236 M 236 M 836 C 836 C 836 C 836 C 100 3223W 100 3223W 3223W 100 Features n Meets EIA/EIAJ/IPC/VECI SMD standard n Surface Mount 3 mm Square / Multiturn trimmer footprint Cermet / Industrial / Sealed n Top and side adjust n Sealed to withstand standard board wash processing n RoHS compliant* - see processing information on RoHS compliant surface old 3223w n Pick and place centering design for old 3223w mount trimmers automated placement compatibility 0.36 0.36 n For trimmer applications/processing 3.9 3.9 n Flush adjustment screw 3.18 3.18 (.014) (.014) (.154) (.154) guidelines, click here (.125) (.125) 1 1 3223 - 3 mm SMD Trimpot Trimming Potentiometer 2 2 3.9 3.9 (.154) (.154) 3 3 0.13 0.13 Electrical Characteristics Product Dimensions (.005) (.005) Standard Resistance Range ELECTRICAL ADJUSTMENT SLOT ELECTRICAL ADJUSTMENT SLOT 0.38 0.38 0.30 0.30 ......................10 ohms to 2 megohms 3223J Side 3223J Side AdjustAdjust 3223G Side 3223G Side AdjustAdjust WIDE WIDE X X DEEP DEEP 0.23 0.23 (0.014) (0.014) (0.011) (0.011) 0.40 0.40 3.96 3.96 3.18 3.18 3.18 3.96 3.96 3.18 (.009) (.009) (see standard resistance table) (.016) (.016) (.156) (.156) (.125) (.125) (.125) (.156) (.156) (.125) Resistance Tolerance ........... 20 % std. 1 1 1 1 Absolute Minimum Resistance 0.81 0.81 ........................... 1 % or 3 ohms max. 2 2 4.0 2 2 4.0 (.032) (.032) 4.0 4.0 (.158) (.158) (.158) (.158) (whichever is greater) 3 3 3 3 1.01 1.01 Contact Resistance Variation (.040) (.040) RECOMMENDED LAND PATTERNRECOMMENDED LAND PATTERN 2.43 ........................... 3 % or 3 ohms max. ELECTRICAL ADJUSTMENT SLOTELECTRICAL ADJUSTMENT SLOT ELECTRICAL ADJUSTMENT SLOT 2.43 ELECTRICAL ADJUSTMENT SLOT 0.38 0.38 0.30 0.38 (.096) 1.6 1.6 0.30 0.38 0.30 (.096) 0.30 WIDE (whichever is greater) WIDE X XDEEP DEEP WIDE WIDE X X DEEP DEEP (0.014) (.063) (0.014) (0.011) (0.011) (0.014) (0.014) (.063) (0.011) (0.011) LEAD 2.77 2.77 LEAD Resolution ................. Essentially infinite 0.72 0.72 0.77 0.990.77 0.99 FOOTPRINT 0.62 0.62 FOOTPRINT (.109) (.109) REF. Insulation Resistance ...............500 VDC (.028) (.030) (.039) REF. (.028) (.024) (.030) (.039) 2 PLCS. 2 PLCS. (.024) 2.77 2.77 2.8 2.80.9 0.9 0.13 100 megohms min. 0.13 (.109) (.109) (.110) (.110)(.035) (.035) (.005) (.005) 0.13 1.3 0.13 1.3 Dielectric Strength 1.3 1.3 (.005) (.005) (.051) (.051) Sea Level.............. 600 VAC (1 minute) (.051) (.051) 0.99 0.3 0.3 0.99 1.4 1.4 Adjustment Angle .............11 turns nom. (.012) (.012)(.039) (.039) (.055) (.055) 0.88 0.78 0.78 0.88 0.3 0.56 0.3 0.56 4.47 4.47 Environmental Characteristics (.031) (.035) (.035) (.031) (.012) (.012) (.022) (.022) (.176) (.176) 1.25 1.25 1.25 1.25 5.32 5.32 0.56 0.56 (.049) (.049) (.049) Power Rating (200 volts max.) (.049) (.209) (.209) RECOMMENDED LAND PATTERN RECOMMENDED LAND PATTERN (.022) (.022) 70 C ..................................0.125 watt 2 PLCS. 2 PLCS. RECOMMENDED LAND PATTERNRECOMMENDED LAND PATTERN 0.9 0.9 4.0 150 C .......................................0 watt 4.0 1.4 1.4 (.035) (.035) (.157) 2 PLCS. (.157) LEAD 2 PLCS. LEAD (.055) (.055) Temperature Range ...-65 C to +150 C 0.9 0.9 FOOTPRINT FOOTPRINT 4.4 4.4 1.4 1.4 REF. REF. (.035) (.035) Temperature Coefficient ... 100 ppm/C (.173) (.173) LEAD LEAD (.055) (.055) 2.8 2.8 FOOTPRINT Seal Test ..85 C Fluorinert /60 seconds FOOTPRINT (.110) (.110) REF. REF. 1.3 1.3 Humidity .......MIL-STD-202 Method 106 2.8 2.8 (.051) (.051) (.110) (.110) 1.6 1.6 1.6 1.6 TRS 3 % IR 10 megohms 1.3 1.3 T0737 PCN version, not used:T0737 PCN version, not used: (.063) (.063) (.063) (.063) (.051) Vibration .....20 G TRS 1 % VRS 1 % (.051) 2.0 2.0 2.0 2.0 Shock .......100 G TRS 1 % VRS 1 % (.079) (.079) (.079) (.079) Load Life 3223W 3223W Top AdjustTop Adjust 2.31 2.31 3223W T3223W Top Adjustop Adjust 4.1 4.1 (.090) (.090) ........ 70 C rated power 1000 hours MM 0.56 0.56 (0.161) (0.161) 3.96 3.96 DIMENSIONS: 1.96 3.18 1.96 3.18 (0.022) (0.022) (INCHES) CRV ............................. 4 ohms or 4 % (.156) 3.9 3.9 (.156) (.077) (.077) (0.125) (0.125) 2 PLCS. 2 PLCS. 0.98 0.98 (0.153) (0.153) (whichever is greater) 0.25 (0.039) 3 (0.039) 3 TOLERANCES: EXCEPT WHERE NOTED 2 2 Rotational Cycling .................200 cycles 1 (.010) 1 4.0 4.0 100 100 1.97 1.97 CRV ............................. 4 ohms or 4 % (.158) (.158) 2 2 3223W (0.077) (0.077)3223W (whichever is greater) WIPER 1 1 2 0.98 0.98 3 3 Thermal Shock ..........................5 cycles (.039) (.039) 2.76 3.18 2.76 3.18 ELECTRICAL ELECTRICAL CW (.125) CCW 3 TRS 2 % VRS 2 % (.109) (.109) (.125) 1 ADJUSTMENT SLOTADJUSTMENT SLOT 2.76 0.56 ELEC. ADJ. SLOTELEC. ADJ. SLOT2.76 0.38 0.38 0.56 2.31 2.31 0.30 0.30 ESD Classification ................................ 2 WIDE 2 PLCS. CLOCKWISE WIDE X X 2 PLCSDEEP . DEEP 0.38 0.38 (0.109) (0.109) (0.014) (.022) (.022) (0.090) (0.014) (0.011) (0.090) (0.011) WIDE X WIDE X 3.9 3.9 (0.014) (0.014) Physical Characteristics (0.153) 0.30 0.30 (0.153) RECOMMENDED LAND PATTERN DEEP RECOMMENDED LAND PATTERN DEEP (0.011) (0.011) 0.76 0.76 How To Order Mechanical Stop ..................Wiper idles 2.44 2.44 (.030) (.030) RECOMMENDED LAND PATTERNRECOMMENDED LAND PATTERN Torque ............................2.50 oz-in. max (.096) (.096) 3223 W - 1 - 502 E REF. REF. 4.34 4.34 3.52 3.52 1.3 1.3 1.3 1.3 Weight ...............Approximately 0.01 oz. 0.13 0.13 (.171) (.171) (0.139) (0.139) 1.27 1.27 2.43 (0.051)2.43 (0.051)(0.051) (0.051) Model (.005) (.005) Marking Manufacturers code, (.050) (.050) (0.096) (0.096) Style resistance code and date code 2.79 2.79 4.16 4.16 (.110) (.110) 1.00 1.00 Solderability ...............Per MIL-STD-202, (0.164) Standard Product Indicator (0.164) 1.27 1.27 (.039) (.039) Method 208 0.76 0.76 -1 = IR Reflow (Standard) (.050) 2 PLCS. 2 PLCS. (.050) 0.89 (.030) 0.89 (.030) Wiper ...............50 % (Actual TR) 10 % 1.55 2.8 2.8 1.55 Resistance Code 1.00 (.035) (.035) 2 PLCS. 2 PLCS. 1.00 1.6 1.6 3.43 3.43 (.061) (0.110) (.061) (0.110) Flammability .............................UL94V-0 2 PLCS. 2 PLCS. (.039) (.039) (0.063) (0.063) 0.81 0.810.63 0.63 (.135) (.135) Embossed Tape Designator 0.9 0.9 2 PLCS. 2 PLCS. (0.032) (0.032)(0.025) (0.025) Adjustment Tool .......................... H-92-1 (0.035) (0.035) E = 500 pcs./7 Reel (Standard) 0.22 0.22 2 PLCS. 2 PLCS. REF. REF. (0.009) (0.009) Tape and reel material meets Antistatic ANSI/ ESD 5541-2003 packaging standards. WARNING Cancer and Reproductive Harm Specifications are subject to change without notice. www.P65Warnings.ca.gov Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Fluorinert is a registered trademark of 3M Co. of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 836 C 836 C 100 3223J 100 3223J 100 3223G 100 3223G 103 2FM 103 2FM 100 3223W 100 3223W 839C 236 M 236 M236 M 236 M 236 M 236 M 236 M 236 M 236 M 236 M 6.35 MAX. (.250) .04 MAX. (.002) 5.64 4.81 MAX. MAX. (.222) 4.5 0.1 (.189) (.177 .004) .04 MAX. 12.00 .30 (.002) (.472 .012) 5.5 .05 4.05 (.217 .002) MAX. (.159) 5.3 0.1 1.75 .10 (.069 .004) (.209 .004) 12.00 .30 1.5 + .10/ .00 (.472 .012) 5.5 .05 (.059 + .004/ .000) (.217 .002) DIA. 1.75 .10 1.5 (.069 .004) MIN. 2.00 .05 (.059) (.079 .002) 1.5 + .10/ .00 4.00 .10 8.00 .10 (.059 + .004/ .000) (.157 .004) (.315 .004) DIA. 1.5 MIN. 2.00 .05 (.059) 3.85 .10 (.079 .002) (.152 .004) 4.00 .10 (.157 .004) 4.26 .10 8.00 .10 (.168 .004) (.315 .004) TAPE 1.78 .25 EQUAL SPACED (.070 .010) 3 PLCS. 21.01 .79 3223 - 3 mm SMD Trimpot Trimming Potentiometer DIA. 13.0 .51 DIA. (.827 .031) (.512 .020) 2.67 .25 (.105 .010) 6.35 MAX. Packaging Specifications Standard Resistance Table (.250) .04 MAX. Resistance Resistance (.002) 59.18 2.03 (Ohms) Code (2.330 .080) 10 100 4.75 5.64 4.81 MAX. MAX. MAX. 20 200 (.187) (.222) 4.5 0.1 (.189) 6.35 50 500 MAX. (.177 .004).04 .04 MAX. (.250) MAX. 100 101 (.002) (.002) 12.00 .30 200 201 .04 (.472 .012) 5.5 .05 MAX. 500 501 4.05 4.05 (.002) MAX. (.217 .002) MAX. 178 2.0 1,000 102 4.42 0.1 (.159) 5.3 0.1 1.75 .10 (.159) DIA. 2,000 202 (7.008 .079) (.174 .004) 5.64 (.069 .004) (.209 .004) 12.4 + 2.01/ -.000 4.81 MAX. MAX. 5,000 502 (.222) (.189) 4.5 0.1 (.488 + .079/ -.000) 12.00 .30 10,000 103 12.00 .30 (.177 .004) 1.5 + .10/ .00 .04 (.472 .012) 20,000 203 5.5 .05 (.472 .012) MAX. 5.5 .05 (.059 + .004/ .000) 12.00 .30 (.002) 50,000 503 REEL (.217 .002) (.217 .002) DIA. 1.75 .10 (.472 .012) 100,000 104 1.75 .10 5.5 .05 1.5 4.05 MIN. (.069 .004) (.069 .004) (.217 .002) MAX. 200,000 204 Cover tape peel strength: Meets EIA specification 481. 