Features Applications n Surface mount and through-hole versions n Volume control on audio equipment n 12 mm Square / Dustproof n Motion controllers n One million rotational cycles n Dishwasher control systems n Thin profile n Automotive temperature range n RoHS compliant* n AEC-Q200 compliant 3382 - 12 mm Rotary Position Sensor Electrical Characteristics Product Dimensions Standard Resistance Range 3382G 3382H 11.00 11.00 11.00 11.00 ............................... 2.5K to 100K ohms (.433) (0.433) 5.54 (.433) (0.433) 5.54 5.54 40 5.54 40 3.58 Resistance Tolerance ..............30 % std. (0.218) 3.58 2 2 (0.218) (.218) 40 2 2 (.218) 40 (.141) 3.58 3.58 (.141) Linearity ............................................2 % (.141) (.141) Resolution.................... Essentially infinite Insulation Resistance 500 VDC ............................... 100 megohms min. RESISTANCE CODE, RESISTANCE CODE, RESISTANCE CODE, PIN & SHAFT STYLE 6.50 RESISTANCE CODE, PIN & SHAFT STYLE 6.50 Dielectric Strength 103H-1 PIN & SHAFT STYLE DATE CODE 103H-1 PIN & SHAFT STYLE 6.50 DATE CODE (.256) 6.50 (.256) 8.20 103G-1 8.20 DATE CODE 103G-1 MFG. LOCATION Sea Level ................................500 VAC DATE CODE MFG. LOCATION (0.256) TAIWAN (0.256) TAIWAN MFG. LOCATION (0.323) MFG. LOCATION (0.323) TAIWAN TAIWAN 70,000 Feet .............................350 VAC 1 2 3 1 2 3 0.76 0.76 Adjustment Angle.................... 330 nom. TYP. TYP. 1 2 33 1 2 (.030)(.030) 2.49 0.10 2.49 2.49 0.10 2.49 2.49 0.10 2.492.49 2.49 0.10 (0.098 0.004) (0.098)(0.098) Environmental Characteristics (0.098 0.004) (0.098 0.004) (0.098) (0.098 0.004) (0.098) 14.90 14.90 12.0412.04 Power Rating (16 volts max.) (0.587)(0.587) (0.474) CHAMFER TYP. (0.474) CHAMFER TYP. 0.600.60 5.0 +0.0/-0.15.0 +0.0/-0.1 TYP. TYP. 50 C ...................................... 0.05 watt 5.49 0.200.20 5.49 (0.024) (.197 +0.0/-.004) 0.200.20 (0.024) 45 45 XX (.197 +0.0/-.004) 5.40 0.50 7.507.50 5.40 0.50 (0.216) (.008)(.008) 120 C ......................................... 0 watt (0.216) 4 PLCS. 4 PLCS. DIA.DIA. (0.008) (0.008) (.295)(.295) 5.0 +0.0/-0.15.0 +0.0/-0.1 (.213 .020)(.213 .020) 0.76 0.100.76 0.10 Operating Temperature Range (0.197 +0.0/-0.004)(0.197 +0.0/-0.004) (0.030 0.004) (0.030 0.004) DIA................................ -40 C to +120 C DIA. Temperature Coefficient ......500 ppm/C Humidity................................. TRS 20 % Shock........ 