TO-10-030 Bivar

REV. DESCRIPTION DATE APPROVED C Updated Part Thickness Offered 09/08/10 T. Y. Corrected TO-13 OD Typo D 07/03/12 T. Y. E Added Figure H 07/18/12 T. Y. F Removed Part Numbers from Part Offering, Table 1 07/01/14 J. C. G Removed Part Numbers, See Page 2 03/06/15 J. C. Add Part Number, See Page 2 H 03/31/15 J. C. J Engineering Update w/o Changes 05/13/16 J. C. Corrected Typo Dimensions on Page 2 & 3 K 07/29/16 J. C. R O.D. O.D. O.D. O.D. O.D. I.D. I.D. L L C/C I.D. CAVITY S.W. L S.W. DIA. S W W W CAVITY . THICKNESS S.D R S.D. SQ. DEPTH FIG. A FIG. B FIG. C FIG. D FIG. E FIG. F FIG. G FIG. H TABLE 1 EXAMPLE: SUFFIX I.D. I.D. DESCRIPTION NOTES TO-200-100E NONE Wax Offered for all part numbers. Suffix I.D. (see Table 1) E Effervescent Offered for all part numbers. Part Thickness CR Color Removed Offered for all part numbers. DR Detergent Removed Offered for all part numbers. TO Style H Salt Not offered for P/Ns: TO-10, TO-11, TO-64, TO-65, TO-68. Series XH Extra Hard Not offered for P/Ns: TO-10, TO-11, TO-64, TO-65, TO-68. STANDARD TOLERANCE ( UNLESS OTHERWISE SPECIFIED ) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 .X .1 X 1 TEL: (949) 951-8808 FAX: (949) 951-3974 .XX .01 TITLE: DISS-O-PADS, .XXX .005 WASH-AWAY SPACERS DESIGNED: DATE: REVISION: PART NO: D. Green 10/15/03 TO-XXX-XXX K CHECKED: DATE: SHEET 1 OF 3 CAGE CODE : 32559 M. Chen 10/15/03 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING.REV DESCRIPTION DATE APPROVED SEE SHEET 1 TO-5 PART NO. I.D. O.D. THICKNESS FIG. TO-5 TO-5 .225 (5.7mm) .375 (9.5mm) .030, .040, .050, .060, .070, .085, .090, .100, .120, .130, .150, .170, .200 A Spacer TO-6 .250 (6.4mm) .375 (9.5mm) .030, .040, .050, .060, .070, .090, .100, .120, .130, .150, .160, .180, .190 A I.C. Spacer TO-9 .300 (7.6mm) .437 (11.1mm) .030, .040, .050, .070, .080, .090, .100, .120, .130, .150, .180, .200 A - TO-13 .225 (5.7mm) .310 (7.9mm) .030, .040, .050, .060, .070, .080, .090, .100, .120, .130, .150 A Epoxy Case TO-18 PART NO. I.D. O.D. CAVITY DIA. CAVITY DEPTH THICKNESS FIG. TO-18 TO-12 .125 (3.2mm) .310 (7.9mm) .215 (5.5mm) .065 (1.7mm) .080, .090, .100, .120, .130, .180 B .250 (6.4mm) L.S. TO-16 .125 (3.2mm) .205 (5.2mm) - - .030, .040, .045, .050, .060, .070, .080, .090, .100, .120, .130, .150, .175, .200 A Epoxy Case TO-17 .170 (4.3mm) .250 (6.4mm) - - .030, .035, .040, .050, .060, .070, .090, .100, .120, .130, .140, .150, .170, .180, .200 A Thin Walls TO-18 .125 (3.2mm) .250 (6.4mm) -- .030, .040, .045, .050, .055, .060, .070, .080, .090, .100, .120, .125, .130, .150, .170, .190, .200, .250 A Standard TO-20 .125 (3.2mm) .290 (7.4mm) .200 (5.1mm) .065 (1.7mm) .070, .090, .100, .120, .130, .150 