2.00 .05 (.059) 1.75 .10 (.159) 5.3 0.1 500,000 504 (.079 .002) (.209 .004) (.069 .004) 1,000,000 105 1.5 + .10/ .00 4.00 .101.5 + .10/ .00 8.00 .10 2,000,00012.00 .30 205 (.059 + .004/ .000) (.157 .004)(.059 + .004/ .000) (.315 .004) 1.5 + .10/ .00 (.472 .012) DIA. 5.5 .05 DIA. (.059 + .004/ .000) 1.5 Popular values listed in boldface. Consult factory 1.5 (.217 .002) MIN. MIN. 2.00 .05 2.00 .05 DIA. (.059) 1.75 .10 for special resistances. (.059) 3.85 .10 1.5 (.079 .002) (.079 .002) (.069 .004) MIN. (.152 .004) 2.00 .05 (.059) 4.00 .10 4.00 .10 (.079 .002) (.157 .004) (.157 .004) 1.5 + .10/ .00 4.00 .10 8.00 .10 (.059 + .004/ .000) (.157 .004) (.315 .004) 4.26 .10 DIA. 4.26 .10 8.00 .10 8.00 .10 1.5 (.168 .004) MIN. (.168 .004) 2.00 .05 (.315 .004) (.315 .004) (.059) 3.85 .10 (.079 .002) TAPE (.152 .004) 4.00 .10 (.157 .004) 1.78 .25 EQUAL SPACED (.070 .010) 3 PLCS. 4.26 .10 8.00 .10 (.168 .004) 21.01 .79 (.315 .004) 13.0 .51 DIA. DIA. (.827 .031) TAPE (.512 .020) 2.67 .25 (.105 .010) 6.35 MAX. (.250) 1.78 .25 EQUAL SPACED .04 (.070 .010) 3 PLCS. MAX. (.002) 21.01 .79 59.18 2.03 DIA. 13.0 .51 DIA. (.827 .031) 5.64 (2.330 .080) 4.81 (.512 .020) 2.67 .25 4.75 MAX. MAX. MAX. (.222) 4.5 0.1 (.189) (.187)(.105 .010) (.177 .004) .04 .04 MAX. MAX. 12.00 .30 (.002) (.002) (.472 .012) 5.5 .05 4.05 (.217 .002) 4.05 MAX. (.159)MAX. 5.3 0.159.18 2.03 1.75 .10 178 2.0 4.42 0.1 (.159) DIA. (2.330 .080) (.069 .004) (.209 .004) (7.008 .079) (.174 .004) 4.75 12.4 + 2.01/ -.000 MAX. (.187) 12.00 .30 (.488 + .079/ -.000) 1.5 + .10/ .00 12.00 .30 (.472 .012) 5.5 .05 .04 (.059 + .004/ .000) MAX. (.472 .012) 5.5 .05 (.217 .002) (.002) DIA. REEL 1.75 .10 (.217 .002) 1.5 1.75 .10 (.069 .004) MIN. 4.05 2.00 .05 (.059) MAX. (.069 .004) Cover tape peel strength: Meets EIA specification 481. 178 2.0 (.159) 4.42 0.1 (.079 .002) DIA. (7.008 .079) (.174 .004) 1.5 + .10/ .00 12.4 + 2.01/ -.000 4.00 .10 8.00 .10 1.5 + .10/ .00 (.059 + .004/ .000) (.157 .004) (.488 + .079/ -.000) (.315 .004) 12.00 .30 (.059 + .004/ .000) DIA. 1.5 (.472 .012) DIA. 5.5 .05 MIN. 2.00 .05 1.5 REEL (.059) 3.85 .10 (.217 .002) MIN. 2.00 .05 (.079 .002) 1.75 .10 (.059) (.152 .004) (.079 .002) 4.00 .10 (.069 .004) Cover tape peel strength: Meets EIA specification 481. 4.00 .10 (.157 .004) (.157 .004) 1.5 + .10/ .00 MM (.059 + .004/ .000) 4.26 .10 8.00 .10 DIMENSIONS: DIA. 4.26 .10 (.168 .004) (INCHES)8.00 .10 (.315 .004) 1.5 (.168 .004) MIN. 2.00 .05 (.315 .004) (.059) TAPE (.079 .002) 4.00 .10 REV. 04/20 (.157 .004) 1.78 .25 EQUAL SPACED Trimpot is a registered trademark of Bourns, Inc. (.070 .010) 3 PLCS. Specifications are subject to change without notice. 4.26 .10 Users should verify actual device performance in their specific applications. 8.00 .10 21.01 .79 DIA. (.168 .004) 13.0 .51 (.315 .004) The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. DIA. (.827 .031) (.512 .020) 2.67 .25 (.105 .010) 59.18 2.03 (2.330 .080) 4.75 MAX. (.187) .04 MAX. (.002) 4.05 MAX. 178 2.0 4.42 0.1 (.159) DIA. (7.008 .079) (.174 .004) 12.4 + 2.01/ -.000 (.488 + .079/ -.000) 12.00 .30 (.472 .012) 5.5 .05 REEL (.217 .002) 1.75 .10 (.069 .004) Cover tape peel strength: Meets EIA specification 481. 1.5 + .10/ .00 (.059 + .004/ .000) DIA. 1.5 MIN. 2.00 .05 (.059) (.079 .002) 4.00 .10 (.157 .004) 4.26 .10 8.00 .10 (.168 .004) (.315 .004) 100 100 3223J 3223G 100 100 3223J 3223G 100 100 3223J 3223G 100 100 3223J 3223G