BIAS 1 Watt Power Supply BPWX 1 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPWX 1-08-00, -08-33, -08-50 Actual Size BPWX 1-14-00, -14-33, -14-50 Features: The BPWX is a revolutionary, micro -sized, drop-in switching power supply Extended Temperature with NO DE-RATING module. It contains patented technology with unique features that (-40 to +85C ) provide solutions for a wide range of applications, including low power Universal Input (90-308 VAC, 50/60Hz) wireless and many other intelligent control devices. The patented SMPS 3 3 Small Size0.55in 9.0cm topology is totally different from any other: Low no-load input power <30mW It s Quiet: Switching is synchronized and occurs only 10% of the time, so Constant power mode (not current limit) there is very little EMI / EMC interference with other circuits. This means no 3000 VAC Isolation extra filtering or shielding is needed, helping to achieve longer transmission EN 55022, Class B FCC Part 15, Class B range with more reliable data communication in low power wireless Meets UL/CSA and EN Product Safety (ITE) applications. It s Powerful: No power de-rating across the full wide temperature range. Bias Power AC/DC power supplies are available with two No current limit design margin needed when selecting a module. Charge different types of outputs to fit your applications large super caps faster than any regular SMPS with twice the power rating. The characteristics of the main (Vo) and auxiliary (Vr) outputs It s Green: High efficiency with ultra low standby power and very little self are different and each has application -specific benefits which generated heat make it ideal for intelligent devices such as smart-sensors, can provide high value to the system designer: smart-meters, smart-lighting, smart -grid, M2M or IoT , and any other control Vo is a voltage-regulated output which has a constant power applications. mode instead of a conventional current limit. This output is best suited as a source for isolated DC utility power, which may Operating Specicatifi ons be used directly or post-regulated with either a linear regulator ( 120VAC / 60 Hz / 25C unless otherwise specified) or a DC/DC converter. Vo is self protecnti g, cannot be over- loaded and can be shorted indefinitely. So unlike design-your- Electrical own, or partially complete modules where significant design Input Voltage Range 90 - 308 VAC (50/60Hz) margin is required to stay far away from current limit, there is Input Surge Withstand 345V, < 30 sec no need to oversize a Bias Power supply. The graceful transi- 1.0 W (60Hz) tion from voltage regulation to constant power along with the Output Power (Pmax) 0.83 W (50Hz) wide range of product ratings allows the designer to select a Efficiency 70% nom. supply tightly matched to the design load. Output Vo (Peak) 8 or 14 VDC nom. +/- 5% Vr is also a voltage-regulated output and is thermally protected Line / Load Regulation Vo (Peak) +/- 1% Po < Pmax from overload. It has very low output ripple capable of driving Temperature Regulation Vo (Peak) +/- 2% Po < Pmax elements which require a low-noise, tightly -regulated supply. Ripple Vo ( 120 Hz) 1.00 V p:p In addition, Vr is supplied internally by Vo. This means that any ( 100 kHz) 0.25 V p:p For Vo = 8V, Ir out 53mA max, Io+Ir 125mA* capacitance added to Vo can increase the hold-up time of Vr as Output Vr, 3.3 volt (+/- 5%) For Vo = 14V, Ir out 23mA max, Io+Ir 71mA* well. For Vo = 8V, Ir out 83mA max, Io+Ir 125mA* *Note: maximum currents specified for constant voltage range Output Vr, 5.0 volt (+/- 5%) For Vo = 14V, Ir out 28mA max, Io+Ir 71mA* only. See V-I curve on page 2 for Vo in constant power range. No-load Consumption 30 mW typical Vin=120 VAC 3000 VAC (meets UL / CSA & Isolation EN Product Safety) Earth Leakage 120 VAC < 10 uA Short Circuit Protecoti n Continuous, Pin 0.6 w Vin = 120 VAC Reliability 25 C, MIL HDBK-217F > 500 Khr MTBF Thermal o Operating Temperature -40 to +85 C Operating Relative Humidity 0 95%, non-condensing o Storage Temperature -40 to 105 C Mechanical Package Size 1.10 x 0.92 x 0.55 inches (L x W x H) 27.94 x 23.24 x 13.97 mm Safety nd Safety Compliance UL / EN 60950-1 2 Ed. (CB Report Available) EMI Emissions EN 55022, Class B, FCC Part 15, Class B BPWX 1 Series Data Sheet, Page 1 of 2 Revised 12/10/2013 www.biaspower.com Specifications subject to change BIAS 1 Watt Power Supply BPWX 1 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPWX 1-08-00, -08-33, -08-50 BPWX 1-14-00, -14-33, -14-50 PIN DESCRIPTION Part Number Designation L1 Input High Part Number Output Configuration Vo Vr L2 Input Low BPWX 1-08-00 Single output 8 VDC N/A BPWX 1-14-00 Single output 14 VDC N/A N/C No Connection BPWX 1-08-33 Dual Output 8 VDC 3.3 VDC Vo Output BPWX 1-08-50 Dual Output 8 VDC 5 VDC GND Ground BPWX 1-14-33 Dual Output 14 VDC 3.3 VDC BPWX 1-14-50 Dual Output 14 VDC 5 VDC Vr Vr Output N/C No Connection NOTES 1. Pins 0.031 0.787 mm round Recommended Land Pattern, top view 2. Pins extend 0.125 3.175 mm below stand-offs Recommended Isolation, Bottom View V-I Curve (For Vo in Constant Power Range) V-I, typical 10 9 Constant Power Region 8 7 6 5 4 3 2 1 0 0 100 200 300 400 500 Io, mA BPWX 1 Series Data Sheet, Page 2 of 2 Revised 12/10/2013 www.biaspower.com Specifications subject to change Vo, volts