Product: 9913 50 Ohm Wireless Transmission Coax, RG-8, 10 AWG Solid BC, Foil + 90% TC Braid, PVC Jkt Product Description 50 Ohm Wireless Transmission Coax, RG-8, 10 AWG Solid Bare Copper Conductor , PE Insulation, Foil + 90% Tinned Copper Braid Shield, PVC Jacket Technical Specifications Product Overview Point-to-point and point-to-multipoint wireless antenna communication Wireless microphones, Two-Way Radios, Amateur (Ham) Radio, Low Power FM, GPS, RFID (Radio Suitable Applications: Frequency Identification) Construction Details RG Type: 8 Conductor AWG Stranding Nom. Diameter Material 10 Solid 0.108 in BC - Bare Copper Insulation Material Nom. Diameter Notes PE - Polyethylene (Semi-Solid) 0.285 in Solid PE monofilament spiral around conductor. Solid PE tube over monofilament Outer Shield Material Layer Outer Shield Type Material Coverage 1 Tape Tri-Laminate (Alum+Poly+Alum) 90% 2 Braid Tinned Copper (TC) 90% Outer Jacket Material Material Nom. Diameter PVC - Polyvinyl Chloride 0.405 in Electrical Characteristics Attenuation Frequency Nom. Attenuation dB/100ft 5 MHz 0.4 dB/100ft 10 MHz 0.5 dB/100ft 50 MHz 1.0 dB/100ft 100 MHz 1.4 dB/100ft 200 MHz 1.8 dB/100ft 400 MHz 2.6 dB/100ft 700 MHz 3.6 dB/100ft 900 MHz 4.1 dB/100ft 1000 MHz 4.4 dB/100ft Power Rating Frequency MHz Max. Power Rating W 5 MHz 4,021 W 10 MHz 3,217 W50 MHz 1,609 W 100 MHz 1,149 W 200 MHz 894 W 400 MHz 619 W 700 MHz 447 W 900 MHz 393 W 1,000 MHz 366 W Electricals Nom. Conductor DCR Nom. Outer Shield DCR Nom. Capacitance Cond-to-Shield Nom. Impedence 0.9 Ohm/1000ft 1.8 Ohm/1000ft 24.6 pF/ft 50 Ohm Voltage Non-UL Voltage Rating 300 V Mechanical Characteristics Temperature Operating -30C to +75C Bend Radius Installation Min. 4.0 in Bulk Cable Weight: 89 lbs/1000ft Max. Pull Tension: 184 lbs Standards and Compliance Environmental Suitability: Indoor (Not Riser or Plenum), Indoor Sustainability: CA Prop 65 European Directive EU CE Mark, EU Directive 2015/863/EU, EU Directive 2011/65/EU (ROHS II), EU Directive 2012/19/EU (WEEE) Compliance: APAC Compliance: China RoHS II (GB/T 26572-2011) Plenum Number: 89913 Product Notes Notes: Recommend use of 7810R, 7810A, 9913F7, or 9914 for applications above 1 GHz. History Update and Revision: Revision Number: 0.330 Revision Date: 08-25-2020 2020 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on anASI basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden s standard terms and conditions of sale. Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden s knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.