ZY2110 10A No-Bus POL Data Sheet 8V to 14V Input 0.5V to 5.5V Output Member of the Family Features RoHS lead free and lead-solder-exempt products are available Wide input voltage range: 8V14V High continuous output current: 10A Wide programmable output voltage range: 0.5V5.5V Output voltage margining Overcurrent and overtemperature protections Overvoltage and undervoltage protections, and Power Good signal tracking the output voltage setpoint Applications Tracking during turn-on and turn-off with guaranteed Low voltage, high density systems with Intermediate Bus Architectures (IBA) slew rates Sequenced and cascaded modes of operation Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessor applications Single-wire line for frequency synchronization Industrial computing, servers, and storage between multiple POLs Broadband, networking, optical, and wireless Programmable feedback loop compensation communications systems Enable control Active memory bus terminators Flexible fault management and propagation Start-up into the load pre-biased up to 100% Benefits Current sink capability Integrates digital power conversion with intelligent Industry standard size through-hole single-in-line power management package: 1.2x0.26 Eliminates the need for external power Low height of 0.84 management components and communication bus Wide operating temperature range: 0 to 70C Completely programmable via pin strapping and UL 60950-1/CSA 22.2 No. 60950-1-07 Second one external resistor Edition, IEC 60950-1: 2005, and EN 60950-1:2006 One part that covers all applications Reduces board space, system cost and complexity, and time to market Description Power-Ones point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The ZY2110 is an intelligent, fully programmable step-down point-of-load DC-DC module integrating digital power conversion and power management. The ZY2110 completely eliminates the need for external components for sequencing, tracking, protection, monitoring, and reporting. Performance parameters of the ZY2110 are programmable by pin strapping and an external resistor and can be changed by the user at any time during product development and service without a need for a communication bus. Reference Documents TM No-Bus POL Converters. Application Note Z-One POL Converters. Eutectic Solder Process Application Note Z-One POL Converters. Lead-Free Process Application Note ZD-02013 Rev. BB4, 11-Oct-2011 www.power-one.com Page 1 of 13 ZY2110 10A No-Bus POL Data Sheet 8V to 14V Input 0.5V to 5.5V Output 1. Ordering Information ZY 21 10 y zz 2 Product Series: Output RoHS compliance: Dash Packaging Option : family: No-Bus Current: No suffix - RoHS compliant with Pb solder R1 48 pcs Tray 1 Z-One POL 10A exemption Q1 1 pc sample for Module Converter G - RoHS compliant for all six substances evaluation only 1 The solder exemption refers to all the restricted materials except lead in solder. These materials are Cadmium (Cd), Hexavalent chromium (Cr6+), Mercury (Hg), Polybrominated biphenyls (PBB), Polybrominated diphenylethers (PBDE), and Lead (Pb) used anywhere except in solder. 2 Packaging option is used only for ordering and not included in the part number printed on the POL converter label. Example: ZY2110G-R3: A 48-piece tray of RoHS compliant POL converters. Each POL converter is labeled ZY2110G. 2. Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long- term reliability, and cause permanent damage to the POL converter. Parameter Conditions/Description Min Max Units Operating Temperature Controller Case Temperature -40 105 C Input Voltage 250ms Transient 15 VDC 3. Environmental and Mechanical Specifications Parameter Conditions/Description Min Nom Max Units Ambient Temperature Range 0 70 C Storage Temperature (Ts) -55 125 C Weight 6 grams Frequency Range 5 500 Hz Operating Vibration Magnitude 0.5 G (sinusoidal) Sweep Rate 1 oct/min Repetitions in each axis (Min-Max-Min Sweep) 2 sweeps Acceleration 50 G Non-Operating Shock Duration 11 ms (half sine) Number of shocks in each axis 10 MTBF Calculated Per Telcordia Technologies SR-332 TBD MHrs Peak Reflow Temperature ZY2110 220 C Peak Reflow Temperature ZY2110G 245 260 C Lead Plating ZY2110 and ZY2110G 100% Matte Tin Moisture Sensitivity Level JEDEC J-STD-020C 3 ZD-02013 Rev. BB4, 11-Oct-2011 www.power-one.com Page 2 of 13