Features Sulfur-resistantdesign RoHScompliant* Convexterminationstyle 2or4isolatedelementsinan04package This series is currently available, but not width recommended for new designs. The Resistancetolerance:5% Model CAY10A-AS Series is the recommended replacement. Resistancerange:3ohmsto1megohm &zero-ohmjumper CAY10-AS Series - Sulfur-Resistant Thick Film Chip Arrays How To Order General Characteristics CA Y 10 - 103 J 4 AS Characteristic CAY10-xxxJ2AS CAY10-xxxJ4AS Chip Array Number of Elements (Isolated) 2 4 Type Y = Convex Power Rating 70 C per Resistor 63 mW Model Resistor Tolerance 5 % 10 = 04 Package Width Resistance Code Resistance Range (E24) 3 ohms to 1 megohm First two digits are significant, plus Zero-ohm Jumper third digit represents number of Temperature Coefficient of Resistance 3 ~9.1 : 400 ppm 3 ~9.1 : 500 ppm zeros to follow (TCR) 10 ~1 M: 200 ppm 10 ~1 M: 250 ppm (example: 103 = 10K ohms) 000 = Zero-ohm jumper Maximum Overload Voltage 100 V Resistance Tolerance Maximum Working Voltage 50 V J = 5 % Operating Temperature Range -55 to +125 C Resistors 2 = 2 Resistors Storage Conditions +5 ~ +40 C, 25~75 % RH, 1 year 4 = 4 Resistors Derating Temperature +70 C Special Characteristics AS = Sulfur-resistant, Tin-plated terminations Packaging (Paper Tape) 10,000 pcs. per reel (RoHS compliant) Zero-ohm Jumper: Current Rating 1 A per element For Standard Values Used in Capacitors, Maximum Resistance 50 milliohms Inductors, and Resistors, click here. Construction Environmental Characteristics Protective Specification Test Method (JIS C 5201-1) Characteristics Glass Overcoat Thick Film Short Time Resistive Element Rated voltage x 2.5, 5 seconds (2 % +0.1 ohm) Overload Soldering Heat +260 C 5 C, 10 1 seconds (1 % +0.05 ohm) Temperature -55 C (30 minutes) - normal (30 minutes) (1 % +0.05 ohm) Cycling +125 C (30 minutes) - normal (30 minutes) Moisture Load 1000 hours (3 % +0.1 ohm) Life Load Life 1000 hours (3 % +0.1 ohm) Sulfur Test 3 ppm H2S, +50 C, 90~95 % RH, 100 hours (5 % +0.1 ohm) Termination High Purity Alumina NOTE: Zero-ohm jumper <50 milliohms except sulfur test <100 milliohms. Substrate Soldering Profile 275 <1> Maximum of 20 seconds between 260 C peak +255 C and +260 C <1> 255 C 225 220 C 190 C 60 - 90 seconds 175 150 C Ramp Down 6 C/second WARNING Cancer and Reproductive Harm 125 60 - 120 seconds www.P65Warnings.ca.gov 10 seconds minimum *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specications are subject to change without notice. 75 Ramp Up Users should verify actual device performance in their specic 3 C/second maximum applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the 25 last page of this document, and at 0 50 100 150 200 250 300 Time (seconds) www.bourns.com/docs/legal/disclaimer.pdf *RoHS COMPLIANT Temperature (C)CAY10-AS Series - Sulfur-Resistant Thick Film Chip Arrays Derating Curve Isolated Circuits Typical Part Marking 70 C 125 C CAY10-xxxJ2AS CAY10-xxxJ4AS Marking.........Refer to Product Dimensions 100 4 3 8 7 6 5 80 Marking Color ...................................Yellow 60 40 R R R R R R 20 0 -55 40 60 80 100 120 140 160 1 2 3 4 1 2 Ambient Temp. (C) Product Dimensions CAY10-xxxJ2AS Dim. CAY10-xxx-J2AS D A C 1.00 0.20 L (0.039 0.008) 1.00 0.20 W (0.039 0.008) 0.33 0.15 A (0.013 0.006) W 0.20 0.15 D C (0.008 0.006) 0.25 0.10 D (0.010 0.004) C 0.35 0.05 P T T (0.014 0.002) L 0.65 0.10 P (0.026 0.004) CAY10-xxxJ4AS Dim. CAY10-xxx-J4AS C 2.00 0.20 A1 A2 B L (0.079 0.008) 1.00 0.15 W (0.039 0.006) 0.40 0.15 A1 (0.016 0.006) W 0.30 0.15 A2 C (0.012 0.006) 0.20 0.05 B (0.008 0.002) B 0.20 0.15 T C P (0.008 0.006) L 0.35 0.10 T (0.014 0.004) MM DIMENSIONS: 0.50 0.05 P (INCHES) (0.020 0.002) Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Rated Load (%)