DATE DATE DRAWN PROD MGR SIZE SCALE DWG NO. REVISIONS Product Bulletin This EDOCS.TI file is DJ 5-26-2001 SM TA01876 1:1 A 2 See Engr. Rlse. No. DATE DATE PROD. ENGR TECH LIAISON for viewing / quoting DESCRIPTION ERN2007609 TW DS purpose only. Wire Connectors (KM400184) UL: Listed Not Listed DATE LEGAL (3 signatures required) Do not use this.TI CSA: Certified Not Certified for Solid Copper Pair-22 through 26 GA. DRAWN DATE Proprietary Info. PB 404 image for use in Other Cat. Nos. 709SC and 709SD Daniel Jaehn 2/9/2007 production printing. Safety RETAIL MARKETING MGR. DATE DATE PROD. ENGR. Thomas & Betts Corporation 709 Connectors Contact Technical Warranty Memphis, Tennessee DATE Documentation SEE ISO DOCUMENT No. 0441:09:29 PROD. MGR. Pair-At-A-Time Splicing PROJ NO (ER NO) Other (if necessary) FOR REQUIRED SIGNATURES ON Department, in Memphis, KA400013 (107929) RELEASED DOCUMENTS A single 709 Quick Snap DATE for original ADOBE LEGAL (3 signatures required) CONFIDENTIAL AND PROPRIETARY INFORMATION OF THOMAS & BETTS THAT MAY NOT BE REPRODUCED, DISCLOSED OR Proprietary Info. USED FOR ANY PURPOSE EXCEPT UNDER THE AUTHORIZED WRITTEN CONSENT OF THOMAS & BETTS AND MAY BE Connector provides cost-saving ILLUSTRATOR (version RECALLED AT ANY TIME. COPYRIGHT (2007) THOMAS & BETTS CORPORATION. ALL RIGHTS RESERVED TELECOMMUNICATIONS Safety CS2) electronic file. pair-at-a-time splicing. The single Warranty pair connector design reduces 709 Connectors NOTES: 3.66 the number of connectors and Other (if necessary) Pair-at-a time splicing 1. ALL COPY TO BE PRINTED BLACK. the size of the splice bundle, thus DATE TECH LIAISON A single 709 Quick Snap Connector Provides Cost Effective saving time, sleeve material and 2. STUFFER SIZE TO BE 3.66 x 4.25 UL: Listed Not Listed Pair-at-a-time Splicing. The single pair connector design 709SC 709SD 709CD encapsulant. 709SC3. MATERIAL: 20 LB BOND (WHITE) CSA: Certified Not Certified reduces the number of connectors and the size of the splice Other 4. DASHED LINES INDICATED TRIM LINES. bundle thus saving time, sleeve material and encapsulant. RETAIL MARKETING MGR. DATE DO NONote: Connectors shown above arT PRINT DASHED LINES.e for reference only. INSTALLATION 5. TO BE PRINTED ON 8-1/2 X 11 SHEET Accommodates 22-26 gauge copper conductors Dielectric Strength Contact Resistance Both conductors are placed into one end of the 709 Quick 4.25 TRIM AS SHOWN. Pair-per-connector design produces smaller, Snap Connector, which is then pressed together using any Withstands the following: 60 Hz AC voltages Using a maximum criterion of two milliohms per neater splice bundles available pliers. The other half of the pair being spliced is for at least one minute. connection, there will be no more than one failure Available with a filled, moisture-resistant placed in the other end of the 709 Connectorper 1, which is then0,000 connections over the life of the installation. compound that provides protection from the pressed closed to complete the splice. AC-KV elements in the outside plant environment Connector Type 709SD Pull Strength DESIGN FEATURES Unfilled version provides flame-retardant Connected wire withstands the following axially Accommodates 22-26 gauge copper conductors in straight protection for buildings and cable entrance Pair to Tip to applied force: splice and half-tap configurations applications NOTE 4 Pair Ring Extended locking latches help improve Internal Handling Reference: Pair-per-connector design produces smaller, neater Filled 3.0 3.0 1. THIS DOCUMENT NUMBER FOLLOWED BY A -TB1 IN EDOCS IS A % Breaking the locking range of the connector splice bundles Wire Gauge THOMAS & BETTS CONFIDENTIAL FILE ONLY. Strength Increased chamfer size improves Unfilled 1.5 1.5 Available with a filled, moisture resistant compound that 2. THIS DOCUMENT NUMBER FOLLOWED BY A -TB2 IN EDOCS IS FOR the seating of the contacts and prevents provides protection from the elements in the Outside Plant 26 80 PUBLIC INFORMA709CD TION AND PRINTING NEEDS. movement within the connector Temperature environment 24 70 Minimum installation effort required DWG NO. & PRINT Withstands 1VERSION 024 cycles from -40 C (-40 F) Unfilled version provides flame retardant protection for USDA Rural Development Listed to 60 C (140 F). Cycle is 2 hours with hour 22 50 DO NOT PACK THIS SHEET WITH PRODUCT TA01876 (Print version) buildings and cable entrance applications UL Listed dwells at extreme temperatures. Reliability of the connection can be verified visually or tested Insulation Resistance with 6A test