B .200 (5.1mm) L.S. TO-27 .125 (3.2mm) .290 (7.4mm) -- .030, .040, .050, .060, .070, .090, .100, .120, .130 A Heavy Walls AXIAL PART NO. I.D. O.D. THICKNESS SLOT DEPTH SLOT WIDTH FIG. TO-21 .125 (3.2mm) .250 (6.4mm) .050, .070, .080, .090, .100, .120, .130, .150, .170, .200, .230, .250 .045 (1.1mm) .060 (1.5mm) C TO-35 - .440 (11.2mm) .100, .120, .130, .140, .150, .170, .180, .190, .220, .230, .250 .065 (1.7mm) .230 (5.8mm) H TO-36 - .187 (4.7mm) .050, .060, .070, .080, .090, .100, .120, .130, .150 .040 (1.0mm) .080 (2.0mm) H TO-37 - .156 (4.0mm) .050, .070, .080, .090, .100, .120 .025 (.64mm) .050 (1.3mm) H ON-END/CORDWOOD PART NO. I.D. O.D. CAVITY DIA. CAVITY DEPTH THICKNESS FIG. TO-7 .075 (1.9mm) .175 (4.4mm) - - .030, .040, .050, .060, .070, .090, .100, .120, .130, .150, .180, .210 A TO-8 .062 (1.6mm) .156 (4.0mm) - - .030, .035, .040, .050, .055, .060, .065, .070, .080, .085, .090, .100, .105, .120, .130, .150, .160, .190, .200, .210 A TO-10 .040 (1.0mm) .085 (2.2mm) - - .025, .030, .040, .050, .060, .065, .070, .080, .090, .100 A TO-11 .045 (1.1mm) .100 (2.5mm) - - .030, .040, .050, .060, .070, .080, .100, .110, .120 A TO-26 .070 (1.8mm) .187 (4.7mm) - - .030, .040, .050, .060, .070, .090, .100, .120, .125, .150 A TO-40 .045 (1.1mm) .156 (4.0mm) - - .030, .040, .050, .060, .070, .080, .090, .100, .120, .130, .150, .160 A TO-64 .045 (1.1mm) .140 (3.6mm) - - .030, .035, .040, .050, .060, .070, .090, .100, .120, .125, .130, .140, .150, .160, .175 A TO-65 .075 (1.9mm) .140 (3.6mm) - - .030, .035, .040, .045, .050, .060, .070, .080, .090, .100, .120, .125, .130, .150, .175 A TO-67 .045 (1.1mm) .140 (3.6mm) .090 (2.3mm) .025 (.64mm) .050, .055, .060, .070, .090, .100, .120, .130 B TO-68 .045 (1.1mm) .110 (2.8mm) .075 (1.9mm) .025 (.64mm) .040, .050, .055, .060, .070, .090, .100, .120, .130, .150, .160 B SOLID PART NO. I.D. O.D. THICKNESS FIG. STANDARD TOLERANCE ( UNLESS OTHERWISE SPECIFIED ) TO-29 .040, .050, .060, .070, .090, .100, .120, .130 D - .156 (4.0mm) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 TO-31 - .125 (3.2mm) .040, .050, .060, .070, .090, .100, .120, .130 D .X .1 X 1 TEL: (949) 951-8808 FAX: (949) 951-3974 .XX .01 TO-32 - .187 (4.7mm) .030, .040, .050, .060, .070, .080, .090, .100, .120, .130 D TITLE: DISS-O-PADS, .XXX .005 WASH-AWAY SPACERS TO-33 - .250 (6.4mm) .030, .040, .050, .060, .070, .080, .090, .100, .120, .130 D DESIGNED: DATE: REVISION: PART NO: TO-34 - .375 (9.5mm) .040, .050, .060, .070, .090, .100, .120, .130, .250 D D. Green 10/15/03 TO-XXX-XXX K CHECKED: DATE: CAGE CODE : 32559 SHEET 2 OF 3 M. Chen 10/15/03 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING.