4200UE.00100 Belden

TECHNICAL DATA SHEET code concept version 1 date 2004-04-20 4200UE NON-PAIRED page 1/2 APPLICATION Commercial applications CONSTRUCTION 1. Conductor Diameter of conductor 1.45mm (AWG16) Material stranded bare copper (19xAWG29) 2. Insulation Material PE Diameter over insulation 1.95 0.05 mm Wallthickness 0.25 mm 3. Overall Cabling Colour code black red 4. Sheath Material FRNC Colour Grey Nominal thickness of sheath 0.38 mm Diameter over sheath 4.7 0.30 mm REQUIREMENTS AND TEST METHODS Electrical: Nominal resistance conductor 13.8 /km Nom. capacitance conductor to conductor 1kHz 105 pF/m Testvoltage conductor-conductor 2500 VDC, 3 seconds Voltage rating 300 V RMS Maximum continues current per conductor 25 C 6.25 A per conductor 25 C Mechanical and physical: Temperature range processing and operating -20 to +70 C Temperature range storage -30 to +70 C Minimum bending/setting radius 5*D/10*D Maximum pulling tension 25 N Halogen free according to IEC 60754-1 Non dense smoke according to IEC 61034-1 and 61034-2 Non corrosive gas according to IEC 60754-2 Flame Retardant according to IEC 60332-1 Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET code concept version 1 date 2004-04-20 4200UE NON-PAIRED page 2/2 MARKING NEW GENERATION(R) BY BELDEN 4200UE HALOGEN FREE 70C 2C16 + sequential meter marking. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner