Type 0680L Square Ceramic Surface Mount Slow Blow Fuse 0680L Series 2410 Size RoHS Compliant Features - Slow Blow, 2410 SMD - Compatible with 260, IR Pb-free solder process - Wide range of current rating from 375mA to 12A - Wide operating temperature range, -55 to 125 - Tape & Reel for auto-insert SMD process - AEC-Q Compliant - RoHS compliant with exemption 7(a) Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free, (MSL = 1) - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications - Notebook -Storage system - LCD monitor -Telecom system - PC computer -Wireless basestation - Office electronic equipment -White goods - Industrial equipment -Game console - Medical equipment -Battery charging circuit protection - POE, POE+ - LCD / LED monitor - Power supply AEC-Q Compliant - LCD / LED TV HALOGEN FREE = Electrical Characteristics Safety Agency Approvals (UL/CSA/STD.248-14) Safety Safety Voltage Rating Ampere Range / Volt Agency Blow Time Agency (V) I.R. ability* Testing Certificate Current Minimum Maximum 375mA-7A/125V AC 50A 375mA-7A/125V AC 100% 4 Hrs. N/A 125V DC 100A 125V DC 75V DC 500A E506667 200% N/A 120 Sec >7A-12A/50V AC >7A-12A/50V AC 100A 300% 0.15 Sec 3 Sec 75V DC 500A 75V DC 800% 0.01 Sec 0.1 Sec 375mA-7A/125V AC 50A 50268578 375mA-7A/125V AC 125V DC 100A EN 60127-1: 125V DC 2006+A1+A2 75V DC 500A >7A-12A/50V AC EN 60127-4: >7A-12A/50V AC 100A 2005+A1+A2 75V DC 75V DC 500A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Materials Terminations : Silver Plated Caps /Gold Plated Caps/Palladium Plated Caps On Fuse : Current Rating, T, Llaser marked on ceramic tube, bel stamped in end caps. On Label : Marking be,0680, Current Ratin, Voltage Ratin, Interrupting Ratin, Appropriate Safety Logo and , (China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection 2 / 4 Type 0680L Environmental Specifications High temperature storage MIL-STD-202 Method 108 MIL-STD-202G Method 213,Test condition A Shock Resistance (50Gs peak for 11 milliseconds : Half-sine Temperature cycling JESD22 Method JA-104,Test Condition B waveform ) MIL-STD-202 Method 103, 85C/85% RH MIL-STD-202G, Method 201A Biased humidity Vibration Resistance with 10% operating power for 1000 hrs. (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202 Method 108, Test Condition Operational life MIL-STD-202G, Method 101E, Test Condition Salt Spray Resistance D B (48 hrs.). Resistance to solvents MIL-STD-202 Method 215 MIL-STD-202G, Method 302, Test Condition A Insulation Resistance Mechanical shock MIL-STD-202 Method 213,Test Condition C (After Opening) 10,000 ohms minimum. MIL-STD-202G Method 204 Test condition MIL-STD-202G, Method 107G, Test Condition Vibration Thermal Shock D 10-2k HZ ,20Gs for 20minutes B (-65 to +125 ). Resistance to soldering MIL-STD-202 Method 210,Test condition B Operating Temperature -55 to +125 heat Thermal shock MIL-STD-202 Method 107 Moisture Sensitivity Level 1 (According to IPC J-Std-020) Solderability J-STD-002 Test B Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 Temperature Electrical Electrical Specifications Agency Volt-drop Melting Melting Maximum Typical Cold Voltage and Ampere Approvals 100% In IT IT Power Part Number Resistance Interrupting Rating (Volt) 10 In <10ms Dissipation (ohms) Ratings max. (A Sec) (A Sec) (W) 0680L0375-XX 375mA 0.93 1.20 0.14 0.10 0.45 Y Y 0680L0500-XX 500mA 0.58 0.90 0.27 0.35 0.45 Y Y 0680L0630-XX 630mA 0.41 0.80 0.43 0.42 0.50 Y Y 0680L0750-XX 750mA 0.33 0.75 0.62 0.61 0.56 Y Y 0680L1000-XX 1A 0.175 0.60 1.5 1.3 0.60 Y Y 0680L1500-XX 1.5A 0.095 0.40 3.3 3.2 0.60 Y Y 0680L2000-XX 2A 0.068 0.35 6 5 0.70 Y Y See Table of 0680L2500-XX 2.5A 0.048 0.34 Safety Approvals 9 7 0.85 Y Y on Page 1 for 0680L3000-XX 3A 0.037 0.27 13 12 0.81 Y Y Voltage and 0680L3500-XX 3.5A 0.030 0.26 18 17 0.91 Y Y associated Interrupting Ratings 0680L4000-XX 4A 0.026 0.25 24 22 1.00 Y Y 0680L5000-XX 5A 0.019 0.23 37 36 1.15 Y Y 0680L6300-XX 6.3A 0.015 0.22 43 50 1.39 Y Y 0680L7000-XX 7A 0.012 0.21 68 77 1.47 Y Y 0680L8000-XX 8A 0.0099 0.20 108 105 1.60 Y Y 0680L9100-XX 10A 0.0084 0.19 170 150 1.90 Y Y 0680L9120-XX 12A 0.0063 0.18 244 180 2.16 Y Y Consult manufacturer for other ratings XX - Packaging code (see ordering information) NOTES 1: All tests were conducted with the fuses soldered to a printed circuit boards with a nominal thickness of 1.6 mm. The copper test circuit trace was a printed circuit with an overall length of 100 mm, copper thickness/width as described below. The printed circuit boards were mounted by screws to a test fixture having brass blocks for connection of the test leads. All samples were soldered to the test boards by the manufacturer. Fuse rating Test Board Trace Dimensions 375mA-5A 1 oz. copper, 5mm wide. 6A-12A 3 oz. copper, 10mm wide. NOTES 2: Conventional (Ambient Pressure) Reflow Process is recommended for this device. The sale and use of product is subject to bel terms and condition of saleunless otherwise agreed .User should independently evaluate the suitability of and test each product selected for their own application. product are not designed for and may not be used in all applications. Specifications subject to change without notice Bel Fuse Inc. +1 201.432.0463 206 Van Vorst Street Bel.US.CS belf.com Jersey City, NJ 07302 USA belfuse.com/circuit-protection 2020 Bel Fuse, Inc. Rev. 0680L Jul2020
