H126A00 Belden

TECHNICAL DATA SHEET Code H 126A00 version 6 date 2008-09-17 page COAX RG6CU AL PVC 1/2 APPLICATION Coaxial cables used in cabled distribution networks designed according the European Standard EN 50117 operating at frequencies between 5 MHz and 3000 MHz and the International Standard IEC 1196. CONSTRUCTION 1 2 3.1 3.2 4 1 Inner conductor Solid soft annealed copper 2 Dielectric Gas injected PE 3.1 Foil AL-PET-AL 3.2 Braid Annealed tinned copper 4 Sheath PVC according the European Standard HD 624. REQUIREMENTS AND TEST METHODS Test methods in accordance with European standard EN 50117-1. Mechanical characteristics 1. Inner conductor. Diameter: 1.00 mm 0.03 mm 2. Dielectric: Diameter: 4.57 mm 0.15 mm Adhesion: No shrinkback 3. Outer conductor: Diameter screen: 5.25 mm Foil overlap: 1 mm Coverage braid: 35 % 5 % 4. Sheath: Diameter: 6.9 mm 0.2 mm 2 Tensile strength: 12.5 N/mm Elongation at break: 150 % 5. Cable: Crush resistance of cable: < 1% (load of 700N) Storage/operating temperature: -40C to +70C Minimum installation temperature: -5 C Minimum static bend radius: 35 mm Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET Code H 126A00 version 6 date 2008-09-17 page COAX RG6CU AL PVC 2/2 Electrical characteristics Mean characteristic impedance: 75 3 Regularity of impedance: > 40 dB DC loop resistance: 49 /km DC resistance inner conductor: 23 /km DC resistance outer conductor: 26 /km Capacitance: 54 pF/m 2 pF/m Velocity ratio: 0.82 0.02 4 Insulation resistance: > 10 M.km Voltage test of dielectric: 2 kVdc Screening efficiency 100-1000 MHz: 75 dB Transfer impedance: 40 m/m Screening class: C Return loss at 5-30 MHz: 20 dB* 30-470 MHz: 20 dB* 470-1000 MHz: 18 dB* 1000-2000 MHz: 16 dB* 2000-3000 MHz: 15 dB* *Max. 3 peak values 4 dB lower than specified. Attenuation at Nominal Attenuation at Nominal 5 MHz: 1.8 dB/100m 800 MHz: 18.7 dB/100m 50 MHz: 4.7 dB/100m 1000 MHz: 21.1 dB/100m 100 MHz: 6.5 dB/100m 1350 MHz: 24.9 dB/100m 200 MHz: 9.8 dB/100m 1750 MHz: 28.8 dB/100m 400 MHz: 13.0 dB/100m 2150 MHz: 32.3 dB/100m 600 MHz: 16.2 dB/100m 2400 MHz: 34.4 dB/100m Maximum attenuation is 10 % higher. REVISIONS Description Date Initials 6 Added Transfer impedance and screening class, changed 2008-09-17 PBo screening efficiency to 75dB, changed temperature to -40C Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner