50 Ohm SMB
Right Angle Crimp Type Plug -
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Captivated Contact
CABLE TYPE GOLD PLATED NICKEL PLATED
RG-316DS, 188 DS,
131-3404-101 131-3404-116
179 DS, 187 DS
1. Identify connector parts. (4 piece parts: crimp sleeve, body
assembly, expansion cap and covering ring. Die cast body
only.)
2. Strip cable to dimensions shown. Do not nick braid or center
conductor. A wire stripper of correct size is recommended for
this step. Twist stranded center conductor into tight bundle and
tin (optional). Slide crimp sleeve onto cable as shown.
3. Flare braid and slide cable into body assembly making certain
that the cable insulation bottoms on center contact. Solder cen-
CABLE PART CRIMP
ter conductor to contact through the rear and side access ports.
GROUP NUMBER A B HEX
Use a minimum amount of solder for a good joint. .020 (0.51)
RG-179DS, 187DS,
diameter solder is recommended.
188DS, 316DS 131-3404-101/116 .177 (4.50) .289 (7.34) .151 (3.83)
4. Arrange braid uniformly around crimp stem of body assembly.
Slide crimp sleeve over braid and crimp securely using recom-
mended crimp tool. Place expansion cap in access port and
seat with a .125 (3.17) diameter flat punch. Snap cover ring
over side access port.
CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns
299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om SMB - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7
Impedance: 50 ohms MHz)
Frequency Range: Connectors ...................................................... 0-4 GHz Connectors for RG-178 ......................................................................... 500
Dummy loads .................................................. 0-1 GHz Connectors for RG-316, RG-58 ............................................................. 700
VSWR: (f = GHz) Straight Right Angle Uncabled receptacles and adapters ...................................................... 600
Cabled Cabled
Dummy loads ........................................................................................ N/A
o
RG-178 cable .................................................... 1.30 + .04f 1.45 + .06f Power Rating (Dummy Load): 0.5 watt @ +25 C, derated to 0.25 watt @
o
RG-316, RG-58, and .086 semi-rigid cable ....... 1.25 + .04f 1.35 + .04f +125 C
Adapters ............................................................ 1.20 + .04f MECHANICAL RATINGS
Uncabled receptacles, dummy loads ........................................................ N/A Engagement Design: MIL-C-39012, Series SMB
Working Voltage: (Vrms maximum) Engagement/Disengagment Force: 2 pounds min to 14 pounds
Connectors for Cable Type Sea Level 70K Feet
maximum axial force
RG-178 ....................................................... 250 60 Contact Retention: 4 lbs. min axial force (captivated contacts)
RG-316, RG-58, .086 semi-rigid 1 inch-ounce min torque (uncabled receptacles)
uncabled receptacles, adapters ................ 335 85 Cable Retention: Axial Force* (pounds) Torque (in-oz)
Dummy loads ....................................................................................N/A Connectors for RG-178 ............................... 10 N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level) Connectors for RG-316 ............................... 20 N/A
Connectors for RG-178 ......................................................................... 750 Connectors for RG-58 ................................. 40 16
Connectors for RG-316, RG-58, .086 semi-rigid, Connectors for .086 semi-rigid .................... 30 16
uncabled receptacles, adapters ......................................................... 1000 * or cable breaking strength whichever is less.
Dummy loads ....................................................................................N/A Durability: 500 cycles minimum
Corona Level: (Volts minimum at 70,000 feet) ENVIRONMENTAL RATINGS
Connectors for RG-178 ......................................................................... 185
(Meets or exceed the applicable paragraph of MIL-C-39012)
o o
Connectors for RG-316, RG-58, .086 semi-rigid ................................... 250 Temperature Range: Connectors ....................................... - 65 C to + 165 C
o o
Uncabled receptacles, adapters, dummy loads .................................... N/A Dummy loads ................................... - 65 C to + 125 C
Insertion Loss: (dB maximum, tested at 1.5 GHz) Thermal Shock: MIL-STD-202, Method 107, Condition B (N/A dummy loads)
Straight cable connectors ............................................................... 0.30 dB Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Right angle cable connectors ......................................................... 0.60 dB Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Uncabled receptacles, adapters and dummy loads .............................. N/A Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Insulation Resistance: 1000 megohms minimum MATERIAL SPECIFICATIONS
Initial After Environmental
Contact Resistance: (milliohms maximum) Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** per MIL-
Center contact (straight cabled connectors G-45204 .00001 min or nickel plated per QQ-N-290
and uncabled receptacles) .................................. 6.0 8.0 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003"
Center contact (right angle cabled min.
connectors and adapters) .................................. 12.0 16.0 Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
Outer contact (gold plated connectors) ................... 1.0 1.5 .00003" min.
Outer contact (nickel plated connectors) ................ 2.5 3.5 Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 OR Teflon
Braid to body (gold plated connectors) ................... 1.0 N/A PFA 340
Braid to body (nickel plated connectors) ................. 2.5 N/A Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
RF Leakage: (dB minimum tested at 2.5 GHz) min. or nickel plated per QQ-N-290
Cable connectors .............................................................................. -55 dB Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
Uncabled receptacles, adapters and dummy loads ............................... N/A min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or nickel
Avoid user injury due to misapplication. See safety advisory definitions inside front cover.
plated per QQ-N-290
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
Cover Rings: Phosphor Bronze per QQ-B-750, gold plated per MIL-G-45204
.00001 min. or nickel plated per QQ-N-290.
MATING ENGAGEMENT FOR SMB
SERIES PER MIL-C-39012
Plug Jack
Notes
1. ID of contact to meet VSWR mating char-
acteristics and connector durability when
mated with a dia .019 /0.53 male contact.
2. Must meet the force to engage and disen-
gage when mated with mating part.
Plug
Jack
CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns
299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om