MMCX - 50 Ohm Connectors Straight Crimp Type Plug - INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST Solder or Crimp Captivated Contact CABLE TYPE PART NUMBER A D TERMINATION RG-316/U, 188, 161, 174 135-3403-001 .509 (12.93) .173 (4.39) Crimp Sleeve 1. Identify connector parts. (3 piece parts) 2. Strip cable jacket to dimensions shown. Do not nick braid or center conductor during strip operations. Tin center conductor if contact will be solder attached. Do not tin center conductor if contact is to be crimp attached. Slide crimp sleeve onto cable jacket. 3. Assemble contact onto cable as shown. Solder attachment: Solder contact to center conductor. Care should be taken that excess solder is not applied. Crimp attachment: Crimp contact to center conductor using TM Johnson Components hand tool 140-0000-952 and die set 140-0000-953. Crimp location should be centered between end of contact and cross-hole. Crimp attachment to solid center conductor cables is not recommended. 4. Slide body assembly over contact and under braid, then seat firmly onto contact as shown. The body assembly will snap over the contact barb. The cable may have to be held in a soft jawed clamping fixture. Slide crimp sleeve forward and crimp using recommended crimp die hex. CABLE PART CRIMP GROUP NUMBER HEX RG-316/u, 188, 161, 174 135-3403-001 .128 (3.25) 1 CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om MMCX - 50 Ohm Connectors Specifications INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST ELECTRICAL RATINGS MECHANICAL RATINGS Impedance: 50 ohms Engagement Design: Series MMCX Frequency Range: Connectors ................................................ 0-6 GHz Engagement/Disengagement Force: 8 lbs. max axial engagement Dummy loads ............................................ 0-1 GHz 1.4 lbs. min axial disengagement VSWR: (f = GHz) Straight Right Angle Contact Retention: 2.0 lbs. minimum axial force Cabled Connectors Cabled Connectors Cable Retention: Axial Force* Torque .047 dia flexible ....................................1.20 1.14 + .07f (pounds) (in-oz) RG-178, RG-316, RG-316DS ..............1.20 1.25 Connectors for .047 flexible ........................ 3.5 N/A .086 semi-rigid .....................................1.15 1.15 Connectors for RG-178 ...............................7.0 N/A Uncabled receptacles, dummy loads ................................................ N/A Connectors for RG-316 ..............................20.0 N/A Working Voltage: Connectors .........................170 Vrms at sea level Connectors for RG-316DS .........................25.0 N/A Dummy loads ................................................... N/A Connectors for .086 semi-rigid ................... 30.0 16 Dielectric Withstanding Voltage: Connectors...500 Vrms at sea level *Or cable breaking strength whichever is less. Dummy loads ............................ N/A Durability: .............................................................. 500 cycles minimum Insulation Resistance: 1000 megohms min Contact Resistance: (milliohms maximum) After ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph Initial Environmental of MIL-C-39012) Center contact (straight cabled connectors Operating Temperature: Connectors ......................... - 65C to + 165C and uncabled receptacles) ......................5.0 8.0 Dummy loads .................... - 65C to + 125C Center contact (right angle cabled Thermal Shock: Connectors: MIL-STD-202, Method 107, Condition C, connectors) ..............................................5.0 15.0 except -55C to + 155C (N/A dummy loads) Outer contact (all connectors) .....................1.0 1.5 Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads) Braid to body ...............................................1.5 N/A Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads) Corona Level: Connectors ..................... 190 volts min at 70,000 feet Vibration: MIL-STD-202, Method 204, Condition D (N/A dummy loads) Dummy loads ......................................................... N/A Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads) Insertion Loss: (dB max tested at 1 GHz) Straight cabled connectors .............................................................. 0.1 MATERIAL SPECIFICATIONS Right angle cabled connectors ........................................................ 0.2 Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001 Uncabled receptacles, dummy loads ............................................. N/A min. RF Leakage: (dB minimum, tested at 2.5 GHz) Contacts: Beryllium copper per QQ-C-530, gold plated* per MIL-G- Flexible cable connectors .......................................................... -60 dB 45204 .00003 min086 semi-rigid ........................................................................... -70 dB Interface Spring: Beryllium copper per QQ-C-530, gold plated* per Dummy loads ................................................................................. N/A MIL-G-45204 .00003 min. RF High Potential Withstanding Voltage: (400 Vrms at 4 and 7 MHz) Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Power Rating (Dummy Load): - 0.5 watt +25C, derated to 0.25 Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-626, gold watt +125 C plated per MIL-G-45204 .00001 min. Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001 min. Avoid user injury due to misapplication. See safety advisory definitions inside front cover. *All gold plated parts include a .00005 min nickel barrier layer. JACK PLUG Mating Engagement for MMCX Series 1. ID of contact to meet VSWR mating characteristics and connector durabil- ity when mated with a dia .016 +/- .001 male contact. 2. Must meet the force to engage and dis- engage when mated with mating part. JACK PLUG 2 CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om