MCX Reverse Polarity End Launch INCHES (MILLIMETERS) Bulkhead Jack Receptacle - Round Contact CUSTOMER DRAWINGS AVAILABLE UPON REQUEST GOLD PLATED NICKEL PLATED BOARD THICKNESS 133-5701-801 133-5701-806 .062 (1.57) Mounting Hole Layout CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om MCX Reverse Polarity - 50 Ohm Specifications INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST ELECTRICAL RATINGS MECHANICAL RATINGS Impedance: 50 Ohms Engagement Force: 5.6 pounds maximum axial force Frequency Range: 0-6 GHz Disengagement Force: 8 pounds maximum axial force, 1.0 pound min. VSWR: (f = GHz) Straight Cabled Right Angle Contact Retention: 2.3 lbs. min. axial force (captivated contacts) Connectors Cabled Connectors 1 inch-ounce min. torque (uncabled receptacles) RG-178 cable ............................... 1.17 + .04f 1.07 + .06f Cable Retention: Axial Force* Torque RG-316 cable .............................. 1.13 + .04f 1.07 + .04f (pounds) (in-oz) Uncabled receptacles .................................................................... N/A Connectors for RG-178 ............................... 10 N/A Working Voltage: (Vrms maximum) Connectors for RG-316 ............................... 20 N/A Connectors for Cable Type Sea Level 70K Feet Connectors for RG-316DS .......................... 25 N/A RG-178 ................................................... 250 65 * or cable breaking strength whichever is less. RG-316 uncabled receptacles ................ 335 85 Dielectric Withstanding Voltage: (VRMS minimum at sea level) ENVIRONMENTAL RATINGS (Meets or exceed the applicable Connectors for RG-178 .............................................................. 750 paragraph of MIL-C-39012) Connectors for RG-316 uncabled receptacles ......................... 1000 Durability: 500 cycles minimum Corona Level: (Volts minimum at 70,000 feet) Temperature Range: - 65C to + 165C Connectors for RG-178 .............................................................. 190 Thermal Shock: MIL-STD-202, Method 107, Condition F Connectors for RG-316 uncabled receptacles ........................... 250 Corrosion: MIL-STD-202, Method 101, Condition B Insertion Loss: (dB maximum, tested at 1 GHz) Shock: MIL-STD-202, Method 213, Condition B Straight cable connectors ....................................................... 0.1 dB Vibration: MIL-STD-202, Method 204, Condition B Right angle cable connectors ................................................. 0.2 dB Moisture Resistance: MIL-STD-202, Method 106 Uncabled receptacles ................................................................. N/A Insulation Resistance: 10000 megohms minimum MATERIAL SPECIFICATIONS Contact Resistance: (milliohms maximum) After Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** Initial Environmental per MIL-G-45204 .00001 min or nickel plated per QQ-N-290 Center contact (straight cabled connectors, Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 uncabled receptacles) .......................................5.0 8.0 .00003 min. Center contact (right angle cabled connectors) ....5.0 15.0 Female - beryllium copper per QQ-C-530, gold plated per MIL-G- Outer contact ........................................................1.0 1.5 45204 .00003 min. Braid to body (gold plated connectors) .................1.0 N/A Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Braid to body (nickel plated connectors) ...............2.5 N/A Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 RF Leakage: (dB typical tested at 2.5 GHz) .00001 min. or nickel plated per QQ-N-290 Cable connectors .................................................................. -55 dB Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 Uncabled receptacles ................................................................. N/A .00001 min. or nickel plated per QQ-N-290 RF High Potential Withstanding Voltage: (Vrms minimum, tested at Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze 4 and 7 MHz) (lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001 min. Connectors for RG-178 .............................................................. 500 or nickel plated per QQ-N-290 Connectors for RG-316 .............................................................. 700 Uncabled receptacles ................................................................. 600 MATING ENGAGEMENT FOR MCX REVERSE POLARITY SERIES PER FCC RULE 15 NON-STANDARD INTERFACE JACK PLUG JACK PLUG NOTES 1. ID of contact to meet VSWR mating characteristics and connector durability when mated with a dia019-.021 (0.48-0.53) male contact. 2. Must meet the force to engage and disengage when mated with Avoid user injury due to misapplication. mating part. See safety advisory definitions inside front cover. ** All gold plated parts include a .00005 min. nickel underplate barrier layer. CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om