Bel Power Solutions DP8160G is a second generation intelligent, fully programmable multi-phase step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of Wide input voltage range: 8V14V the DP8160G are all programmable via Bel Programmable key features 2 A voltage out range of 0.7V2.75V at 0 to 60A. Power Solutions I C based GUI. All settings Efficiency greater than 92% with a built in can be changed by a user at any time during heat sink. product development and service. Once Three phase 500 kHz switching for low ripple programmed, the DPM remembers all settings noise. Flexible Fault Response features and configures the DP8160G through a self- Multiple turn-on/off slew rates and delays clocking single wire communication bus. Digital Filter Compensation Synchronous operation with other supplies FLASH memory in the DPM allows changes to Real time performance monitoring be made without the need to solder or rewire GUI based configuration for short the regulator. development time. Low height of 1.1 suitable for 1U high enclosures Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC60950-1 North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00265 AC DP8160G Example: DP8160G-T050: A 50-piece tray of RoHS compliant dPOL converters. Each dPOL converter is labelled DP8160G. Reference Documents DM7300 Digital Power Manager Data Sheet DM7300 Digital Power Manager Programming Manual 2 I C Graphical User Interface 2 DM00056-KIT USB to I C Adapter Kit. User Manual Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long- term reliability and cause permanent damage to the converter. PARAMETER CONDITIONS / DESCRIPTION MIN MAX UNITS Inductor Temperature Input Voltage applied -40 125 C Input Voltage 250ms Transient 15 VDC Specifications apply at the input voltage from 8V to 14V, output load from 0 to 60A, ambient temperature from - 40C to 85C, and default performance parameters settings unless otherwise noted. 3.1. INPUT SPECIFICATIONS PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Input Voltage (VIN) 8 14 VDC Input Current (at no load) VIN = 12 V, VOUT = 2.0 V 290 mADC 1 Packaging option is used only for ordering and not included in the part number printed on the dPOL converter label. +1.866.513.2839 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00265 AC