maximum continuous current per conductor (25C) Ordering information MARKING Text on the cable jacket Inkjet printing BELDEN 1667E UTP CAT5E 2x4PR AWG24 ISO/IEC 11801 EN 50173 VERIFIED 100 OHM Meter marking: Yes JACKET COLOUR Colour RAL code Belden colour code Grey RAL 7032 2833 PACKAGING (PUT UP) Belden code Delivery length Weight Remark 46101 xxxx 079 305 m 17.0 kg Non returnable reel 46101 xxxx 240 500 m 28,0 kg Non returnable reel xxxx: Belden colour code Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. All printing errors are subject to correction. Technical apecifications are subject to change without notice.