TEST LEADS Digital Low Resistance Ohmmeters TEST LEADS Digital Low Resistance Ohmmeters DLRO10X 247000 Extensive range of lead types and lengths from the leader in low resistance testing Wide variety of Kelvin clips, C-clamps, dual points and individual leads Used with a multitude of Megger DLROs from 2A to 600A output Contacts, bonding, battery straps, graphite electrodes, motor windings, and many more applications DLRO200 DLRO10HD points. Therefore, either a current lead in tandem with a Megger, the leader in low resistance testing, uses a Kelvin- separate potential lead or a duplex lead set is required. A style test method to accurately take low resistance wide variety of lead sets is available and it may be possible readings. In order to take accurate readings, the potential to design custom leads to suit special applications. measurement is taken inside of the current injection INDIVIDUAL TEST LEADS Current Clip Lead Set Used in combination with 242021 potential leads. Potential Lead Set Separates the C and P connections Used in combination with 242041 current leads. Separates Current: 10 A the C and P connections Termination: Terminal clips Termination: Hand spikes Will fit: DLRO10HD, DLRO10, DLRO10X, 247000, 247001, Will fit: DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, BT51 247002, 247100, 247101, BT51 Cat. No. Length Cat. No. Length 242041-7 7 ft (2 m) 242021-7 7 ft (2 m) 242041-18 18 ft (5.5 m) 242021-18 18 ft (5.5 m) 242041-30 30 ft (9 m) 242021-30 30 ft (9 m) Cat. No. 242041-18 Cat. No. 242021-7TEST LEADS Digital Low Resistance Ohmmeters DUPLEX TEST LEADS Current Clip Lead Set This lead set is for current only and employs clamps with Helical Spring Point Leads a notched anvil to ensure a solid connection. A potential lead set is also required to complete the Kelvin pair. Handspikes with spring loaded tips that compress and rotate to ensure good contact. Spacing between P and C Current: 100 A probe tips is 0.4 in. (10 mm). Termination: Clamps Current: 10 A Will fit: 247100, 247101 (Maximum current capacity 20 A for C/N EV6111-022, 10 A for longer lead lengths) Cat. No. Length Will fit: 247100, 247101, DLRO10HD, DLRO10, DLRO10X 242144-16 16 ft (4.9 m) Cat. No. Length 242144-26 26 ft (8 m) 242011-7 7 ft (2 m) 242011-18 18 ft (5.5 m) 242011-30 30 ft (9 m) EV6111-022 8 ft (2.5 m) EV6111-023 20 ft (6 m) Cat. No. 242144-16 Cat. No. 242011-7 Duplex Hand Spikes Duplex hand spikes with spring loaded tips. One probe has LEDs that operate with the DLRO10 for connection indication and live warning. The DLRO10X can indicate test limit pass/fail. Spacing between P and C probe tips is 0.23 in. (6 mm). Current: 10 A Will fit: DLRO10HD, DLRO10, DLRO10X Cat. No. Length EV6111-503 4 ft (1.2 m) EV6111-517 8 ft (2.5 m) EV6111-518 4 ft (1.2 m) Cat. No. EV6111-503 (DH4)