DSP1N5S12 Bel Fuse

The DSP1 Series is specifically designed to convert a nominal 5 Volt input into an isolated output voltage. The semi-regulated output voltages were designed to allow analog circuits and three terminal regulators to operate within their most efficient input voltage range. This series achieves high power densities through the use of 350 kHz fixed-frequency switching converters. RoHS lead solder exemption compliant Up to 1 Watt unregulated output power Single-In-Line package Four-terminal operation Efficiencies to 75% Output Voltages: 5V, 7V, 12V, 14V, 15V, 17V 700 V isolation -40 C to +85 C operation LAST TIME BUY2 DSP1S Series INPUT RANGE VDC OUTPUT MODEL MIN MAX VDC mA POWER W PARAMETER CONDITIONS / DESCRIPTION MIN TYP MAX UNITS Isolation Isolation Voltage Input to Output 10 A 700 VDC Capacitance Input to Output 25 pF Environmental 2 Case Operating Range (T ) -40 85 C C Storage Range -55 105 C 3 Thermal Impedance 58 C / Watt General MTBF Calculated 700,000 hrs Weight 0.1/28 oz/g Case Material Non Conductive Plastic NOTES 1 All parameters measured at Tc = 25 C, nominal input voltage and full rated load unless otherwise noted. 2 Derate output power linearly to 0.6 watts from 70 C to 85 C. 3 The case Thermal Impedance is specified as the case temperature rise over ambient per package dissipated. tech.support psbel.com LAST TIME BUY