clips Insulation Diameter Installation Greater than 20 x 109 ohms at 250 V DC. Will accommodate wire sizes up to .054 Minimum installation effort requi ed Splicing: CLOSED CLOSED CLOSED (1.37mm) in diameter. This includes 22 gauge 709SC Gel Specifications Include OPEN OPEN OPEN REA/RUS Approved 1. DO NOT remove wire insulation. the Following HDPE. WIRE CONNECTORS 2. WIRE CONNECT Raise end covers and fully insert pair ORS WIRE CONNECTORS FOR SOLID COPPER PAIR FOR SOLID COPPER PAIR FOR SOLID COPPER PAIR Shelf Life: 2 years 32.2 C (90 F) 22 Through 26 GA. approximately 22 Through 26 GA.. 22 Through 26 GA. Humidity Cat Nos. 709SC & 709SD Cat Nos. 709SC & 709SD OCat Nos.RDERING 709SC & 709SDINFORMATION Dielectric Resistance: 1 KVA 5mm WARNING 3. Press connector covers closed with parallel WARNING WARNING Withstands 300 cycles from 4 C (40 F) to Boiling Point: 310 C (590 F) Do not terminate on LIVE circuits. Do not terminate on LIVE circuits. Do not terminate on LIVE circuits. Connector is for use on telephone circuits operating Connector is for use on telephone circuits operating Connector is for use on telephone circuits operating jaw pliers until both latches are secure 60 C (140 F) at 95% relative humidity. Cycle CATALOG QTY PER at 100 mA or less and a maximum 56.5 Vdc. at 100 mA or less and a maximum 56.5 Vdc. at 100 mA or less and a maximum 56.5 Vdc. Melting Point: 95 C (203 F) Ringing voltage not to exceed 150V rms. Ringing voltage not to exceed 150V rms. Ringing voltage not to exceed 150V rms. is 12 hours with about a 5 hour dwell at Splicing: Splicing: (Fig. 1). Do not use excessive force. Splicing: NUMBER DESCRIPTION CARTON ORDER BY Freezing Point: -30 C (-22 F) 1. DO NOT remove wire insulation. 1. DO NOT remove wire insulation. extreme temperatures.1. DO NOT remove wire insulation. 2. Raise end covers and fully insert pair 2. Raise end covers and fully insert pair 2. Raise end covers and fully insert pair Specific Gravity: 0.94 approximately 1/2. approximately 1/2. approximately 1/2.709SC Filled 709 200 Carton 3. Press connector covers closed with parallel jaw 3. Press connector covers closed with parallel jaw 3. Press connector covers closed with parallel jaw Connector (Blue) pliers until both latches are secure (Fig. 1). pliers until both latches are secure (Fig. 1). pliers until both latches are secure (Fig. 1). PLIERS PLIERS PLIERS - DO NOT USE EXCESSIVE FORCE - - DO NOT USE EXCESSIVE FORCE - - DO NOT USE EXCESSIVE FORCE - Fig. 1 Fig. 1 Fig. 1 709SD Dry, Flame 200 Carton Checking The Connector: Checking The Connector: Checking The Connector: Part Qty Per Order Retardant 1. Visually inspect the connector to ensure that conductors are fully seated to the 1. Visually inspect the connector to ensure that conductors are fully seated to the 1. Visually inspect the connector to ensure that conductors are fully seated to the Description bottom of the connector before closing the connector covers. bottom of the connector before closing the connector covers. Numberbottom of the connector before closing the connector co709 Connector (Yvers. ellow) Carton By 2. Next, visually inspect that connector covers are latched to the body of 2. Next, visually inspect that connector covers are latched to the body of 2. Next, visually inspect that connector covers are latched to the body of the connector and pull lightly on the wire to ensure they are held tightly the connector and pull lightly on the wire to ensure they are held tightly the connector and pull lightly on the wire to ensure they are held tightly in place. in place. in place709CD . Half-tap Adapter 400 Carton 709SC Filled 709 Connector (Pink) 200 Carton For more information on this or any other Thomas & Betts products, For more information on this or any other Thomas & Betts products, For more information on this or anfor 709 Connector y other Thomas & Betts products, see your local account executive or call toll free 1-800-685-9452. see your local account executive or call toll free 1-800-685-9452. see your local account executive or call toll free 1-800-685-9452. 709SD Dry, Flame-Retardant 709 Connector (Yellow) 200 Carton Limited Warranty Applies. Limited Warranty Applies. Limited Warranty Applies. Thomas & Betts Corporation Thomas & Betts Corporation Thomas & Betts Corporation Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee www.tnb.com www.tnb.com 709CD Half-Tap Adapter for 709 Connector (White)www.tnb.com 400 Carton for full warranty terms. for full warranty terms. for full warranty terms. 2009 Thomas & Betts. All Rights Reserved. 