HP Series 120 - 192 Watt 10:1 DC-DC Converters These extremely compact DC-DC converters incorporate all necessary input and output filters, signaling and protection features, which are required in the majority of applications. The converters provide important advantages, such as flexible output power through total current limitation, extremely high efficiency, excellent reliability, very low ripple and RFI noise levels, full input-to-output isolation, negligible inrush current, soft start, over temperature protection, inter ruption time, and input over- and undervoltage lockout. Features Extremely wide input voltage range from 12.5 to 154 VDC in the same model RoHS-compliant 5 year warranty Class I equipment Compliant with EN 50155, EN 50121-3-2, and IEC/EN 61000-4-2, -3, -4, -5, -6, -8 Fire&smoke: Compliant with EN 45545-2 Input over- and programmable undervoltage lockout including inhibit function Low inrush current 111 10 ms interruption time 4.4 3 U 1 to 4 independent, isolated outputs: no load, overload, and short-circuit proof 164 20 6.5 Rectangular current limiting characteristic 0.8 4 TE Redundant operation (n+1), sense lines, active current sharing option, output voltage adjust Hipot test voltage 2.8 kVDC Very high reliability and efficiency up to 92.5 % All PCB boards protected by lacquer Extremely slim case (4 TE, 20 mm), fully enclosed Safety-approved to IEC/EN 62368-1 3rd edition and UL/CSA 62368-1 3rd edition. Table of Contents Description........................................................................................2 Electromagnetic Compatibility (EMC) .............................................20 Model Selection ................................................................................2 Immunity to Environmental Conditions ...........................................22 Functional Description ......................................................................5 Mechanical Data .............................................................................24 Electrical Input Data .........................................................................8 Safety and Installation Instructions .................................................25 Electrical Output Data.....................................................................11 Description of Options ....................................................................27 Auxiliary Functions .........................................................................18 Accessories ....................................................................................28 belfuse.com/power-solutions BCD.00316 Rev. AP, 14-Dec-2020HP Series 120 - 192 W 10:1 DC-DC Converters Description The converters are particularly suitable for rugged environments, such as railway applications. They have been designed in accordance with the European railway standards EN 50155 and EN 50121-3-2. All printed circuit boards are coated with a protective lacquer. The converter covers a total input voltage range from 12.5 to 154 VDC in the same model. The input is protected against surges and transients occurring on the source lines. The outputs are continuously open- and short-circuit proof. Full system flexibility and n+1 redundant operating mode are possible due to series or parallel connection capabilities of the outputs under the specified conditions. When several con verters with T option are connected in parallel, a single-wire connection between these converters ensures good current sharing. LEDs at the front panel and an isolated output OK signal indicate the status of the converter. Voltage suppressor diodes and an independent overvoltage monitor protect the outputs against an internally generated over voltage. The converters are designed using transformers with planar technology. The input voltage is fed to a booster, which generates approximately 70 V. If V is higher, the booster becomes simply a diode. The resulting intermediate voltage supplies the powertrains. i There are two powertrains fitted to a converter, each con sisting either of a regulated single output with synchronous rectifier or of a regulated main output with a tracking second output. The output power may be flexibly distributed among the main and the tracking output of each powertrain. Close magnetic coupling in the transformers and output inductors together with circuit symmetry ensure a small deviation between main and tracking output. A storage capacitor charged to approx. 70 V enables the powertrains to operate during the specified interruption time. As part of a distributed power supply system, the low-profile design significantly reduces the required volume without sacrificing high reliability. The converters are particularly suitable for 19 rack systems occupying 3 U /4 TE only, but they can also be chassis- mounted by screws or fitted with a heat sink. The connector type is H15. The fully enclosed black-coated aluminum case acts as heat sink and RFI shield, such protecting the converter together with the coating of all components against environmental impacts. Model Selection Note: Only standard models are listed. Other voltage con figu ra tions are possible on request. Table 1: Model Selection Output 1, 4 Output 2, 3 Input voltage Efficiency Model Options 1 2 24 110 5 6 5 6 3 3 V P P V P P V V V min typ min typ o nom o nom o 50 o nom o nom o 50 o min o cont o max V W W V W W V V V % % % % 5.1 122 184 - - - 89 90.5 HP1001-9RTG 12 122 192 - - - 91 92.5 HP1301-9RTG 12.5 16.8 - 137.5 154 86.5 87 U, V, B 15 122 192 - - - 89.5 91 HP1501-9RTG 24 122 192 - - - 89 90 HP1601-9RTG 5.1 61 92 5.1 61 92 89 90.5 HP2001-9RG 5.1 61 92 12 61 96 90 91.5 HP2020-9RG 7 5.1 61 92 15 61 96 12.5 16.8 - 137.5 154 86.5 89.5 87 91 HP2040-9RG U, V, T , B 12 61 96 12 61 96 91 92.5 HP2320-9RG 15 61 96 15 61 96 89.5 91 HP2540-9RG 24 60 96 24 60 96 12.5 16.8 - 137.5 154 86.5 88 87 89.5 HP2660-9RG U, V, B 4 5.1 61 92 12, 12 60 96 88.5 90 HP3020-9RG 4 7 5.1 61 92 15, 15 60 96 12.5 16.8 - 137.5 154 86.5 88 87 90 HP3040-9RG U, V, T , B 4 5.1 61 92 24, 24 60 96 89 90 HP3060-9RG 4 4 12, 12 60 96 12, 12 60 96 88 90 HP4320-9RG 4 4 15, 15 60 96 15, 15 60 96 88 89.5 HP4540-9RG 12.5 16.8 - 137.5 154 86.5 87 U, V, B 4 4 15, 15 60 96 24, 24 60 96 88 89.5 HP4560-9RG 4 4 24, 24 60 96 24, 24 60 96 88 89.5 HP4660-9RG 1 Efficiency at T = 25 C, V = 24 V, I , V A i o nom o nom 2 Efficiency at T = 25 C, V = 110 V, I , V A i o nom o nom 3 Short time see table 2 for details 4 Isolated tracking output 5 P is specified at T = 70 C o nom amb 6 P is specified at T = 50 C and V = 22 V. For V = 22, only 90% of P are continuously possible o 50 amb i i o 50 7 T replaces R tech.support psbel.com belfuse.com/power-solutions BCD.00316 Rev. AP, 14-Dec-2020 2020 Bel Power Solutions & Protection Page 2 of 28