4-Pin Super Flux Blue LED Lamp Orca R Series (Flat Face) R20BLU-F-0160 RoHS Compliant Low Profile Dome Lens Automatic Insertion Compatible Tubular Packaging Automatic Placement Compatible High Intensity Output High Power Efficiency Bivar R20BLU-F-0160 comes with low profile package design incorporating higher forward current to max- imize intensity while minimizing the number of LEDs required to achieve uniform and enhanced light distri- bution. Low power consumption with quick response time means savings in electricity. Bivar R20BLU-F-0160 can be coupled with reflectors or lenses for optimal light distribution needs. Typical applications are automotive exterior lighting, decorative interior or exterior lighting, specialty stage lighting, and electronic signage. Part Number Material Emitted Color Intensity Typ. mcd Lens Color Viewing Angle R20BLU-F-0160 InGaN/Sapphire Blue 400 Water Clear 160 Outline Drawings Notes: ATTENTION 1. All dimensions are in inches millimeters . Moisture OBSERVE PRECAUTIONS 2. Standard tolerance: 0.010 unless otherwise noted. Sensitivity FOR HANDLING 3. Tolerance of overall epoxy outline: 0.020 unless otherwise noted. ELECTROSTATIC Levels 1 SENSITIVE DEVICES RoHS Compliant 4. Epoxy meniscus may extend to 0.060 max. Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision D 08/15 Phone: (949) 951-8808 Fax: (949) 951-3974 Web: www.bivar.com Page 1 of 4 4-Pin Super Flux Blue LED Lamp R20BLU-F-0160 Absolute Maximum Ratings T = 25C unless otherwise noted A Power Dissipation 220 mW Forward Current ( DC ) 50 mA 1 Peak Forward Current 100 mA Electrostatic Discharge ( Class1 ) 2000 V Reverse Voltage 5 V Operating Temperature Range -25 ~ +80C Storage Temperature Range -30 ~ +80C 2 Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 260C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics T = 25C & I = 20 mA unless otherwise noted A F Recommend Reverse Viewing Forward Dominant Luminous Forward Current (A) Angle 1 2 3 Voltage (V) Wavelength (nm) Emitting Intensity (mcd) Current (mA) V =5V 2 (deg) R Color MIN TYP MAX TYP MAX MIN MAX MIN TYP TYP Blue 2.7 3.2 3.6 20 10 465 475 200 400 160 Notes: 1. Tolerance of Forward Voltage : 0.05V. 2. Tolerance of Dominant Wavelength : 0.1nm. 3. Tolerance of Luminous Intensity : 15%. Directivity Radiation T = 25C unless otherwise noted A Relative Luminous Intensity vs. Radiation Angle Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision D 08/15 Phone: (949) 951-8808 Fax: (949) 951-3974 Web: www.bivar.com Page 2 of 4