CAT10-223J4LF Bourns

Features RoHS compliant* Suitable for most types of soldering processes 4 isolated resistors in an 0804 size package Paper tape on plastic reel for automatic placement E24 series from 10 ohms to 1 megohm Concave termination style Resistance tolerance 5 % Model CAT10 - Chip Resistor Array Characteristics Product Dimensions Number of Elements ............. 4 (isolated) 0.15 (.006) Power Rating per Resistor 70 C .............................................0.0625 W Package Power Rating 70 C 0.20 0.10 0.30 0.15 ...............................................0.250 W 1.0 0.10 (.008 .004) (.012 .006) Operating Temperature Range (.039 .004) ...............................-55 C to +125 C Derated to 0 Load ..................+125 C 0.30 0.15 0.20 0.10 Max. Working Voltage ......................25 V (.012 .006) (.008 .004) Max. Overload Voltage ....................50 V 0.5 0.28 0.10 0.40 0.15 Resistance Tolerance .................... 5 % (.020) (.011 .004) (.015 .006) 2.0 0.10 Resistance Range/E24 Series (.079 .004) ........................10 ohms to 1 megohm plus Zero-ohm Jumper MM DIMENSIONS: T.C.R. ................................ 250 ppm/C (INCHES) Packaging ........... 10,000 pieces per reel 0.25 (.010) Construction Marking Land Pattern Protective Glass Overcoat Thick Film Resistive Element 0.50 0.25 ~ 0.30 Conductor (0.020) (0.010 ~ 0.012) Side Termination 0.45 (0.018) 1.45 ~ 1.85 (0.057 ~ 0.073) High Purity Alumina Substrate How To Order CA T 10 - 103 J 4 LF Chip Arrays Derating Curve Isolated Circuit Type 70 C 125 C T = Concave ISOLATED CIRCUITS 100 Model 80 87 6 5 10 = 0804 Package Size 60 40 Resistance Code RR RR 20 <10 ohms: R represents decimal 0 point (example: 4R7 = 4.7 ohms) 12 34 -55 40 60 80 100 120 140 160 10 ohms: First two digits are Ambient Temp. (C) signi cant, third digit represents number of zeros to follow (example: 474 = 470k ohms) Typical Part Marking 000 = Zero Ohm Jumper None on part. Label on reel will include Resistance Tolerance part number. J = 5 % Resistors 4 = 4 pcs. Terminations LF = Tin-plated (RoHS compliant) For Standard Values Used in Capacitors, Inductors, and Resistors, click here. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Speci cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications. *RoHS COMPLIANT Rated Load (%) Model CAT10 - Chip Resistor Array Soldering Pro le for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 C peak +255 C and +260 C <1> 255 C 225 220 C 190 C 60 - 90 seconds 175 150 C Ramp Down 6 C/second 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 C/second maximum 25 0 50 100 150 200 250 300 Time (seconds) Packaging Dimensions 2.0 0.5 1.5 + 0.1 - 0 4.0 0.1 0.5 MAX. (.079 .020) 13.0 0.2 (.059 + .004 - 0) (.158 .004) (.020) (.511 .008) 3.5 0.05 60 (.138 .002) (2.362) 8.0 0.2 (.315 .008) 2.3 0.2 9.0 0.3 (.090 .008) (.354 .012) 21.0 0.8 1.0 1.3 0.2 2.0 0.05 (.827 .031) MAX. 180 (.040) (.051 .008) (.079 .002) (7.087) 11.4 1.0 (.449 .040) MM DIMENSIONS: (INCHES) REV. 01/15 Speci cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their speci c applications. Temperature (C)