Tight Tolerance Ultraviolet LED Lamp TZ Series (T1, 3mm Round / 15 & 30) UV3TZ-XXX-XX RoHS Compliant Low Power Consumption Low Current Requirement High Efficiency Tight Tolerance of Wavelengths Equipped with a Protective Zener Diode Built-in Bivar UV3TZ-XXX-XX Tight Tolerance Ultraviolet (UV) LEDs have peak wavelengths in the highly desirable ranges from 385 to 405nm with a tight tolerance of +/-2.5nm. These UV LEDs also have a built-in Zener Di- ode providing protective circuit against electrostatic discharge (ESD). Applications: Industrial curing, fluorescence disclosing and verification, air purification, medical and biomedi- cal applications, dermatological equipment, and hazardous materials detection. Part Number Chip Material Emitted Color Peak Wavelength Lens Color Viewing Angle UV3TZ-385-15 385nm UV3TZ-390-15 390nm UV3TZ-395-15 395nmInGaN/Sapphire Purple Water Clear 15 UV3TZ-400-15 400nm UV3TZ-405-15 405nm UV3TZ-385-30 385nm UV3TZ-390-30 390nm UV3TZ-395-30 395nmInGaN/Sapphire Purple Water Clear 30 UV3TZ-400-30 400nm UV3TZ-405-30 405nm Outline Drawings Notes: 1. All dimensions are in inches millimeters . 2. Standard tolerance: 0.010 unless otherwise noted. 3. Tolerance of overall epoxy outline: 0.020 unless otherwise noted. 4. Epoxy meniscus may extend to 0.060 max. This UV (ultraviolet) LED during operation radiates intense UV light. Do not look directly into the UV light during operation of device. This can be harmful to human body especially to the eyes and ATTENTION skin, even for brief period due to the intense UV light. OBSERVE PRECAUTIONS If viewing the UV light is necessary, please use UV filtered glasses to avoid damage by the UV light. FOR HANDLING If the UV LED in your product might be viewed directly, please affix a caution label to your product to that effect. ELECTROSTATIC SENSITIVE DEVICES Avoid direct eye and skin exposure to UV light. Keep out of reach of children. Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision D 10/15 Phone: (949) 951-8808 Fax: (949) 951-3974 Web: www.bivar.com Page 1 of 4 Tight Tolerance Ultraviolet LED Lamp UV3TZ-XXX-XX Absolute Maximum Ratings T = 25C unless otherwise noted A Power Dissipation 120 mW Forward Current ( DC ) 20 mA 1 Peak Forward Current 100 mA Electrostatic Discharge ( Class1 ) 2000 V Reverse Voltage V Operating Temperature Range -25 ~ +80C Storage Temperature Range -30 ~ +80C 2 Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 260C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics T = 25C & I = 20 mA unless otherwise noted A F Recommend Reverse Forward Peak Wavelength Emitting 50% Power Forward Current 1 2 Voltage (V) p (nm) Power (mW) Angle (deg) Part Number Current (mA) (mA) 3 MIN TYP MAX MIN TYP MAX MAX MIN TYP MAX MIN TYP TYP UV3TZ-385-15 3.2 3.4 3.6 382.5 385.0 387.5 10 20 UV3TZ-390-15 387.53.2 3.4 3.6 390.0 392.5 10 20 UV3TZ-395-15 392.53.1 3.3 3.5 395.0 397.5 10 20 10 15 20 100 15 UV3TZ-400-15 397.53.1 3.3 3.5 400.0 402.5 10 20 UV3TZ-405-15 402.5 405.0 407.5 3.1 3.3 3.5 10 20 UV3TZ-385-30 3.2 3.4 3.6 382.5 385.0 387.5 10 20 UV3TZ-390-30 387.53.2 3.4 3.6 390.0 392.5 20 40 UV3TZ-395-30 392.53.1 3.3 3.5 10 15 20 100 395.0 397.5 20 40 30 UV3TZ-400-30 397.53.1 3.3 3.5 400.0 402.5 20 40 UV3TZ-405-30 402.53.1 3.3 3.5 405.0 407.5 20 40 Notes: 1. Tolerance of forward voltage : 0.05V. 2. Tolerance of peak wavelength : 1.0nm. 3. Tolerance of emitting power (Typ) : 15%. Directivity Radiation Relative Luminous Intensity vs. Radiation Angle T = 25C unless otherwise noted A (15 Viewing Angle) (30 Viewing Angle) Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision D 10/15 Phone: (949) 951-8808 Fax: (949) 951-3974 Web: www.bivar.com Page 2 of 4