20 G TRS 10 % VRS 10 % 0.200.20 6.90 0.506.90 0.50 2.112.11 45 45 XX Load Life 50 C Rated Power (0.039)(0.039) (.272 .020)(.272 .020) (0.083)(0.083) 0.790.79 CHAMFER ..................................... TRS +10/-20 % CHAMFER MOUNTINGMOUNTING TYP.TYP. 5.005.00 TYP. (.031)(.031) TYP. SURFACE SURFACE Rotational Life................1,000,000 cycles 0.20 0.20 (.197)(.197) 1.021.02 12.04 1.0 +0.05/-0.10 TYP.TYP. 12.04 1.0 +0.05/-0.10 TRS 20 % (.008)(.008) DIA. DIA. (0.040)(0.040) 1.931.93 (.474)(.474) (.039 +.020/.004)(.039 +.020/.004) Thermal Shock ...........................5 cycles 2.82.8 1.021.02 (.076)(.076) TYP. TYP. 3.003.00 (.110) TRS 20 % VRS 10 % (0.040)(0.040) (.110) 0.970.97 (.118)(.118) 3.5 3.5 Moisture Sensitivity Level .......................1 8.50 0.108.50 0.10 (.038)(.038) (.138) (.138) (0.335 0.004) ESD Classification (HBM) ................... N/A (0.335 0.004) 1.0 +0.05/-0.101.0 +0.05/-0.10 MOUNTING MOUNTING 2.90 2.90 SURFACE (0.04 +.002/-.004) SURFACE (0.04 +.002/-.004) (.114) (.114) Physical Characteristics DIA. 2 PLCS. DIA. 2 PLCS. Mechanical Angle ......Continuous rotation 0.1 0.1 NOTE: ALL TERMINATIONS TO BE COPLANAR WITHIN NOTE: ALL TERMINATIONS TO BE COPLANAR WITHIN (0.001) (0.001) Torque................................30 gf-cm max. Recommended Land Patterns Weight ................Approximately 0.0321 g Recommended Land Pattern Marking .......................... Resistance code and date code 5.2 8.50 5.2 8.50 5.5 5.5 (.205) (.335) Standard Packaging (.205) (.335) (.217) (.217) DIA. DIA. G Style ....................1000 pcs./13 reel 5.8 5.8 7.2 H Style .............................. 50 pcs./tube 7.2 (.228) (.228) (.283) IP Rating ........................................... IP40 (.283) DIA. 4 PLCS. DIA. 2 PLCS. DIA. 4 PLCS. DIA. 2 PLCS. 7.0 7.0 1.0 +0.1/-0.0 1.1 1.0 +0.1/-0.0 1.1 (.276) (.276) (.039 +.004/-0.0) (.043) (.039 +.004/-0.0) (.043) 6.7 6.7 8.7 Standard Resistance Table 8.7 (.264) (.264) (.343) (.343) 2.1 2.50 2.1 2.50 Resistance Resistance (.083) (.098) (.098) (.083) 5.00 (Ohms) Code 5.00 1.8 (.197) 1.8 (.197) 2,500 252 5.5 5.00 (.071) 5.5 5.00 (.071) 5,000 502 (.217) (.197) (.217) (.197) 10,000 103 DIA. DIA. 4 PLCS. DIA. DIA. 4 PLCS. 25,000 253 MM 5.21 0.12 1.4 5.21 0.12 DIMENSIONS: 1.4 50,000 503 (.205 .005) (INCHES) (.055) (.205 .005) (.055) 100,000 104 3.0 3.0 (.118) (.118) 5.5 5.5 WIPER (.217) 2 (.217) 7.493 7.493 (.295) CCW CW (.295) 1 3 2 PLCS. 2 PLCS. CLOCKWISE 7.0 7.0 (.276) (.276) DIA. 4 PLCS. 2.50 DIA. 4 PLCS. 2.50 1.0 +0.05/-0.10 (.098) 1.0 +0.05/-0.10 (.098) (.039 +.002/-.004) 5.00 (.039 +.002/-.004) 5.00 (.197) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov (.197) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. 