9182NH.00305 Belden

TECHNICAL DATA SHEET code 9182NH version 5 date 2007-02-15 page 9182NH 1/2 APPLICATION Twinaxial instrumentation and computer cable for data transmission applications. CONSTRUCTION 1 2 3 7 4 5 6 1. Conductor AWG22 (19xAWG34) tinned Cu 2. Insulation Material Foamed high density Polyethylene Diameter over insulation 3.45 0.10 mm Colour of insulation Black and yellow 3. Filler (2x) Material Foamed fibrillated Polypropylene Diameter 2.92 mm Colour White 4. Foil (Duofoil) Material Aluminium/Polyester/Aluminium Thickness 9 / 23 / 9 m 5. Drainwire AWG22 (19xAWG34) tinned Cu 6. Foil Material Polyester Thickness 23 m 7. Sheath Material FRNC (UV stabilised) Colour Black Nominal thickness 0.89 mm Nominal diameter 8.80 mm REQUIREMENTS AND TEST METHODS Electrical: Nominal resistance conductor 20 C 45.9 /km Nominal resistance shield 20 C 20.7 /km Nominal capacitance conductor to conductor 28.9 pF/m Nominal capacitance conductor to shield 54.1 pF/m Nominal impedance 150 Nominal velocity of propagation 78 % Nominal delay 4.3 ns/m Nominal inductance 0.96 H/m Nominal attenuation 1 MHz 1.31 dB/100m Nominal attenuation 5 MHz 2.79 dB/100m Nominal attenuation 10 MHz 3.94 dB/100m Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET code 9182NH version 5 date 2007-02-15 page 9182NH 2/2 Nominal attenuation 20 MHz 5.58 dB/100m Nominal attenuation 50 MHz 8.86 dB/100m Nominal attenuation 100 MHz 14.11 dB/100m Nominal attenuation 200 MHz 20.34 dB/100m Nominal attenuation 400 MHz 28.87 dB/100m Testvoltage conductor-conductor 2500 VDC, 3 seconds Testvoltage conductor-screen 2500 VDC, 3 seconds Voltage rating 300 V RMS Mechanical and physical: Flame resistance IEC 60332-3C Oil resistance ASTMD741 Radiation resistance IEC544 (CERN) Application specification BS 7655 section 6.1 table 1, LTS 3 Halogen content according to IEC754-1 zero Corrosivity of fire gasses according to IEC754-2 Conductivity 100 S/cm pH value 3.5 Temperature range installing -15 to +80 C Temperature range operating (moving installation) -15 to +80 C Temperature range operating (fixed installation) -45 to +80 C Temperature range storage -45 to +80 C Minimum bending radius 10 x cable diameter PACKAGING On non-returnable reels (E 500) with a nominal length of 305m (-0, +10%) or on non- returnable reels (E 560) with a nominal length of 500m (-0, +10%) or on non-returnable reels (E 600) with a nominal length of 1000m (-0, +10%). Each reel is labelled with the following data: Belden Logo. Belden code number. Item description. Length on the reel. Date of manufacture. CE-marking. Belden CDT believes this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003) this is valid for all material produced after the RoHS compliant date for this product. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner