MMCX Straight PC Mount INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST Jack Receptacle L PART NUMBER .115 (2.92) 135-3701-201 .068 (1.73) 135-3701-211 Mounting Hole Layout CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om MMCX - 50 Ohm Connectors Specifications ELECTRICAL RATINGS MECHANICAL RATINGS Impedance: 50 ohms Engagement Design: Series MMCX Frequency Range: Connectors ................................................ 0-6 GHz Engagement/Disengagement Force: 8 lbs. max axial engagement Dummy loads ............................................ 0-1 GHz 1.4 lbs. min axial disengagement VSWR: (f = GHz) Straight Right Angle Contact Retention: 2.0 lbs. minimum axial force Cabled Connectors Cabled Connectors Cable Retention: Axial Force* Torque .047 dia flexible ....................................1.20 1.14 + .07f (pounds) (in-oz) RG-178, RG-316, RG-316DS ..............1.20 1.25 Connectors for .047 flexible ........................3.5 N/A .086 semi-rigid .....................................1.15 1.15 Connectors for RG-178 ...............................7.0 N/A Uncabled receptacles, dummy loads ................................................ N/A Connectors for RG-316 ..............................20.0 N/A Working Voltage: Connectors .........................170 Vrms at sea level Connectors for RG-316DS .........................25.0 N/A Dummy loads ................................................... N/A Connectors for .086 semi-rigid ...................30.0 16 Dielectric Withstanding Voltage: Connectors...500 Vrms at sea level *Or cable breaking strength whichever is less. Dummy loads ............................ N/A Durability: .............................................................. 500 cycles minimum Insulation Resistance: 1000 megohms min Contact Resistance: (milliohms maximum) After ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph Initial Environmental of MIL-C-39012) Center contact (straight cabled connectors Operating Temperature: Connectors ......................... - 65C to + 165C and uncabled receptacles) ......................5.0 8.0 Dummy loads .................... - 65C to + 125C Center contact (right angle cabled Thermal Shock: Connectors: MIL-STD-202, Method 107, Condition C, connectors) ..............................................5.0 15.0 except -55C to + 155C (N/A dummy loads) Outer contact (all connectors) .....................1.0 1.5 Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads) Braid to body ...............................................1.5 N/A Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads) Corona Level: Connectors ..................... 190 volts min at 70,000 feet Vibration: MIL-STD-202, Method 204, Condition D (N/A dummy loads) Dummy loads ......................................................... N/A Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads) Insertion Loss: (dB max tested at 1 GHz) Straight cabled connectors .............................................................. 0.1 MATERIAL SPECIFICATIONS Right angle cabled connectors ........................................................ 0.2 Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001 Uncabled receptacles, dummy loads ............................................. N/A min. RF Leakage: (dB minimum, tested at 2.5 GHz) Contacts: Beryllium copper per QQ-C-530, gold plated* per MIL-G- Flexible cable connectors .......................................................... -60 dB 45204 .00003 min086 semi-rigid ........................................................................... -70 dB Interface Spring: Beryllium copper per QQ-C-530, gold plated* per Dummy loads ................................................................................. N/A MIL-G-45204 .00003 min. RF High Potential Withstanding Voltage: (400 Vrms at 4 and 7 MHz) Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Power Rating (Dummy Load): - 0.5 watt +25C, derated to 0.25 Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-626, gold watt +125 C plated per MIL-G-45204 .00001 min. Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001 min. Avoid user injury due to misapplication. See safety advisory definitions inside front cover. *All gold plated parts include a .00005 min nickel barrier layer. JACK PLUG Mating Engagement for MMCX Series 1. ID of contact to meet VSWR mating characteristics and connector durabil- ity when mated with a dia .016 +/- .001 male contact. 2. Must meet the force to engage and dis- engage when mated with mating part. JACK PLUG CCinincch Ch Coonnnnecectitivitvity Soy Solulutitioonsns 299 J299 Johnsohnson Aon Avveennue Sue SWW, W, Waassecaeca, MN 56093 U, MN 56093 USSA 800.247.8256 +1 507 833 8822 cA 800.247.8256 +1 507 833 8822 cincinchchconneconnectitivitvityy.c.com om