0.30 Specifications are subject to change without notice. TOLERANCES: UNLESS OTHERWISE NOTED (.012) Users should verify actual device performance in their specific applications. 0.86 0.08 0.86 0.08 The products described herein and this document are subject to specific legal disclaimers as set forth on the0.86 0.08 last page of 0.86 0.08 (.034 .003) (.034 .003) (.034 .003) this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.02 0.76 (.034 .003) ORIENTATION FEATURE ORIENTATION FEATURE 1.02 0.76 (.040) ORIENTATION FEATURE (.030)) ORIENTATION FEATURE (.040) (.030)) 4.0 +0.102/-0.051 3.51 0.05 4.0 +0.102/-0.051 3.51 0.05 (.158 +.004/-.002) (.138 .002) (.158 +.004/-.002) (.138 .002) DIA. DIA. DIA. DIA. 2.97 0.05 2.438 0.05 2.97 0.05 2.438 0.05 (.117 .002) (.096 .002) (.117 .002) (.096 .002) 3.023 0.05 2.515 0.05 3.023 0.05 2.515 0.05 (.119 .002) (.099 .002) (.119 .002) (.099 .002) *RoHS and AEC-Q200 COMPLIANT 237T 237T 237T 237T11.00 11.00 11.00 11.00 (.433) (0.433) (.433) (0.433) 5.54 5.54 5.54 40 5.54 40 3.58 3.58 2 (0.218) (0.218) 2 2 2 (.218) 40 (.218) 40 3.58 (.141) (.141) 3.58 (.141) (.141) RESISTANCE CODE, RESISTANCE CODE, PIN & SHAFT STYLE RESISTANCE CODE, PIN & SHAFT STYLE 6.50 6.50 RESISTANCE CODE, 103H-1 103H-1 PIN & SHAFT STYLE DATE CODE PIN & SHAFT STYLE 6.50 DATE CODE 6.50 (.256) (.256) 8.20 8.20 103G-1 103G-1 DATE CODEDATE CODE MFG. LOCATIONMFG. LOCATION (0.256) TAIWAN TAIWAN (0.256) MFG. LOCATION (0.323) MFG. LOCATION (0.323) TAIWAN TAIWAN 1 2 3 1 2 3 0.76 0.76 TYP. TYP. 1 2 3 1 2 3 (.030) (.030) 2.49 0.10 2.49 2.49 0.10 2.49 2.49 2.49 0.102.49 0.10 2.49 (0.098) (0.098 0.004)(0.098 0.004) (0.098) (0.098 0.004) (0.098) (0.098) (0.098 0.004) 14.90 14.90 12.04 12.04 (0.587) (0.587) (0.474) CHAMFER TYP. (0.474) CHAMFER TYP. 0.60 5.0 +0.0/-0.1 0.60 5.0 +0.0/-0.1 TYP. TYP. 5.49 0.20 0.20 5.49 (0.024) (.197 +0.0/-.004) 0.20 (0.024) 45 X (.197 +0.0/-.004) 0.20 45 X 7.50 5.40 0.505.40 0.50 7.50 (.008) (0.216) 4 PLCS. (.008) (0.216) 4 PLCS. DIA. DIA. (0.008) (0.008) (.295) 5.0 +0.0/-0.1 (.213 .020) (.295) 5.0 +0.0/-0.1 (.213 .020) 0.76 0.100.76 0.10 (0.197 +0.0/-0.004)(0.197 +0.0/-0.004) (0.030 0.004) (0.030 0.004) DIA. DIA. 0.20 0.20 6.90 0.506.90 0.50 2.11 2.11 45 X 45 X (0.039) (0.039) (.272 .020) (.272 .020) (0.083) (0.083) 0.79 0.79 CHAMFER CHAMFER MOUNTING MOUNTING TYP. 5.00 5.00 TYP. (.031) TYP. TYP. (.031) SURFACE SURFACE 0.20 0.20 (.197) (.197) 1.02 1.02 TYP. 12.04 12.041.0 +0.05/-0.101.0 +0.05/-0.10 TYP. (.008) (.008) DIA. DIA. (0.040) (0.040) 1.93 1.93 (.474) (.039 +.020/.004) (.474) (.039 +.020/.004) 1.02 2.8 2.8 1.02 (.076) (.076) TYP. 3.00 TYP. 3.00 (.110) (0.040) (0.040) (.110) 0.97 0.97 (.118) (.118) 3.5 3.5 8.50 0.108.50 0.10 (.038) (.038) (.138) (.138) (0.335 0.004)(0.335 0.004) 1.0 +0.05/-0.10 1.0 +0.05/-0.10 MOUNTING 2.90 MOUNTING 2.90 (0.04 +.002/-.004) SURFACE (0.04 +.002/-.004) SURFACE (.114) (.114) DIA. 2 PLCS. DIA. 2 PLCS. 0.1 0.1 NOTE: ALL TERMINATIONS TO BE COPLANAR WITHINNOTE: ALL TERMINATIONS TO BE COPLANAR WITHIN (0.001) (0.001) 5.2 8.50 5.2 8.50 5.5 5.5 (.205) (.335) (.205) (.335) (.217) (.217) DIA. DIA. 5.8 5.8 7.2 7.2 (.228) (.228) (.283) (.283) DIA. 4 PLCS. DIA. 4 PLCS. DIA. 2 PLCS.DIA. 2 PLCS. 7.0 7.0 1.1 1.0 +0.1/-0.01.0 +0.1/-0.0 1.1 (.276) (.276) (.039 +.004/-0.0) (.043) (.039 +.004/-0.0) (.043) 6.7 6.7 8.7 8.7 (.264) (.264) (.343) (.343) 2.1 2.1 2.50 2.50 (.083) (.098) (.098) (.083) 5.00 5.00 1.8 1.8 (.197) (.197) 5.5 5.00 5.5 5.00 (.071) (.071) (.217) (.197) (.217) (.197) DIA. DIA. DIA. 4 PLCS.DIA. 4 PLCS. 5.21 0.125.21 0.12 1.4 1.4 (.205 .005) (.205 .005) (.055) (.055) 3.0 3.0 (.118) (.118) 5.5 5.5 (.217) (.217) 7.493 7.493 (.295) (.295) 2 PLCS. 2 PLCS. 7.0 7.0 (.276) (.276) DIA. 4 PLCS.DIA. 4 PLCS. 2.50 2.50 1.0 +0.05/-0.10 1.0 +0.05/-0.10 (.098) (.098) 3382 - 12 mm Rotary Position Sensor (.039 +.002/-.004)(.039 +.002/-.004) 5.00 5.00 (.197) (.197) Rotor Dimensions -1 0.86 0.08 0.86 0.08 0.86 0.08 -2 0.86 0.08 (.034 .003) (.034 .003) (.034 .003) (.034 .003) 1.02 1.02 0.76 0.76 ORIENTATION FEATURE ORIENTATION FEATURE ORIENTATION FEATURE ORIENTATION FEATURE (.040) (.040) (.030)) (.030)) 4.0 +0.102/-0.0514.0 +0.102/-0.051 3.51 0.05 3.51 0.05 (.158 +.004/-.002) (.158 +.004/-.002) (.138 .002)(.138 .002) DIA. DIA. DIA. DIA. 2.97 0.052.97 0.05 2.438 0.05 2.438 0.05 (.117 .002) (.117 .002) (.096 .002) (.096 .002) 3.023 0.05 3.023 0.05 2.515 0.05 2.515 0.05 (.119 .002) (.119 .002) (.099 .002)(.099 .002) Processing Information Process Description Materials Temperature Time Interval 1. Apply solder paste to test board Sn/Ag/Cu Alloy water Room temperature (8 - 10 mil thick) soluble or no clean solder paste Single sided epoxy glass (G10) (UL approved) PC board approx. 4x4x.06 in. 2. Place test units onto board 6 units/board 3. Ramp up Convection oven 2.5 C 0.5 /second 4. Preheat 150 C to 190 C 90 30 seconds 5. Time above liquidus 220 C 60-90 seconds 6. Peak temperature 260 C +0 /-5 10-20 sec. within 5 C of peak 7. Ramp down Room temperature 3 C 0.5 C/second 300 255 220 190 150 0 050 100 150 200 250 TIME (SECONDS) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. TEMPERATURE (C) 237T 237T 237T 237T