4506FE.00100 Belden

TECHNICAL DATA SHEET code 4506FE concept version 2 date 2005-11-02 4506FE NON-PAIRED page 1/2 APPLICATION Intercom/PA Systems, Sound/Audio Systems. CONSTRUCTION 1. Conductor Diameter of conductor 0.75mm (AWG22) Material stranded bare copper (7xAWG30) 2. Insulation Material PE Diameter over insulation 1.25 0.05 mm Wallthickness 0.25 mm 3. Overall Cabling Colour code black-red-white-green-brown-blue- orange-yellow 4. Outer shield Shield Beldfoil) Shield Material Aluminium / Polyester tape Shield Thickness Alu 9 m Shield coverage 100% Drainwire AWG24 (7xAWG32) tinned Cu 4. Sheath Material FRNC Colour Grey Nominal thickness of sheath 0.38 mm Diameter over sheath 5.0 0.30 mm REQUIREMENTS AND TEST METHODS Electrical: Nominal resistance conductor 54 /km Nominal resistance shield 46 /km Nom. capacitance conductor to conductor 1kHz 105 pF/m Nom. capacitance cond. to shield + other cond. 1kHz 185 pF/m Testvoltage conductor-conductor 2500 VDC, 3 seconds Testvoltage conductor-screen 2500 VDC, 3 seconds Voltage rating 300 V RMS Maximum continues current per conductor 25 C 2.0 A per conductor 25 C Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET code 4506FE concept version 2 date 2005-11-02 4506FE NON-PAIRED page 2/2 Mechanical and physical: Flame resistance u.c. Temperature range processing and operating -20 to +70 C Temperature range storage -30 to +70 C Minimum bending/setting radius 5*D/10*D Maximum pulling tension 35 N MARKING NEW GENERATION(R) BY BELDEN 4506FE HALOGEN FREE 70C 8C22 SHIELDED + sequential meter marking. Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003) this is valid for all material produced after the RoHS compliant date for this product. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner