Architect and Engineer Specifications BOGEN MICROPHONES HDU250 - The microphone shall be a Bogen Model HDU250. GCU250 - The microphone shall be a Bogen Model GCU250. It shall Models HDU250, HDU150, HDO100, MBS1000A, DDU250, GCU250, GDU150, It shall be a cardioid, dynamic handheld microphone with a frequency be a cardioid, back electret condenser gooseneck microphone with a response of 50 Hz to 18 kHz and a 250-ohm impedance. The sensi- frequency response of 50 Hz to 18 kHz and a 250-ohm impedance. MGN19, SCU250, WCU250 tivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater The sensitivity shall be -65 dB (+/- 3dB) and the signal-to-noise ratio than 65 dB. It shall have a sliding-type on/off switch and a rubberized greater than 65 dB. Max SPL 1% THD shall be greater than 130 dB. black finish. The HDU250 shall have an XLR Male connector. It shall have a non-glare black finish. The GCU250 shall have an XLR Introduction Dimensions shall be 7 D x 2 Dia. Weight shall be 13 oz. male type connector. It requires an external 9V - 52V DC phantom 1 power source. Dimensions shall be 18- /2 L. Weight shall be 4 ounces. Bogens line of microphones come in a variety of types and styles (handheld, desktop, gooseneck, boundary, and overhead hanging) to meet any HDU150 - The microphone shall be a Bogen Model HDU150. and all application needs ranging from paging systems to instrument and vocal reproduction. Each is ruggedly constructed to withstand the It shall be a cardioid, dynamic handheld microphone with a frequency GDU150 - The microphone shall be a Bogen Model GDU150. It shall demands of sound installations. response of 70 Hz to 15 kHz and a 500-ohm impedance. The sensi- be a cardioid, dynamic gooseneck microphone with a frequency tivity shall be -70 dB (+/- 3dB) and the signal-to-noise ratio greater response of 100 Hz to 12 kHz and a 500-ohm impedance. The sensi- Each microphone provides clear, natural, intelligible sound reproduction with accurate response and dependable performance. Bogens than 65 dB. It shall have a sliding-type on/off switch and a rubberized tivity shall be -75 dB (+/- 3dB) and the signal-to-noise ratio greater microphone models are crafted with professional-grade features, including models with rubberized grips quiet on/off glide switches dent-proof black finish. The HDU150 shall have an XLR Male connector. than 65 dB. It shall have a push-on/push-off talk switch mounted on its screens contemporary designs and a variety of accessories including stands, mounting clips, windscreens, and cables. 1 1 Dimensions shall be 6- /2 D x 1- /2 Dia. Weight shall be 13 oz. base and a non-glare black finish. The GDU150 shall have an XLR Male 3 type connector. Dimensions shall be 16- /4 L. Weight shall be 11 oz. Index HDO100 - The microphone shall be a Bogen Model HDO100. It shall be an omni-directional, dynamic handheld microphone with a MGN19 - The microphone shall be a Bogen Model MGN19 dynam- Handhelds (HDU250, HDU150, HDO100)..............................................................................................................................................................1-2 frequency response of 70 Hz to 15 kHz and a 500-ohm impedance. The ic-type, omni-directional microphone. Frequency response shall be Desktops (MBS1000A, DDU250) ..............................................................................................................................................................................3 sensitivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater uniform from 50 Hz to 12 kHz, with a presence boost at 2 kHz for Goosenecks (GDU250, GCU150, MGN19) ............................................................................................................................................................4-5 than 65 dB. It shall have a silent on/off lockable reed switch and a rub- natural, intelligible sound. Impedance shall be 400 ohms. A sealed Boundary (SCU250) ......................................................................................................................................................................................................6 berized black finish. The HDO100 shall have an XLR Male connector. push-to-talk microswitch shall be mounted on the