BOSCH SCHMELZKLEBER TRANSPARENT Bosch

Material Safety Data Sheet according to 91/155/EEC - ISO 11014-1 Page 1 of 4 SDS no. : 43778 V001.4 CX 124 Bosch 1609201396 Revision: 30.06.2003 printing date: 09.10.2007 1. Identification of the substance/preparation and of the company/undertaking Trade name: CX 124 Bosch 1609201396 Intended use: assembly adhesive Company name: Henkel KGaA Henkelstr. 67 40191 Dsseldorf Phone: +49 (211) 797-0 Fax-no.: Emergency information: The Henkel information service also provides an around-the-clock telephone service on phone no.++49-(0)211- 797-3350 for exceptional cases. 2. Composition / information on ingredients General chemical description: Hotmelt adhesive Base substances of preparation: Ethylene-vinyl acetate copolymer Declaration of ingredients: Contains no dangerous substances exeeding the limits of the EU-Directive 3. Possible product risks The product is not hazardous within the meaning of the valid (EU) preparation guideline. 4. First-aid measures General information: If unconscious place securely on one side and inform emergency services. After inhalation: Fresh air, oxygen supply, warmth seek medical advice if symptoms persist. MSDS-No.: 43778 CX 124 Bosch 1609201396 Page 2 of 4 V001.4 After skin contact: After contact with the hot melt: cool with water, seek medical advice After eye contact: After contact with the hot melt: cool with water, seek medical advice After ingestion: Rinse the mouth. Drink 1-2 glasses of water. If adverse health effects persist seek medical advice. 5. Fire-fighting measures Suitable extinguishing media: All common extinguishing agents are suitable. Extinguishing media which must not be used for safety reasons: High pressure waterjet Special protection equipment for fire-fighters: Wear self-contained breathing apparatus. Combustion products or gases to be formed: carbon monoxide 6. Accidental release measures Personal precautions: Not necessary. Environmental precautions: Do not empty into drains / surface water / ground water. Process for cleaning and take-up: Allow to solidify. Remove mechanically. 7. Handling and storage Handling: Ensure that workrooms are adequately ventilated. Storage: Ensure good ventilation/extraction. Store in a cool, dry place. 8. Exposure controls / personal protection Components with specific control parameters for workplace: none Additional information for system design: Ensure good ventilation/suction at the workplace. Hand protection: Wear refractive gloves while working with the hot melt. Eye protection: Protective goggles