Bel Power Solutions DP7115G is an intelligent, fully programmable step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power- On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the Input voltage range: 8 V14 V DP7115G are programmable via Bel Power Output voltage range: 0.7 V5.5 V at 0 15 A. 2 Solutions I C based GUI. All settings can be Programmable dynamic output voltage positioning changed by a user at any time during product for better load transient response development and service. Once programmed, the Choice of 500 KHz switching for highest efficiency DPM remembers all settings and configures the or 1MHz for lowest ripple noise. DP7115G through a self-clocking single wire Flexible Fault Response features communication bus. Multiple turn-on/off slew rates and delays FLASH memory in the DPM allows changes to be Digital Filter Compensation made without the need to solder or rewire the Synchronous operation with other supplies regulator. Real time performance monitoring GUI based configuration for short development time. Small footprint Vertical format SMT package: 8 x 32 x 14 mm Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC60950-1 North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00258 AC DP7115G DP 71 15 G zz OUTPUT RoHS 1 PRODUCT FAMILY SERIES DASH PACKAGING OPTIONS CURRENT COMPLIANCE G - RoHS compliant R100 - 100pc T&R d-pwer Intelligent dPOL Converter 15 A for all six substances Q1 1pc sample for evaluation only Example: DP7115G-R100: A 100-piece reel of RoHS compliant dPOL converters. Each dPOL converter is labelled DP7115G. Reference Documents DM7300 Digital Power Manager Data Sheet DM7300 Digital Power Manager Programming Manual 2 Bel Power Solutions I C Graphical User Interface 2 DM00056-KIT USB to I C Adapter Kit. User Manual Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long term reliability, and cause permanent damage to the converter. PARAMETER CONDITIONS / DESCRIPTION MIN MAX UNITS Inductor or Printed Circuit Board Input Voltage applied -40 125 C (PCB) Temperature Input Voltage 250 ms Transient 15 VDC Output Current (See Output Current De-rating Curves) -12 15 ADC Specifications apply at the input voltage from 8 V to 14 V, output load from 0 to 15 A, ambient temperature from -40C to 85C. Test conditions include an output filter with 3 x 330 F 20 m solid electrolytic, plus 2 x 22 F X7R ceramic output capacitors, unless otherwise noted. 3.1 INPUT SPECIFICATIONS PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Input voltage (V ) 8 14 VDC IN Input Current (at no load) VIN = 14.0 V, VOUT = 3.3 V 50 mADC Ramping Up 7.5 VDC Undervoltage Lockout 5 Ramping Down VDC Current drawn from the external low voltage supply at VLDO Input Current 50 mADC VLDO = 8 V 1 Packaging option is used only for ordering and not included in the part number printed on the dPOL converter label. +1.866.513.2839 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00258 AC