DSP1N5D15 Bel Fuse

The DSP1D Series is specifically designed to convert a nominal 5 volt input into two isolated output voltages. The dual semi-regulated output voltages were designed to allow analog circuits and three-terminal regulators to operate within their most efficient input voltage range. This series achieves high power densities through the use of 350 kHz fixed-frequency switching converters. RoHS lead solder exemption compliant Up to 1 Watt unregulated output power Single-In-Line package Four-terminal operation Efficiencies to 70% Output Voltages: 5V, 7V, 12V, 14V, 15V, 17V 700 V isolation -40 C to +85 C operation LAST TIME BUY2 DSP1D Series INPUT RANGE VDC OUTPUT MODEL MIN MAX VDC mA POWER W xxxx Model numbers highlighted in yellow are not recommended for new designs. PARAMETER CONDITIONS / DESCRIPTION MIN TYP MAX UNITS Isolation Isolation Voltage 500 VDC Capacitance Input to Output 10 pF Output Trim Function k Input Resistance 40 Programming Range +5, -34 % Environmental 2 Case Operating Range (TC) -40 85 C Storage Range -55 105 C Line Regulation 1 % Load Regulation 20% to 100% Load 5 % General MTBF Calculated 700,000 hrs Weight 0.1/28 oz/g Case Material Non Conductive Plastic NOTES 1 All parameters measured at Tc = 25 C, nominal input voltage and full rated load unless otherwise noted. 2 Derate output power linearly to 0.6 watts from 70 C to 85 C. tech.support psbel.com LAST TIME BUY