0RCY-F0S10BG Bel Fuse

0RCY-F0S10x Isolated DC-DC Convert The 0RCY-F0S10x is an isolated DC/DC converter that operate from a nominal 50 V/54 V source. This converter is intended to provide isolation and step down to generate a regulated intermediate bus for the purpose of powering non-isolated Point-of-Load (POL) converters. This unit will provide up to 500 W of output power from a nominal 50 V/54 V input. The output of the converter has the droop function which allow the modules operating in parallel with high output current sharing precision. This converter is provided in an 1/8 brick package. Key Features & Benefits 45-56 VDC Input / 10.2 VDC 49 A Output Output /1/8th Brick Converter Isolated Fixed Frequency (300 kHz) High Efficiency High Power Density Input Under Voltage Lockout OCP/SCP Output Over-voltage Protection Over Temperature Protection Remote On/Off Parallel Operation Low Cost Approved to UL/CSA 60950-1, 2nd +A2 version(pending) Class 2, Category 2, Isolated DC/DC Converter (refer to IPC-9592B) Applications Networking Computers and peripherals Telecommunications belpowersolutions.com 2 0RCY-F0S10x 1. MODEL SELECTION MODEL OUTPUT INPUT MAX. OUTPUT MAX. OUTPUT TYPICAL EFFICIENCY NUMBER VOLTAGE VOLTAGE CURRENT POWER 0RCY-F0S10L 10.2 VDC 45 VDC 56 VDC 49 A 500 W 97% 0RCY-F0S10B 10.2 VDC 45 VDC 56 VDC 49 A 500 W 97% 0RCY-F0S10D 10.2 VDC 45 VDC 56 VDC 49 A 500 W 97% NOTE: Add G suffix at the end of the model number to indicate Tray Packaging. PART NUMBER EXPLANATION 0 R CY - F0 S 10 x y RoHS Series Output Input Output Mounting Type Active Logic Package Type Status Name Power Range Voltage L active low, with HSK B active low , with Through hole mount RoHS 1/8th Brick 500 W 45 56V 10.2 V G Tray package HSK plate D active low, with HSK with Fins 2. ABSOLUTE MAXIMUM RATINGS PARAMETER DESCRIPTION MIN TYP MAX UNITS Continuous non-operating Input Voltage -0.3 - 60 V Remote On/Off -0.3 - 16 V Ambient temperature, Long-Term The components on the Unit meet IPC-9592 -5 - 85 C Operating derating guidelines The component temperatures might exceed Ambient temperature, Short-Term IPC-9592 derating guidelines but not exceed -20 - 90 C Operating (96 hours/year) component temperature ratings Altitude - - 4000 m Storage Temperature -40 - 100 C NOTE: Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may permanently damage the device. tech.support psbel.com belpowersolutions.com