Mounting Supports Accessories Special mounting supports have been designed for the integration of power supplies into switch boards, control panels, printed circuit boards, etc., using adapters for chassis-, DIN- rail, or PCB mounting. The 19-inch cassette style DC-DC and AC-DC converters can also be chassis-mounted with frontal access by means of a special Chassis Mounting Plate, attached to the converters. The Universal Mounting Bracket also fits to most of these cassette type converters, allowing for either vertical-chassis or DIN-rail mounting. A Bracket Kit, consisting of a PCB with screw-terminal connectors and a brackets suitable for either chassis or DIN-rail mounting, is available either for PCB mountable PSR and PSA Switching Regulators with option pins or for small DC-DC converters up to 15 Watt. For isolation of the PCB-mountable converters from a double- sided PCB, the use of Isolation Pads is re commended, as described below. RoHS-compliant products are available on request. Note: All dimensions are in mm, unless otherwise specified. Table of Contents Description........................................................................................1 CMB/DMB for IMX4 / IMS6 Series (with option K) .......................8 Chassis and Wall Mounting Plates ...................................................2 Supports for 7 W Converters .........................................................9 Universal Mounting Brackets ...........................................................4 Basic Kit for Chassis Mounting: HZZ00617-G (CMBIMX/S7) .......9 Series H, M, Q, P, HP, PSL ..........................................................4 Basic Kit for DIN-Rail Mounting: HZZ00613-G (DMBIMS/X7) .....9 Series W and X ............................................................................5 Mounting Instructions for Basic Kit ..............................................9 DIN-Rail Mounting Brackets (DMB)............................................5 Double-output models IMX7, IMS7, IML10 .................................10 Chassis Mounting Brackets (CMB) ..............................................6 Application-Specific Circuitry ......................................................10 DIN-Rail- and Chassis-Mounting Supports ......................................6 Supports for 15 W Converters ....................................................... 11 Chassis Mounting Support (CMB) ..............................................7 Basic Kit for Chassis Mounting: HZZ00626-G (CMBIMX15) ...... 11 DIN-Rail Mounting Support (DMB) ..............................................7 Basic Kit for DIN-Rail Mounting: HZZ00628-G (DMBIMX15) ....12 Electrical Description of CMB/DMB for PSR/PSA Series ............8 Application-Specific Circuitry .....................................................12 belfuse.com/power-solutions BCD.20007 Rev. AJ, 8 Oktober 2021Mounting Supports Accessories Chassis and Wall Mounting Plates For chassis mounting of 19 cassette-style converters, where only frontal access to the mounting screws is given, special chassis mounting plate adapters are available according to the following table and figures 1 to 3. Table 1: Mounting Plate survey Case Converter Part number Delivery content Fig. size series description M02 M Mounting plate XMK085-G HZZ01210-G H02 H 4 countersunk screws 1 Mounting plate M M36 Q01 Q 4 serrated sunk washers Q04 P Q05 HP Q01 Q Mounting plate XMK162-G with brackets HZZ01215-G Q04 P 2 Mounting plate Q 4 countersunk screws Q05 HP M36 Fig. 1a K02 1 1 1 Mounting plate M (HZZ01210-G), K , PSK , R Mounting plate XMK074 K03 HZZ01213-G connector with faston terminals (HZZ00101-G), 3 4 countersunk screws Mounting plate K S02 secured with retention clips (HZZ01209-G) 1 1 1 M410 S , PSS , R S03 1 with Option B1 Note: The mounting plate K fits to K, S, PSK, PSS, RP, R converters with opt. B1. However, it is possible to order these converters directly with option B. Such converters exhibit the same mounting plate as shown in fig. 1. 133 16.3 115 25.5 6.5 4.5 12020a M3 6 Washer 4.5 / 9 90 XMK085-G M3 6 Washer 127 19.5 3 166 Fig. 1b HZZ001210 (mounting plate M) Aluminum, black anodized tech.support psbel.com belfuse.com/power-solutions BCD.20007 Rev. AJ, 8 Oktober 2021 2021 Bel Power Solutions & Protection Page 2 of 12 140 128 6 11.2 18.5 103.5