microphone hous- Overhead (WCU250)....................................................................................................................................................................................................6 1 1 Dimensions shall be 6- /2 D x 1- /2 Dia. Weight shall be 13 oz. ing. The sensitivity shall be -76 dB (+/- 3dB). The microphone shall be Accessories ......................................................................................................................................................................................................................7 furnished with a 19 chrome-plated flexible gooseneck and mounting Architect and Engineer Specifications ........................................................................................................................................................................8 MBS1000A - The microphone shall be a Bogen Model MBS1000A. flange and seven feet of rugged synthetic-jacketed 4-conductor, It shall be a dynamic-type, cardioid, dual-impedance desktop micro- 2-shielded cable. The microphone shall have a black plastic cap and phone. The frequency response shall be uniform from 45 Hz to 5 housing with chrome-plated screen and shall measure 4- /8 long with HDU250 - Professional Stage 15 kHz. Impedance shall be selected via a switch on the underside of 3 a maximum diameter of 1- /8 . Removable set screws shall secure the the microphone base. Impedances shall be 500 ohms (matching 125 Description Specifications front cap to the microphone and the microphone to the gooseneck. ohms to 1,000 ohms) or 50,000 ohms (matching 50k ohms or 1 1 Dimensions shall be 23- /2 L. Weight shall be 1- /4 lb. The HDU250 is a dynamic microphone MIC Type: Handheld greater). Voltage output shall be -72 dB at Lo-Z, and -52 dB at Hi-Z. ideal for acoustically-demanding envi- Element: Moving coil dynamic The microphone shall provide push-to-talk and lift-to-talk operation. SCU250 - The microphone shall be a Bogen Model SCU250. It shall ronments. It features a heavy zinc die Polar Pattern: Cardioid The push-to-talk bar shall include a locking mechanism. Provision shall be a cardioid, back electret condenser boundary microphone with a cast case with a rigid, low noise cable- Impedance: 250-ohm be included to defeat lift-to-talk operation. The microphone and relay frequency response of 20 Hz to 18 kHz and a 250-ohm impedance. mount system and a lockable silent reed Frequency Response: 50 Hz to 18 kHz switching shall be accomplished with long life DPDT professional leaf The sensitivity shall be -58 dB (+/- 3dB) and the signal-to-noise ratio switch. It has an extra low handling Sensitivity*: -72 dB +/- 3dB switches. The microphone circuit shall be wired normally open. The greater than 65 dB. It shall have a matte black finish and will require noise, floating, shock-mounted S/N Ratio: >65 dB microphone shall be in an ABS plastic case with a rubberized black fin- an external 9V - 52V DC phantom power source. It shall have a male Neodymium capsule. Connector: XLR Male 3 3 1 ish and a die-cast base. It shall be supplied with 7 feet of 4-conductor XLR connector. Dimensions shall be 2- /4 W x /4 H x 3- /4 D. Weight Switch: With sliding-type on/off switch cable, 2 conductors individually shielded, and shall be permanently shall be 11 oz. Features 3 3 (lockable, silent reed switch) wired into the microphone. Dimensions shall be 4- /8 W x 9- /8 H WCU250 - The microphone shall be a Bogen Model WCU250 hang- 7 1 Cardioid pickup pattern Dimensions: 7 D x 2 Dia. x 5- /8 D. Weight shall be 1- /4 lb. ing microphone. It shall be a cardioid, back electret condenser micro- High sensitivity Neodymium capsule Product Weight: 13 oz. DDU250 - The microphone shall be a Bogen Model DDU250. It shall phone with a frequency response of 50 Hz to 18 kHz and a 250-ohm High output design with excellent gain before feedback Material: Zinc die cast be a cardioid, dynamic desktop microphone with a frequency response impedance. The sensitivity shall be -65 dB (+/- 3dB) and the signal-to- characteristics Finish: Rubberized black finish of 100 Hz to 12 kHz and a 500-ohm impedance. The sensitivity shall be noise ratio greater than 65 dB. It shall have a matte black finish and will High sound