PCB-TAINER SERIES 35-1 FEATURES Available with or without Flared Entry Choice of four board thick- nesses Choice of three materials Choice of nine finishes Spring design to retain PC boards APPLICATIONS Where metal guides are Series 35-1 PCB-Tainer DSCC 85020 & 85021 required Moderate heat transfer and MODERATE HEAT & VIBRATION APPLICATIONS vibration ELECTRICALLY & THERMALLY CONDUCTIVE Electrically and thermally conductive Install with rivets, screws or adhesives BERYLLIUM COPPER MATERIAL FOR GROUNDING APPLICATIONS For mechanical and thermal peformance data see the Technical OPTIONAL CENTER MOUNTING HOLE Applications section pages 77-94 MOUNTS WITH RIVETS, Meets the requirements of draw- SCREWS, OR ings 85020 and 85021 for flared SPRING DESIGN TO ADHESIVES RETAIN PC BOARDS SEE TECHNICAL entry, Defense Supply Center, APPLICATION/ Columbus. MOUNTING & INSTALLATION An optional 7.50 length is SECTION available as a special part: FOR SHEETMETAL CHASSIS DESIGNS Part No. 35-1X-T-15-F MATERIAL FLARED .008(.20) thick Beryllium MOUNTING HOLE ENTRY HARDWARE Copper or Stainless Steel OPTION OFF-CENTER TO AID IN PCB INSERTION WEIGHT .033 oz/in (0.37 gm/cm) Either material CENTER MOUNTING HOLE OPTION .310(7.88) .125(3.18) 1/2M.005(.13) .105(2.67) E .198(5.03) D M.005(.13)=L-.25(6.4) NOTE ON DIMENSIONS: ENGLISH LISTED FIRST RELAXED .52(13.2) FOLLOWED BY METRIC IN PARENTHESES L.02(.51) A TOLERANCES: UNLESS OTHERWISE SPECIFIED .XXX(.XX)=.01(.25) .XX (.X) =.02(.5) B FLARED ENTRY OPTION C .067(1.71) WITH BOARD +.003(.08) INSERTED -.000(.00) .141(3.58) .015 (.39) .250 (6.35) CENTER MOUNTING HOLE OPTION www.birtcherproducts.com 888-957-8291 50 PCB-TAINER SERIES 35-1 FINISH TABLE CONTACT FACTORY FOR OTHER FINISHES DASH FINISH (see pg.9 for RoHS Compliance) NONE SILVER PLATE PER QQ-S-365, TYPE III, GRADE A -1 NONE -2 EBANOL PER MIL-F-495 FOR BERYLLIUM COPPER -3 CADMIUM PLATE QQ-P-416 -4 COPPER PLATE PER MIL-C-14550, CLASS 2 -5 GOLD PLATE PER MIL-G-45204, TYPE 1, CLASS 1 -6 NICKEL PLATE PER QQ-N-290, CLASS 1, GRADE G, BRIGHT -7 ZINC PLATE CLEAR CHROMATE, PER ASTM-B-633, Fe/Zn 8 -8 ZINC PLATE YELLOW CHROMATE, PER ASTM-B-633 Fe/Zn 8 MATERIALS TABLE CODE LETTER MATERIAL FOR MECHANICAL AND B BERYLLIUM COPPER, 1/4H PER, ASTM-B-194 THERMAL PERFORMANCE BH BERYLLIUM COPPER, 1/4 HT PER QQ-C-533, HEAT TREATED SEE THE TECHNICAL APPLICATIONS CR STAINLESS STEEL, TYPE 301 COND 1/4 H PER AMS 5517 SECTION PAGES 77-94 DIMENSION TABLE A B D E C MAX BOARD DASH THICKNESS 35-1 35F-1 -1 .031(0.79) .180(4.58) .330(8.39) .360(9.15) .298(7.57) .156(3.97) -2 .063(1.60) .180(4.58) .330(8.39) .360(9.15) .298(7.57) .156(3.97) -3 .094(2.39) .180(4.58) .330(8.39) .360(9.15) .298(7.57) .156(3.97) -4 .125(3.18) .180(4.58) .370(9.40) .400(10.16) .330(8.39) .156(3.96) Part Number Code Series 35-1 PCB-Tainer 35 x x -1x -x -x -x Center Mounting Hole: Center Mounting Hole: C None: Blank Flared Entry PART NUMBER CODE: Flared Entry: F SERIES None: Blank CENTER MOUNTING HOLE (OPTIONAL) Material FLARED ENTRY OPTION (35-1 ONLY) Select Code Letter from Material Table : DASH NUMBER (-1 or -2) MATERIAL (SEE MATERIAL TABLE) Board Thickness BOARD THICKNESS (SEE BOARD THICKNESS TABLE) Select from Board Thickness Table : LENGTH IN 1/2 INCREMENTS (-4=2 THRU -12=6 ) Length LENGTH IN 12.7mm INCREMENTS In 1/2 increments: -4 = 2 thru -12 = 6 (-4=50.8mm THRU -12=152.4mm) In 12.7mm increments: -4 = 50.8mm thru -12 = 152.4mm FINISH (SEE FINISH TABLE) Special Part: 7.50 Length -15 Finish 35 C E -D -M -B -L -F Select from Finish Table : No dash number required for CR material. Stainless steel parts are passivated only. Order Code example: 35C-1B-2-4-7 Series 35-1 PCB-Tainer, with center mounting hole, Beryllium Copper, for .063(1.60) board thickness, 2.00 in(50.8mm) long, zinc plate clear chromate finish. www.birtcherproducts.com 888-957-8291 51