CDNBS04-B08200 Bourns

This series is currently available but Features not recommended for new designs. RoHS compliant* Small SMT package Applications High reliability with superior moisture Switching power supply resistance Home appliances, office equipment Applicable to automatic insertion Telecommunication, factory automation CDNBS04-B08200~B08800 Surface Mount Rectifier General Information The CDNBS04-B08200~B08800 device provides Bridge Rectification with high 4 1 reliability with superior moisture resistance for home appliances, office equipment and telecommunications. The device provide 0.8 A rectification with a choice of repetitive peak reverse voltages from 200 V to 800 V. The device measures 5 mmx7mmand is available in a four lead SMT package intended to be mounted directly onto an FR4 printed circuit board. 3 2 Electrical Characteristics ( T = 25 C Unless Otherwise Noted) A CDNBS04- Parameter Symbol Unit B08200 B08400 B08600 B08800 Maximum Repetitive V 200 400 600 800 V RRM Peak Reverse Voltage Maximum RMS Voltage V 140 280 420 560 V RMS Maximum DC Blocking Voltage V 200 400 600 800 V DC Maximum Average Forward I 0.8 A 1 (AV) Rectified Current TA = 40 C Maximum DC Reverse Current I 5 A R T =25C J Maximum DC Reverse Current I 100 A R T =100 C J Maximum Forward Voltage V 1.15 V F 0.4 A DC 2 2 2 3.7 I t Rating for Fusing (T < 8 ms) I t A S Maximum Recovery Time T 150 200 500 ns RR 2 Typical Thermal Resistance R 50 C/W JA Typical Junction Capacitance C 13 pF 3 J per element Peak forward surge current 8.3 ms single half sine-wave superimposed I 30 A FSM on rated load (JEDEC Method) Notes: 1 Mounted on PC Board. See Forward Derating Curve. 2 Thermal Resistance from Junction to Ambient. 3 Measured at 1 MHz and applied Reverse Voltage of 4.0 VDC. Thermal Characteristics ( T = 25 C Unless Otherwise Noted) A Parameter Symbol CDNBS04-B08200~B08800 Unit Operating Temperature Range TJ -55 to +150 C Storage Temperature Range TSTG -55 to +150 C *RoHS Directive 2015/863, Mar 31, 2015 and Annex. WARNING Specications are subject to change without notice. Users should verify actual device performance in their specic Cancer and Reproductive Harm applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the www.P65Warnings.ca.gov last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANTCDNBS04-B08200~B08800 Surface Mount Rectifier Product Dimensions Recommended Footprint This is a molded package weighs approximately 0.125 g and can The device will mount onto existing JEDEC SOD-106 footprint. be mounted in any position. The dimensions for the packaged device are shown below. 4.50 - 4.90 (0.177 - 0.193) 4.50 - 4.90 2.30 - 2.70 (0.177 - 0.193) (0.091 - 0.106) 1.20 - 1.60 2.30 - 2.70 (0.047 - 0.063) (0.090 - 0.106) 0.70 - 1.10 (0.028 - 0.043) 3.60 - 4.00 7.00 MAX. (0.142 - 0.157) (0.276) 3.60 - 4.00 7.00 MAX. 1.30 - 1.70 (0.142 - 0.157) (0.276) (0.051 - 0.067) 0.50 - 0.80 0.15 - 0.35 (0.020 - 0.031) (0.006 - 0.014) 5 TYP. 0.50 - 0.80 (0.020 - 0.031) 3.00 2.30 - 2.70 MAX. (0.118) (0.091 - 0.106) MM DIMENSIONS: (INCHES) 0.20 MAX. (0.008) MM How To Order DIMENSIONS: (INCHES) CD NBS04 - B 08 800 Common Code CD=ChipDiode Block Diagram Package NBS04 The block diagram below includes the pin names and basic Model Series electrical connections associated with each channel. B = Bridge Rectifier Maximum Rectified Current 4 1 08 = 100 mA Working Peak Reverse Voltage 200=200V RWM 400 = 400 V RWM 600 = 600 V RWM 800 = 800 V RWM Typical Part Marking CDNBS04-B08200 ............................................................ 8 200 CDNBS04-B08400 ............................................................ 8 400 CDNBS04-B08600 ............................................................ 8 600 CDNBS04-B08800 ............................................................ 8 800 3 2 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.