2009 Thomas & Betts. All Rights Reserved. 2009 Thomas & Betts. All Rights Reserved. TA01876 C TA01876 C TA01876 C Belden Technical Support 1.800.BELDEN.1 www.belden.com PB 404 CLOSED CLOSED CLOSED OPEN OPEN OPEN Copyright 2011, Belden Inc. WIRE CONNECTORS WIRE CONNECTORS WIRE CONNECTORS FOR SOLID COPPER PAIR FOR SOLID COPPER PAIR FOR SOLID COPPER PAIR 22 Through 26 GA. 22 Through 26 GA. 22 Through 26 GA. Cat Nos. 709SC & 709SD Cat Nos. 709SC & 709SD Cat Nos. 709SC & 709SD WARNING WARNING WARNING Do not terminate on LIVE circuits. Do not terminate on LIVE circuits. Do not terminate on LIVE circuits. Connector is for use on telephone circuits operating Connector is for use on telephone circuits operating Connector is for use on telephone circuits operating at 100 mA or less and a maximum 56.5 Vdc. at 100 mA or less and a maximum 56.5 Vdc. at 100 mA or less and a maximum 56.5 Vdc. Ringing voltage not to exceed 150V rms. Ringing voltage not to exceed 150V rms. Ringing voltage not to exceed 150V rms. Splicing: Splicing: Splicing: 1. DO NOT remove wire insulation. 1. DO NOT remove wire insulation. 1. DO NOT remove wire insulation. 2. Raise end covers and fully insert pair 2. Raise end covers and fully insert pair 2. Raise end covers and fully insert pair approximately 1/2. approximately 1/2. approximately 1/2. 3. Press connector covers closed with parallel jaw 3. Press connector covers closed with parallel jaw 3. Press connector covers closed with parallel jaw pliers until both latches are secure (Fig. 1). pliers until both latches are secure (Fig. 1). pliers until both latches are secure (Fig. 1). PLIERS PLIERS PLIERS - DO NOT USE EXCESSIVE FORCE - - DO NOT USE EXCESSIVE FORCE - - DO NOT USE EXCESSIVE FORCE - Fig. 1 Fig. 1 Fig. 1 Checking The Connector: Checking The Connector: Checking The Connector: 1. Visually inspect the connector to ensure that conductors are fully seated to the 1. Visually inspect the connector to ensure that conductors are fully seated to the 1. Visually inspect the connector to ensure that conductors are fully seated to the bottom of the connector before closing the connector covers. bottom of the connector before closing the connector covers. bottom of the connector before closing the connector covers. 2. Next, visually inspect that connector covers are latched to the body of 2. Next, visually inspect that connector covers are latched to the body of 2. Next, visually inspect that connector covers are latched to the body of the connector and pull lightly on the wire to ensure they are held tightly the connector and pull lightly on the wire to ensure they are held tightly the connector and pull lightly on the wire to ensure they are held tightly in place. in place. in place. For more information on this or any other Thomas & Betts products, For more information on this or any other Thomas & Betts products, For more information on this or any other Thomas & Betts products, see your local account executive or call toll free 1-800-685-9452. see your local account executive or call toll free 1-800-685-9452. see your local account executive or call toll free 1-800-685-9452. Limited Warranty Applies. Limited Warranty Applies. Limited Warranty Applies. Thomas & Betts Corporation Thomas & Betts Corporation Thomas & Betts Corporation Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee Refer to: www.tnb.com/ecpwarranty Memphis, Tennessee www.tnb.com www.tnb.com www.tnb.com for full warranty terms. for full warranty terms. for full warranty terms. 2009 Thomas & Betts. All Rights Reserved. 2009 Thomas & Betts. All Rights Reserved. 2009 Thomas & Betts. All Rights Reserved. TA01876 C TA01876 C TA01876 CX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Terminals category: Click to view products by Belden manufacturer: Other Similar products are found below : 00-054007-01074-6 00-054007-70206-1 00-054007-70210-8 00-054007-70217-7 00-054007-70226-9 00-054007-70228-3 00-054007-70248- 1 00-054007-70256-6 00-054007-70301-3 00-054007-70316-7 00-054007-49560-4 00-054007-70209-2 00-054007-70225-2 00-054007- 70227-6 00-054007-70231-3 00-054007-70241-2 00-054007-70242-9 00-054007-70244-3 00-054007-70246-7 00-054007-70263-4 00- 054007-70288-7 00-054007-70290-0 00-054007-70300-6 00-054007-70304-4 01-2065-1-0216 01-2900-1-04412 00581P0075 600TS-10 60205-1 604200-1 605601-1 60598-1-CUT-TAPE 61314-6-C 61810-3 61-S 61-SN 626-0194 62-NBM-A 62-SN 62-SP 63-S 640179-1 M55155/059I03 M55155/079C01 M55155/099H02 M55155/109H01 M55155/109H02 M55155/12XH05 M55155/16XH02 M55155/29-5S