pressure capability without distortion and low * (0dB=1V/ BAR 1,000 Hz indicated by open circuit) -76 dB (+/- 3dB) and the signal-to-noise ratio greater than 65 dB. require an external 9V - 52V DC phantom power source with a con- sensitivity to breath/pop noise It shall have a push-to-lock/push-to-talk switch and a matte black finish. necting cable of 20 . It shall have a female mini-XLR connector with a Efficient shock-mount system reduces handling and cable noise It shall have a 10 , 4-conductor, 2-shielded cable. Dimensions shall be mini-XLR to standard XLR (male) adapter. Dimensions shall be Rugged, reliable construction 1 1 1 1 1 1 4- /4 W x 18- /4 H x 6- /4 D. Weight shall be 3- /2 lb. 1- /4 D x /2 dia. Weight shall be 5 ounces. Integral multi-layer breath/wind filter Polar Graph Low-impedance operation Lockable, silent on/off reed switch Includes mic clip Frequency Response Graph 54-5090-01G 1301 50 Spring Street, Ramsey, NJ 07446 U.S.A. 2003 Bogen Communications, Inc. Tel. 201-934-8500 Fax: 201-934-9832 Specifications subject to change without notice. www.bogen.com Accessories HDO100 - Public Address HDU150 - Handheld Stage Description Description CABLES MOUNTS The HDU150 is an attractive, dynamic, all- The HDO100 is an attractive, purpose microphone ideally suited for a dynamic microphone perfectly-suited MAC - Microphone Cable Assembly MSM - Shock-Isolated Microphone Base wide variety of vocal and sound reinforce- for public address applications and ment applications. For handheld models For GCU250 and GDU 150 instrument sound reproduction. Female XLR to stripped and tinned wires Provides superior mechanical noise and vibration isolation Features Features 25 cable Lightweight ABS material housing Cardioid pickup pattern 2-conductor plus shield XLR (female) connector Omni-directional pickup pattern Crisp, clear sound 1 lb. Thick shock-absorbing rubber cushion Uniform pickup of sound from all directions with no Wide dynamic range with high-end sparkle and minimum Ideal fixture for boardrooms, conference rooms, pulpits, deterioration in frequency response feedback podiums, and newsrooms XLR25 - Microphone Cable Clean, clear reproduction with minimal ambient sound 3 3 Rigid, low noise cable-mount system 4- /4 W x 1- /4 H x 4 D, 6 ounces Low sensitivity to handling noise and stage vibrations For handheld models Low sensitivity to breath and popping sounds Rugged, reliable construction Male XLR to female XLR Durable ball-shaped design Internal rubber shock isolation system 25 cable STANDS Rubber shock-mount system for attenuation of handling and Lockable, silent on/off reed switch 2-conductor plus shield cable noise Includes mic clip 12 oz. DS3 - Desk Stand Lockable, silent on/off reed switch Specifications Includes mic clip 3 chrome-finish tube, 4 high with base CLIPS MIC Type: Handheld 6 diameter cast iron base, 3 lb. Specifications Element: Moving coil dynamic MIC Type: Handheld Polar Pattern: Omni-directional MC27 - Handheld Clip SF4 Floor Stand Element: Moving coil dynamic Impedance: 500-ohm For handheld models 34 to 62 adjustable height Polar Pattern: Cardioid Frequency Response: 70 Hz to 15 kHz Black, flexible, impact-resistant plastic Round 10 diameter die cast base, 9 lb. Impedance: 500-ohm Sensitivity*: -72 dB +/- 3dB Grip-action clutch and chrome-plated tubing Frequency Response: 70 Hz to 15 kHz S/N Ratio: >65 dB Sensitivity*: -70 dB +/- 3dB WINDSCREENS Connector: XLR Male S/N Ratio: >65 dB SB6 - Floor Boom Stand Switch: With silent on/off switch Connector: XLR Male WSGCU250 - Windscreen for GCU250 (lockable, silent reed switch) Telescopic floor stand 1 1 Switch: With sliding-type on/off switch Dimensions: 6- /2 D x 1- /2 Dia. Sliding 30 boom arm Foam windscreen for use with GCU250 microphone (lockable, silent reed switch) Product Weight: 13 oz. 1 1 34 to 62 adjustable height, 6 lb. Dimensions: 6- /2 D x 1- /2 Dia. Material: Zinc die cast Chrome-plated tubing Product Weight: 13 oz. Finish: Rubberized black finish Tripod base Material: Zinc die cast * (0dB=1V/ BAR 1,000 Hz indicated by open circuit) Finish: Rubberized black finish * (0dB=1V/ BAR 1,000 Hz indicated by open circuit) MC27 WSGCU250 Polar Graph Polar Graph MSM Frequency Response Graph Frequency Response Graph MAC SB6 XLR25 SF4 DS3 7 2